10A11 Applying Overhead; Overhead Variances [LO3, LO4] Wymont Company produces a single product that requires a large amount of labor time. Overhead cost is applied on the basis of standard direct labor-hours. Variable manufacturing overhead should be $2.00 per standard direct labor-hour and fixed manufacturing overhead should be $180,000 per year. The companys product requires 4 feet of direct material that has a standard cost of $3.00 per foot. The product requires 1.5 hours of direct labor time. The standard labor rate is $12.00 per hour. During the year, the company had planned to operate at a denominator activity level of 30,000 direct labor-hours and to produce 20,000 units of product. Actual activity and costs for the year were as follows: Required: 1. Compute the predetermined overhead rate for the year. Break the rate down into variable and fixed components. 2.Prepare a standard cost card for the companys product; show the details for all manufacturing costs on your standard cost card. 3. a. Compute the standard direct labor-hours allowed for the years production. 33,000 standard DLHs b.Complete the following Manufacturing Overhead T-account for the year: 4. Determine the reason for the underapplied or overapplied overhead from (3) above by computing the variable overhead rate and efficiency variances and the fixed overhead budget and volume variances. Budget variance: $1,000 U 5. Suppose the company had chosen 36,000 direct labor-hours as the denominator activity rather than 30,000 hours. State which, if any, of the variances computed in (4) above would have changed, and explain how the variance(s) would have changed. No computations are necessary.