Answer the questions below for this year and last year, using your SEC 10-K:

Link to SEC 10-K:http://d1lge852tjjqow.cloudfront.net/CIK-0000315189/ceea88ae-ba2b-4204-9b4a-2c9a06e40401.pdf?noexit=true

Also attached.

Category: Operating Activities

1. Net income versus total for operating activities: report these values.

2. Items of significance between net income and total for operating activities?

3. Is the business providing cash flow from operations?

Category: Investing and Financing Activities

1. Describe significant long term assets (type and amount) purchased, sold, or retired during the current period as well as last year.

2. Describe significant financing activities used by your corporation to increase cash (or other assets): these would be related to long term liabilities and stockholders equity.

Category:Analysis Overall Cash Flow (total of three sections): Compare this year to last year.

UNITED STATES SECURITIES AND EXCHANGE COMMISSION WASHINGTON, D.C. 20549 FORM 10-K ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934 FOR THE FISCAL YEAR ENDED OCTOBER 31, 2015 Commission file number 1-4121 DEERE & COMPANY (Exact name of registrant as specified in its charter) Delaware (State of incorporation) One John Deere Place, Moline, Illinois (Address of principal executive offices) 36-2382580 (IRS Employer Identification No.) 61265 (Zip Code) (309) 765-8000 (Telephone Number) SECURITIES REGISTERED PURSUANT TO SECTION 12(b) OF THE ACT Title of each class Common stock, $1 par value 8-1/2% Debentures Due 2022 6.55% Debentures Due 2028 Name of each exchange on which registered New York Stock Exchange New York Stock Exchange New York Stock Exchange SECURITIES REGISTERED PURSUANT TO SECTION 12(g) OF THE ACT: NONE Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes No Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. Yes No Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes No Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files). Yes No Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K (229.405 of this chapter) is not contained herein, and will not be contained, to the best of registrant's knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K. Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of \"large accelerated filer,\" \"accelerated filer\" and \"smaller reporting company\" in Rule 12b-2 of the Exchange Act. (Check one): Large accelerated filer Non-accelerated filer (Do not check if a smaller reporting company) Accelerated filer Smaller reporting company Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act). Yes No The aggregate quoted market price of voting stock of registrant held by non-affiliates at April 30, 2015 was $30,160,160,199. At November 30, 2015, 316,700,104 shares of common stock, $1 par value, of the registrant were outstanding. Documents Incorporated by Reference. Portions of the proxy statement for the annual meeting of stockholders to be held on February 25, 2016 are incorporated by reference into Part III of this Form 10-K. TABLE OF CONTENTS Page PART I ITEM 1. ITEM 1A. ITEM 1B. ITEM 2. ITEM 3. ITEM 4. BUSINESS RISK FACTORS UNRESOLVED STAFF COMMENTS PROPERTIES LEGAL PROCEEDINGS MINE SAFETY DISCLOSURES 2 10 16 16 16 16 MARKET FOR REGISTRANT'S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES SELECTED FINANCIAL DATA MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND FINANCIAL DISCLOSURE CONTROLS AND PROCEDURES OTHER INFORMATION 16 18 18 18 ITEM 13. ITEM 14. DIRECTORS, EXECUTIVE OFFICERS AND CORPORATE GOVERNANCE EXECUTIVE COMPENSATION SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT AND RELATED STOCKHOLDER MATTERS CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS, AND DIRECTOR INDEPENDENCE PRINCIPAL ACCOUNTANT FEES AND SERVICES PART IV ITEM 15. EXHIBITS AND FINANCIAL STATEMENT SCHEDULES 20 PART II ITEM 5. ITEM 6. ITEM 7. ITEM 7A. ITEM 8. ITEM 9. ITEM 9A. ITEM 9B. PART III ITEM 10. ITEM 11. ITEM 12. 1 17 17 17 17 17 18 18 19 19 ITEM 1. BUSINESS. Products Deere & Company (the Company) and its subsidiaries (collectively, John Deere) have operations that are categorized into three major business segments. The agriculture and turf segment primarily manufactures and distributes a full line of agriculture and turf equipment and related service parts including large, medium and utility tractors; loaders; combines, corn pickers, cotton and sugarcane harvesters and related front-end equipment and sugarcane loaders; tillage, seeding and application equipment, including sprayers, nutrient management and soil preparation machinery; hay and forage equipment, including self-propelled forage harvesters and attachments, balers and mowers; turf and utility equipment, including riding lawn equipment and walkbehind mowers, golf course equipment, utility vehicles, and commercial mowing equipment, along with a broad line of associated implements; integrated agricultural management systems technology and solutions; and other outdoor power products. The construction and forestry segment primarily manufactures and distributes a broad range of machines and service parts used in construction, earthmoving, material handling and timber harvesting including backhoe loaders; crawler dozers and loaders; four-wheel-drive loaders; excavators; motor