A plane flies in a directions 20 west of north for 800 km displacement D1 , from airport A airport B. The plane then departs from airport B heading in a direction 40 south of west for 300 km displacement, D2 to airport C. 1. Draw and determine using a ruler and protractor the result displacement magnitude, and direction of the plan using tail to tip method of vector addition. 2. Calculate the resultant displacement, both magnitude and direction of the plan, using the component method using calculations of vector addition. A projectile is shot from the edge of a cliff, unknown height at an initial velocity 80 M/S at an angle 30 above X axis . After 10.0 seconds, the projectile alarms on the ground at a distance, ask away from the base of the cliff. 1. Draw diagram, showing the projectile path, starting from the edge of the cliff to the ground show launching velocity factor with the components and landing velocity factor with that component. 2. Determine the height of the cliff 3. Determine the horizontal distance, ask, traveled by the projectile 4. Determine the maximum height reached by the projectile. Food supplies drops from an airplane when the airplane was 230 m above the ground and was traveling at 156 KM/H in the horizontal direction. 1. Try the diagram of the projectile path of the supplies starting from the point of released to the ground. 2. Using downward direction, positive Y and using kinematics equation, determine the time for the food supply to land on the ground on horizontal distance travel during this time