2.0 Project Scenario This scenario of this project is referring to Figure 1. Figure 1 shows the logical network flow from a home network to UTEM facilities. In this figure, a UTEM's lecture is trying to access the ULearn system located in the UTEM network facilities. The lecturer is using his modem to connect to the public network before able to connect to the UTEM facilities. From the UTEM network, the data then was forwarded to IT Center where the ULearn System server is located. Cloud T nter UTEM UTEM Lecdurer Home Network Figure 1: Logical Network Flow In term of private addressing scheme, UTEM network is using Class C private addressing scheme which is 192.168.0.0/16. In UTEM facilities, there are 30 different departments. Hence, the network address was segregated by using subnetting concept. Each department is given their network address. In this case, IT Center is being assigned as the 11th available subnet as their network address. From this network address, the ULearn System server is assigned as the 3rd available address. Use this information to identify the address of the ULearn System server. 3.1 Project Report For this project, each team is expected to produce a writing related to the project scenario. From the scenario, you are expecting to produce report on three major sections which are: 1. OSI Layer Model In this section, you are expecting to explain on how the data travels from the lecturer's computer to reach the ULearn System server which is in the UTEM IT Center. The explanation should be related the OSI Layer Model. Explain the possible network components involves throughout the communications. Illustrate the diagram to support your explanation. 2. Subnetting Calculation In this section, you are expecting to show the calculation on how to identify the IP address that was assigned for the ULearn System Server based on the information given in the project scenario. Explain the concept and show the calculation to identify the IP address. 3. TCP/IP Setting Manual In this section, you are assumed have correctly identified the IP address for the ULearn System Server. Therefore, you must produce a manual on how to configure the IP address on the server. You can use any operating system to demonstrate this task. The explanation should be supported with the screenshot and appropriate explanation.