graders; articulated dump trucks; landscape loaders; skid-steer loaders; and log skidders, feller bunchers, log loaders, log forwarders, log harvesters and related attachments. The products and services produced by the segments above are marketed primarily through independent retail dealer networks and major retail outlets. The financial services segment primarily finances sales and leases by John Deere dealers of new and used agriculture and turf equipment and construction and forestry equipment. In addition, the financial services segment provides wholesale financing to dealers of the foregoing equipment, finances retail revolving charge accounts and offers extended equipment warranties. John Deere's worldwide agriculture and turf operations and construction and forestry operations are sometimes collectively referred to as the \"equipment operations.\" The financial services segment is sometimes referred to as the \"financial services operations.\" Additional information is presented in the discussion of business segment and geographic area results on page 22. The John Deere enterprise has manufactured agricultural machinery since 1837. The present Company was incorporated under the laws of Delaware in 1958. The Company's internet address is http://www.JohnDeere.com. Through that address, the Company's annual report on Form 10-K, quarterly reports on Form 10Q, current reports on Form 8-K and amendments to those reports are available free of charge as soon as reasonably practicable after they are filed with the United States Securities and Exchange Commission (Securities and Exchange Commission or Commission). The information contained on the Company's website is not included in, or incorporated by reference into, this annual report on Form 10-K. Market Conditions and Outlook The Company's equipment sales are projected to decrease about 7 percent for fiscal year 2016 and decrease about 11 percent for the first quarter, compared with the same periods of 2015. For fiscal year 2016, net income attributable to Deere & Company is anticipated to be about $1.4 billion. Agriculture & Turf. The Company's agriculture and turf equipment sales are forecast to decrease by about 8 percent for 2016. Industry agricultural machinery sales in the U.S. and Canada for 2016 are forecast to decrease 15 to 20 percent, compared to 2015. Industry sales in the European Union (EU)28 nations are forecast to be approximately the same to 5 percent lower in 2016, while South American industry sales are projected to decrease about 10 to 15 percent from 2015 levels. Asian sales are projected to be about the same or decrease slightly in 2016. Industry sales of turf and utility equipment in the U.S. and Canada are expected to be approximately the same to 5 percent higher. Construction & Forestry. The Company's construction and forestry sales decreased 9 percent in 2015 and are forecast to decrease about 5 percent in 2016. The decrease in sales reflects the impact of weak conditions in the North American energy sector, especially in Canada, as well as lower sales outside the U.S. and Canada. Global forestry industry sales are expected to decrease about 5 to 10 percent from last year's strong levels, primarily as a result of lower sales in the U.S. and Canada. 2 Financial Services. Fiscal-year 2016 net income attributable to Deere & Company for the financial services operations is expected to be approximately $550 million. The outlook reflects a decline from 2015 due primarily to less favorable financing spreads and an increased provision for credit losses. Additionally, 2015 results benefited from a gain on the sale of the crop insurance business. 2015 Consolidated Results Compared with 2014 Worldwide net income attributable to Deere & Company in 2015 was $1,940 million, or $5.77 per share diluted ($5.81 basic), compared with $3,162 million, or $8.63 per share diluted ($8.71 basic), in 2014. Net sales and revenues decreased 20 percent to $28,863 million in 2015, compared with $36,067 million in 2014. Net sales of the worldwide equipment operations declined 22 percent in 2015 to $25,775 million from $32,961 million last year. Sales included price realization of 1 percent and an unfavorable currency translation effect of 5 percent. Equipment net sales in the United States and Canada decreased 18 percent for 2015. Outside the U.S. and Canada, net sales decreased 28 percent for the year, with an unfavorable currency translation effect of 10 percent for 2015. Worldwide equipment operations had an operating profit of $2,177 million in 2015, compared with $4,297 million in 2014. The operating profit decline was due primarily to lower shipment volumes, the impact of a less favorable product mix and the unfavorable effects of foreign currency exchange. These factors were partially offset by price realization, lower selling, administrative and general expenses and lower production costs. Net income of the company's equipment operations was $1,308 million for 2015, compared with $2,548 million in 2014. In addition to the operating factors mentioned above, a lower effective tax rate benefited the results. The lower rate resulted mainly from a reduction of a valuation allowance recorded during the fourth quarter due to a change in the expected realizable