Question: A common procedure for measuring the velocity of an air stream involves insertion of an electrically heated wire (called a hot-wire anemometer) into the air

A common procedure for measuring the velocity of an air stream involves insertion of an electrically heated wire (called a hot-wire anemometer) into the air flow, with the axis of the wire oriented perpendicular to the flow direction. The electrical energy dissipated in the wire is assumed to be transferred to the air by forced convection. Hence, for a prescribed electrical power, the temperature of the wire depends on the convection coefficient, which, in turn, depends on the velocity of the air. Consider a wire of length L = 20 mm and diameter D = 0.5 mm, for which a calibration of the form, V = 6.25 X 10- 5 h 2, has been determined. The velocity V and the convection coefficient h have units of m/s and W/m2. K respectively In an application involving air at a temperature of T∞, = 25°C, the surface temperature of the anemometer is maintained at Ts = 75°C with a voltage drop of 5 V and an electric current of 0.1 A. What is the velocity of the air?

Step by Step Solution

★★★★★

3.30 Rating (159 Votes )

There are 3 Steps involved in it

1 Expert Approved Answer

Step: 1 Unlock

KNOWN Length diameter and calibration of a hot wire anemometer Temperature of ... View full answer

Question Has Been Solved by an Expert!

Get step-by-step solutions from verified subject matter experts

Step: 2 Unlock

Step: 3 Unlock

Document Format (1 attachment)

8-P-T-H-M-T (17).docx

120 KBs Word File

Students Have Also Explored These Related Mechanical Engineering Questions!

At the instant shown during deceleration, the velocity of an automobile is 12 m/s to the right. Knowing that the velocity of the contact point A of the wheel with the ground is 1.5 m/s to the right,...

At the instant shown during acceleration, the velocity of an automobile is 12 m/s to the right. Knowing that the velocity of the contact point A of the wheel with the ground is 1.5 m/s to the left,...

At the instant shown during deceleration, the velocity of an automobile is 40 ft/s to the right. Knowing that the velocity of the contact point A of the wheel with the ground is 5 ft/s to the right,...

A hot-wire anemometer is essentially a fine wire, often made of platinum (Pt), which is heated electrically while exposed to a flowing fluid. The wire temperature, which is a function of the fluid...

Temperature distribution in a hot-wire anemometer, a hot-wire anemometer is essentially a fine wire, usually made of platinum, which is heated electrically and exposed to a flowing fluid. Its...

Background: A hot - wire anemometer is essentially a fine wire, usually made of platinum, which is heated electrically and inserted into a flowing fluid. The wire temperature, which is a function of...

A common procedure for measuring the velocity of an airstream

A fine, cylindrical wire of diameter D and length L is positioned across a passage to determine the velocity of air U based on heat transfer characteristics. Current I is passed through the wire to...

A common procedure for increasing the moisture content of air is to bubble it through a column of water. The air bubbles are assumed to be spheres, each having a radius of 1.0 mm, and are in thermal...

Consider Problem 14.41. (a) How long should the bubbles remain in the water to achieve an average vapor concentration that is 95% of the maximum value? (b) How long should the bubbles remain in the...

State four factors that determine the rate of diffusion of materials.

Randy and Sherry form a general partnership-The Manhattan Partnership-as equal partners. Randy contributes an office building with a $117,000 FMV and a $85,500 adjusted basis to the partnership,...

Homework 9 : Problem 4 ( 1 5 points ) Let f ( x , y ) = x e x 2 - y and P = ( 2 , 4 ) . ( a ) Calculate | | g r a d f P | | . ( b ) Find the rate of change of f in the direction g r a d f P . ( c )...

Refer to the American Journal of Science (Jan., 2005) study of the chemical makeup of buried glacial drifts (tills), Exercise 2.22 (p. 38). The data on the Al/Be ratios for a sample of 26 buried till...

How is the consumers motive to smooth consumption captured by the shape of an indifference curve?

A parallel RLC resonant circuit with a resonant frequency of 20,000rad/s has admittance at resonance of 1ms. If the capacitance of the network is 5F, find the values of R and L.

One of the largest single influences on the level of interest rates is inflation. There are a number of sites that report inflation over time. Go to www.bankofcanada.ca/rates/price-indexes/cpi and...

A 50-W lossless line terminated in a purely resistive load has a Voltage standing wave ratio of 3. Find all possible values of ZL.

What is the difference between a simple random sample and a systematic sample?

A nanolaminated material is fabricated with an atomic layer deposition process, resulting in a series of stacked, alternating layers of tungsten and aluminum oxide, each layer being = 0.5 nm thick....

Determine the heat transfer rate between two particles of diameter D = 100 m and temperatures T 1 = 300.1 K and T 2 = 299.9 K, respectively. The particles are in contact and are surrounded by air. T1...

The table below includes the four brightest single stars visible from Earth. The star temperature, star radius (one solar radius is equal to the radius of the sun), and distance between the star and...

Approximations to Planck's law for the spectral emissive power are the Wien and RayleighJeans spectral distributions, which are useful for the extreme low and high limits of the product \(\lambda...

An enclosure has an inside area of $50 \mathrm{~m}^{2}$, and its inside surface is black and is maintained at a constant temperature. A small opening in the enclosure has an area of \(0.01...

Schnusenberg Corporation just paid a dividend of D0 = $0.75 per share, and that dividend is expected to grow at a constant rate of 6.50% per year in the future. The company's beta is 1.25, the...