Repeat Prob. 13117 for an upstream flow depth of 1.4 m. Data from Problem 13117 A 0.80-m-high

Question:

Repeat Prob. 13–117 for an upstream flow depth of 1.4 m.

Data from Problem 13–117

A 0.80-m-high broad-crested weir is used to measure the flow rate of water in a 5-m-wide rectangular channel. The flow depth well upstream from the weir is 1.8 m. Determine the flow rate through the channel and the minimum flow depth above the weir.

FIGURE P13–117

Fantastic news! We've Found the answer you've been seeking!

Step by Step Answer:

Related Book For book-img-for-question

Fluid Mechanics Fundamentals And Applications

ISBN: 9780073380322

3rd Edition

Authors: Yunus Cengel, John Cimbala

See More Books

Question Posted: Sep 18, 2023 06:01 AM

See More Questions

Repeat Prob. 13114 for an upstream flow depth of 0.90 m. Data from Problem 13-114 The flow rate of water flowing in a 5-m-wide channel is to be measured with a sharp-crested triangular weir 0.5 m...
A 0.80-m-high broad-crested weir is used to measure the flow rate of water in a 5-m-wide rectangular channel. The flow depth well upstream from the weir is 1.8 m. Determine the flow rate through the...
The crest of a standard, USBR 90V-notch weir is 3 feet above the bottom of an irrigation channel. It is used to measure 25.6 cfs of flow to a customer. At this flow rate, the depth of water upstream...
A three-phase line has an impedance of 1 + j3 per phase. The line feeds a balanced delta-connected load, which absorbs a total complex power of 12 + j5 k VA. If the line voltage at the load end has...
Look up prices of 10 U.S. Treasury bonds with different coupons and different maturities. Calculate how their prices would change if their yields to maturity increased by 1 percentage point. Are...
14.20 A business has creditors at its year-end of 206 460. Purchases for the year are 1 952 278, of which 90% were made on credit. What is the creditors turnover period? a) 42.9 days b) 38.6 days c)...
What is the main goal of project cost management? a. to complete a project for as little cost as possible b. to complete a project within an approved budget c. to provide truthful and accurate cost...
Iridium Technologies manufactures a variety of flash memory chips at its main foundry in Anam, Korea. Some chips are sold by Iridium to makers of electronic equipment while others are embedded into...
Assignment 2 During 2020, ABC company had total Sales $10,675,500 including $3,000,000 cash sales. The AFDA had an unadjusted beginning debit balance on Dec31, 2020 of $31,500. Accounts Receivable...
McGuire decides to start slow with a project testing the increased automation of their horse feed line. Below are the projected cost of the expansion in automation, given a 5 year useful life of the...
Consider uniform water flow in a wide channel made of unfinished concrete laid on a slope of 0.0022. Now water flows over a 15-cm-high bump. If the flow over the bump is exactly critical (Fr = 1),...
A sharp-crested triangular weir with a notch angle of 100 is used to measure the discharge rate of water from a large lake into a spillway. If a weir with half the notch angle ( = 50) is used...
Write a CJUS research paper, the Components of the Research Paper are: Why the research is needed and what the general area of current concern is. What is already known about the general area of...
Consider a system consisting of a colloidal particle of radius and charge Q-+20e (e is the charge of an electron) stationary in the center of a spherical cavity of radius R=5. Its counterions have...
Use the Empirical Rule to determine the percentage of candies with weights between 0.7 and 0.98 gram. Hint: x=0.84.
A sample of 16 items provides a sample standard deviation of 9.5. Test the following hypotheses using a = .05. Ho: 0250 2 Ha > 50 a. Calculate the value of the test statistic (to 2 decimals). 27.08...
During May, Darling Company incurred factory overhead costs as follows: indirect materials, $1,170; indirect labor, $2,000; utilities cost, $1,270; and factory depreciation, $5,850. Journalize the...
Practice 1 Let f(0) = cos(0). For each interval in the table below, determine the characteristics of f(e) Positive or negative Increasing or decreasing Concave up or concave down Let g(0) = 00
With regard to the categories of individuals who may practice before the IRS under Circular 230, which of the following statements is correct? Explain your answer. (IRS adapted) a. Only Circular 230...
Nitrogen monoxide reacts with hydrogen as follows: 2NO(g)+ H2(g) N2O(g) + H2O(g) The rate law is [H2]/ t = k[NO]2[H2], where k is 1.10 107 L2/(mol2s) at 826oC. A vessel contains NO and H2 at...
The rocket nozzle shown below consists of three welded sections. Determine the axial stress at junctions 1 and 2 when the rocket is operating at sea level. The mass flow rate is 770 lb m /s. 3...
The pressure on the control volume illustrated below is constant. The x components of velocity are as illustrated. Determine the force exerted on the cylinder by the fluid. Assume in-compressible...
Water flows in a pipe at 3 m/s. A valve at the end of the pipe is suddenly closed. Determine the pressure rise in the pipe.
(15 points) Stressed $2.500,000 of S% 20 year bands. These bonds were issued Jary 1, 2017 and pay interest annually on each January 1. The bonds yield 3% and was issued at $325 8S! Required (2)...
Packaging Solutions Corporation manufactures and sells a wide variety of packaging products. Performance reports are prepared monthly for each department. The planning budget and flexible budget for...
1. A company issued 10%, 10-year bonds with a par value of $1,000,000 on January 1, at a selling price of $885,295 when the annual market interest rate was 12%. The company uses the effective...

Repeat Prob. 13117 for an upstream flow depth of 1.4 m. Data from Problem 13117 A 0.80-m-high

Question:

1.8 m 0.80 m Discharge Broad-crested weir

Step by Step Answer:

To calculate the flow rate of water over a broadcrested weir we use the followi...View the full answer

Fluid Mechanics Fundamentals And Applications

Students also viewed these Engineering questions