value of a deferred tax asset. Net income of the financial services operations attributable to Deere & Company in 2015 increased to $633 million, compared with $624 million in 2014. Results improved due to growth in the average credit portfolio, the previously announced crop insurance sale and higher crop insurance margins experienced prior to divestiture (see Note 4), and lower selling, administrative and general expenses. These factors were partially offset by the unfavorable effects of foreign currency exchange translation, less favorable financing spreads and higher losses on residual values primarily for construction equipment operating leases. The results in 2014 also benefited from a more favorable effective tax rate. Additional information is presented in the following discussion of the \"Worldwide Financial Services Operations\". The cost of sales to net sales ratio for 2015 was 78.1 percent, compared with 75.2 percent last year. The increase was due primarily to the impact of a less favorable product mix and the unfavorable effects of foreign currency exchange, partially offset by price realization and lower production costs. Additional information on 2015 results is presented on pages 21-23. EQUIPMENT OPERATIONS Agriculture and Turf The John Deere agriculture and turf segment manufactures and distributes a full line of agriculture and turf equipment and related service parts. Under the segment's global operating model, the segment consolidates all markets into four geographical customer focus areas to facilitate deep customer understanding and deliver better customer service. The segment's equipment operations are consolidated into five product platforms crop harvesting (combines, corn pickers, cotton and sugarcane harvesters and related front-end equipment and sugarcane loaders); turf and utility (utility vehicles, riding lawn equipment, walkbehind mowers, commercial mowing equipment, golf course equipment, implements for mowing, tilling, snow and debris handling, aerating and many other residential, commercial, golf and sports turf care applications and other outdoor power products); hay and forage (self-propelled forage harvesters and attachments, balers and mowers); crop care (tillage, seeding and application equipment, including sprayers, nutrient management and soil preparation machinery); and tractors (loaders and large, medium and utility tractors and related attachments). John Deere also purchases certain products from other manufacturers for resale. The segment also provides integrated agricultural business and equipment management systems. John Deere has developed a comprehensive agricultural management systems approach using advanced communications, data collection and global satellite positioning technologies to enable farmers to better control input costs and yields, improve soil conservation, minimize chemical use, and to gather information. John Deere's advanced telematics systems remotely connect agricultural equipment owners, business managers and dealers to agricultural equipment in the field, providing real-time alerts and information about equipment location, utilization, performance and maintenance to improve productivity and efficiency. In addition to the John Deere brand, the agriculture and turf segment purchases and sells a variety of equipment attachments under the Frontier, Kemper and Green Systems brand names, and manufactures and sells walk-behind mowers and scarifiers in select European countries under the SABO brand name. John Deere manufactures its agriculture and turf equipment for sale primarily through independent retail dealer networks, and also builds products for sale by mass retailers, including The Home Depot and Lowe's. 3 Sales of agricultural equipment are affected by total farm cash receipts, which reflect levels of farm commodity prices, acreage planted, crop yields and government policies, including the amount and timing of government payments. Sales are also influenced by general economic conditions, farm land prices, farmers' debt levels and access to financing, interest and exchange rates, agricultural trends, including the production of and demand for renewable fuels, labor availability and costs, energy costs, tax policies and other input costs associated with farming. Other important factors affecting new agricultural equipment sales are the value and level of used equipment, including tractors, harvesting equipment, self-propelled sprayers, hay and forage equipment and seeding equipment. Weather and climatic conditions can also affect buying decisions of agricultural equipment purchasers. Innovations in machinery and technology also influence agricultural equipment purchasing. For example, larger, more productive equipment is well accepted where farmers are striving for more efficiency in their operations. Large, cost-efficient, highly-mechanized agricultural operations account for an important share of worldwide farm output. The large-size agricultural equipment used on such farms has been particularly important to John Deere. A large proportion of the equipment operations' total agricultural equipment sales in the U.S. and Canada, and a significant proportion of sales in many countries outside the U.S. and Canada, comprises tractors over 100 