Answer assessment questions

MBA NSW RTO #6163 31 Below Ground and Remedial Waterproofing Workshop 27. Select from the list below using the manufacturer's Technical Data Sheet (TDS) the appropriate surface preparation prior to applying FCM Negative Pressure coating? Tick the correct responses) Tick Surface must be clean Coating can be applied over grease Surface Must be dry at Maximum 8% You can apply the coating over laitance or loose materials Surface Must be free from all deleterious materials Can be applied to damp surfaces What are the benefits of using two-part protective paint coating systems? 28. 29..... What type of primer would you use when applying a solvent based polyurethane positive pressure membrane system? Tick the correct answer. Tick Solvent based primer Acrylic primer Bitumen based primer Water based epoxy primer 30 . Which of the following statements is true or false? (tick the correct box) True / False a) Only timber substrates require priming when applying sealant devices ) The primer can be wet when applying a positive pressure Polyurethane coating c) Primers must be dry prior to applying sealant devices 20 00 d) Some primers can be tacky when applying sealant devices Below Ground and Remedial Waterproofing v1.0 Name. Page 12 of 35