3 questions from my "Connecting Networks" course

Choose the packets below that will provide a match for the following ACL statements. deny tcp host 10.1.1.45 192.168.9.0 0.0.0.255 eq telnet deny tcp 144.5.99.0 0.0.0.255 any eq ftp permit tp any 138.54.0.0 0.0.255.255 eq 80 SRC: 138.54.6.2 DST: 33.125.90.5 HTTP SRC: 144.5.99.33 DST: 67.12.1.1 FTP SRC: 33.125.90.5 DST: 138.54.6.2 SRC: 10.1.1.1 DST: 192.168.9. telnet SRC: 144.5.99.1 DST: 103.31.1. HTTP SRC: 10.1.1.45 DST: 192.168.9.44 telnet SRC: 209.65.87.22 DST: 144.54.22.1 FTP Choose which of the IP addresses below will provide a match for the ACL statement: access-list 1 permit 188.90.99.128 0.0.0.127 188.90.99.155 188.90.90.201 188.90.99.200 188.90.99.1 10.0.0.199 10.0.1.0 /24 R1 192.163.1.0/30 192 168.1.4130 R3 R2 10.0.3.0 /24 10.0.2.0 /24 Image: Cisco Packet Tracer capture Enter the command to apply the R1 ACL to this interface for traffic leaving the interface R1 (config) # interface g0/0 R1 (config-if) # Choose the packets below that will provide a match for the following ACL statements. deny tcp host 10.1.1.45 192.168.9.0 0.0.0.255 eq telnet deny tcp 144.5.99.0 0.0.0.255 any eq ftp permit tp any 138.54.0.0 0.0.255.255 eq 80 SRC: 138.54.6.2 DST: 33.125.90.5 HTTP SRC: 144.5.99.33 DST: 67.12.1.1 FTP SRC: 33.125.90.5 DST: 138.54.6.2 SRC: 10.1.1.1 DST: 192.168.9. telnet SRC: 144.5.99.1 DST: 103.31.1. HTTP SRC: 10.1.1.45 DST: 192.168.9.44 telnet SRC: 209.65.87.22 DST: 144.54.22.1 FTP Choose which of the IP addresses below will provide a match for the ACL statement: access-list 1 permit 188.90.99.128 0.0.0.127 188.90.99.155 188.90.90.201 188.90.99.200 188.90.99.1 10.0.0.199 10.0.1.0 /24 R1 192.163.1.0/30 192 168.1.4130 R3 R2 10.0.3.0 /24 10.0.2.0 /24 Image: Cisco Packet Tracer capture Enter the command to apply the R1 ACL to this interface for traffic leaving the interface R1 (config) # interface g0/0 R1 (config-if) #