horsepower, self-propelled combines, self-propelled cotton pickers, self-propelled forage harvesters, self-propelled sprayers and seeding equipment. However, John Deere's sales of small tractors below 100 horsepower are increasing, and John Deere offers a number of harvesting solutions to support development of the mechanized harvesting of grain, oilseeds, cotton, sugar and biomass. Retail sales of lawn and garden tractors, compact utility tractors, residential and commercial mowers, utility vehicles, and golf and turf equipment are influenced by weather conditions, consumer spending patterns and general economic conditions. Seasonality. Seasonal patterns in retail demand for agricultural equipment result in substantial variations in the volume and mix of products sold to retail customers during the year. Seasonal demand must be estimated in advance, and equipment must be manufactured in anticipation of such demand in order to achieve efficient utilization of manpower and facilities throughout the year. For certain equipment, John Deere offers early order discounts to retail customers. Production schedules are based, in part, on these early order programs. The segment incurs substantial seasonal variation in cash flows to finance production and inventory of agricultural equipment. The segment also incurs costs to finance sales to dealers in advance of seasonal demand. New combine and cotton harvesting equipment has been sold under early order programs with waivers of retail finance charges available to customers who take delivery of machines during off-season periods. In Australia, Canada and the U.S., there are typically several used equipment trade-in transactions as part of most new agricultural equipment sales. To provide support to its dealers for these used equipment trade-ins, John Deere provides dealers in these countries with a pool of funds, awarded to dealers as a percentage of the dealer cost for eligible new equipment sales. Dealers can use these funds to defray the costs of carrying or marketing used equipment inventory or to provide financing incentives to customers purchasing the used equipment. Retail demand for turf and utility equipment is normally higher in the second and third fiscal quarters. John Deere has pursued a strategy of building and shipping such equipment as close to retail demand as possible. Consequently, to increase asset turnover and reduce the average level of field inventories through the year, production and shipment schedules of these product lines are normally proportionately higher in the second and third fiscal quarters of each year, corresponding closely to the seasonal pattern of retail sales. Construction and Forestry John Deere's construction and forestry equipment includes a broad range of backhoe loaders, crawler dozers and loaders, four-wheel-drive loaders, excavators, motor graders, articulated dump trucks, landscape loaders, skid-steer loaders, log skidders, log feller bunchers, log loaders, log forwarders, log harvesters and a variety of attachments. John Deere provides a broad line of construction equipment and the most complete line of forestry machines and attachments available in the world. The construction and forestry machines are distributed under the John Deere brand name, and forestry attachments are distributed under the John Deere and Waratah brand names. In addition to the equipment manufactured by the construction and forestry segment, John Deere purchases certain products from other manufacturers for resale. The segment also provides comprehensive fleet management telematics solutions designed to improve customer productivity and efficiency through access to fleet location, utilization and maintenance information. The prevailing levels of residential, commercial and public construction and the condition of the forestry products industry influence retail sales of John Deere construction, earthmoving, material handling and forestry equipment. General economic conditions, the level of interest rates, the availability of credit and certain commodity prices such as those applicable to pulp, paper and saw logs also influence sales. 4 Pursuant to agreements between John Deere and Bell Equipment Limited (Bell), Bell licenses John Deere to manufacture articulated dump trucks in the U.S. for John Deere's distribution under the John Deere brand name in North, Central and South America. John Deere licenses Bell to manufacture and sell certain John Deere-designed construction equipment in specified territories of Africa. Bell is also the distributor of certain John Deere-manufactured construction equipment under the Bell brand and forestry equipment under the John Deere brand in certain territories of Africa. Bell and John Deere have agreed to terminate the articulated dump truck manufacturing and license agreements in the coming year. John Deere and Hitachi Construction Machinery Co. (Hitachi) have a joint venture for the manufacture of hydraulic excavators and tracked forestry equipment and loaders in the U.S. and Canada and a joint venture for the manufacture of excavators in Brazil. John Deere distributes Hitachi brands of construction and mining equipment in North, Central and South America. John Deere also has supply agreements with Hitachi