2.One latch or flip-flop can store one bit of information. a) Multiple bits of information b) Two bits of information c) one bit of information. 3. There are basically four main types of latehes and flip-flops: they are 4. SR Latch is also called as Latch. 5. The group of bits 11001 is serially shifted (right-most bit first) into a 5-bit parallel output shift register with an initial state 01110 . After three clock pulses, the register contains a:01110b:00001c:00101 d : 00101 6. If S=1 and R=1 then the output of SR latch is a) Reset b) Set c) Indeterminent d) Both a and b. 7. The D Latch is also called as . a) Delay flip-flop b) delay latch c) Both a and b. d) None of these. 8. The Ic's used to construct a D- latch or Flip flops are. a) 7400 and 7404 b) 7402 and 7404 c) 7408 and 7404 (9.) T-flip flop is called as. Flip flip. 10. A flip-flop is a multivibrator. a) Bistable b) Monostable c) Tri stable. d) None of these. 11. The main difference between latches and flip-flops is that for latches, their outputs are constantly affecte by their as long as the enable signal is asserted. a) clock b) outputs c) inputs d) Enable. 12. The out put of the JK flip flop will be Toggle if the a) J=0&k=0 b) J=0&K=1 and E=1 C) J=1,K=1 and E=1 d) J=1&K=1. 13. The given diagram is a) Divide by 3 Counter b) Divide by 2 Counter c) Divide by 1 counter