under which a range of construction, earthmoving, material handling and forestry equipment manufactured by John Deere in the U.S., Finland and New Zealand is distributed by Hitachi in certain Asian markets. The division has also established manufacturing capacity for construction equipment in China and Brazil. The segment has a number of initiatives in the rent-to-rent, or short-term rental, market for construction, earthmoving and material handling equipment. These include specially designed rental programs for John Deere dealers and expanded cooperation with major, national equipment rental companies. John Deere also owns Nortrax, Inc. that in turn owns Nortrax Canada Inc. that in turn owns Nortrax Quebec Inc. (collectively called Nortrax). Nortrax is an authorized John Deere dealer for construction, earthmoving, material handling and forestry equipment in a variety of markets in the U.S. and Canada. John Deere also owns retail forestry sales operations in Australia, Brazil, Finland, Ireland, New Zealand, Norway, Sweden and the United Kingdom. Competition The equipment operations sell products and services into a variety of highly competitive global and regional markets. The principal competitive factors in all markets include product performance, innovation and quality, distribution, customer service and price. In North America and many other parts of the world, John Deere's brand recognition is a competitive factor. The competitive environment for the agriculture and turf segment includes some global competitors, including AGCO Corporation, CLAAS KGaA mbH, CNH Global N.V., Kubota Tractor Corporation and The Toro Company and many regional and local competitors. These competitors have varying numbers of product lines competing with the segment's products and each has varying degrees of regional focus. An important part of the competition within the agricultural equipment industry during the past decade has come from a variety of short-line and specialty manufacturers, as well as indigenous regional competitors, with differing manufacturing and marketing methods. Because of industry conditions, including the merger of certain large integrated competitors and the emergence and expanding global capability of many competitors, particularly in emerging and high potential markets such as Brazil, China and India where John Deere seeks to increase market share, the agricultural equipment business continues to undergo significant change and is becoming even more competitive. The segment's turf equipment is sold primarily in the highly competitive North American and Western European markets. The construction and forestry segment operates in highly competitive North American and global markets, including Brazil, China, India and Russia. Global competitors of the construction and forestry segment include Caterpillar Inc., Komatsu Ltd., Volvo Construction Equipment (part of Volvo Group AB), CNH Global N.V., Tigercat Industries Inc. and Ponsse Plc. The segment manufactures construction, earthmoving and material handling equipment for over 90 percent of the types of construction equipment used in the U.S. and Canada. Engineering and Research John Deere invests heavily in engineering and research to improve the quality and performance of its products, to develop new products and to comply with government regulations. Such expenditures were $1,425 million, or 5.5 percent of net sales, in 2015, $1,452 million, or 4.4 percent of net sales, in 2014 and $1,477 million, or 4.2 percent of net sales, in 2013. Manufacturing Manufacturing Plants. In the U.S. and Canada, the equipment operations own and operate 20 factory locations and lease and operate another two locations, which contain approximately 28.3 million square feet of floor space. Of these 22 factories, 13 are devoted primarily to agriculture and turf equipment, four to construction and forestry equipment, one to engines, two to engine and component remanufacturing and two to hydraulic and power train components. Outside the U.S. and Canada, the equipment operations own or lease and operate: agriculture and turf equipment factories in Brazil, China, France, Germany, India, Israel, Mexico, the Netherlands, Russia and Spain; construction equipment factories in Brazil and China; engine factories in Argentina, China, France, India and Mexico; and forestry equipment factories in Finland and New Zealand. These factories and manufacturing 5 operations outside the U.S. and Canada contain approximately 19.8 million square feet of floor space. The engine factories referred to above manufacture nonroad, heavy duty diesel engines, a majority of which are manufactured for John Deere's equipment operations. The remaining engines are sold to other regional and global original equipment manufacturers. The equipment operations also have financial interests in other manufacturing organizations, which include agricultural equipment manufacturers in the U.S., Bell in South Africa, the Hitachi joint venture that builds hydraulic excavators and track log loaders in the U.S. and Canada and the Hitachi joint venture that builds hydraulic excavators in Brazil, and ventures that manufacture transaxles and transmissions used in certain agriculture and turf segment products. John Deere's facilities are well maintained, in good operating condition and suitable for their present purposes. These facilities, together with both short-term and long-term planned capital expenditures, are expected to meet John Deere's manufacturing needs in the foreseeable future. Existing capacity is sufficient to satisfy John Deere's current expectations for retail market demand. The equipment operations' manufacturing strategy involves the implementation of appropriate levels of technology and automation to allow manufacturing processes to remain profitable at varying production levels. Operations are also designed to be flexible enough to accommodate the product design changes required to meet market conditions and changing customer requirements. Common manufacturing facilities and techniques are employed in the production of components for agriculture and turf equipment and construction and forestry equipment. In order to utilize manufacturing facilities and technology more effectively, the equipment operations pursue continuous improvements in manufacturing processes. These include steps to streamline manufacturing processes and enhance responsiveness to customers. John Deere has implemented flexible assembly lines that can accommodate a wider product mix and deliver products in line with dealer and customer demand. Additionally, considerable effort is being directed to manufacturing cost reduction through process improvement, product design, advanced manufacturing technology, enhanced environmental management systems, supply management and logistics as well as compensation incentives related to productivity and organizational structure. In past years, John Deere has experienced volatility in the price of many raw materials. John Deere has responded to cost pressures by implementing the cost-reduction measures described above and by increasing prices. Significant cost increases, if they occur, could have an adverse effect on the Company's operating results. The equipment operations also pursue external sales of selected parts and components that can be manufactured and supplied to third parties on a competitive basis. Capital Expenditures. The equipment operations' capital expenditures totaled $649 million in 2015, compared with $1,001 million in 2014 and $1,129 million in 2013. Provisions for depreciation applicable to these operations' property and equipment during these years were $687 million, $690 million and $630 million, respectively. Capital expenditures for the equipment operations in 2016 are currently estimated to be approximately $800 million. The 2016 expenditures will relate primarily to the modernization and restructuring of key manufacturing facilities, U.S. Tier 4 emission requirements and the development of new products. Future levels of capital expenditures will depend on business conditions. Patents and Trademarks John Deere owns a significant number of patents, trade secrets, licenses and trademarks related to John Deere products and services, and expects the number to grow as John Deere continues to pursue technological innovations. John Deere's policy is to further its competitive position by filing patent applications in the U.S. and internationally to protect technology and improvements considered important to the business. John Deere believes that, in the aggregate, the rights under these patents and licenses are generally important to its operations and competitive position, but does not regard any of its businesses as being dependent upon any single patent or group of patents. However, certain John Deere trademarks, which contribute to John Deere's identity and the recognition of its products and services, including but not limited to the \"John Deere\" mark, the leaping deer logo, the \"Nothing Runs Like a Deere\" slogan, the prefix \"JD\" associated with many products and green and yellow equipment colors, are an integral part of John Deere's business, and their loss could have a material adverse effect on the Company. Marketing In the U.S. and Canada, the equipment operations distribute equipment and service parts through the following facilities: two agriculture and turf equipment sales and administration offices located in Olathe, Kansas and Cary, North Carolina and one sales branch located in Grimsby, Ontario; and one construction, earthmoving, material handling and forestry equipment sales and administration office located in Moline, Illinois. In addition, the equipment operations operate a centralized parts distribution warehouse in coordination with eight regional parts depots and distribution centers in the U.S. and Canada. Through these U.S. and Canadian facilities, John Deere markets products to approximately 2,381 dealer locations, most of which are independently owned and operated. Of these, approximately 1,522 sell agricultural equipment, while approximately 427 sell 6 construction, earthmoving, material handling and/or forestry equipment. Nortrax owns some of the 427 dealer locations. Turf equipment is sold at most John Deere agricultural equipment locations, a few construction, earthmoving, material handling and forestry equipment locations and about 432 turf-only locations, many of which also sell dissimilar lines of non-John Deere products. In addition, certain lawn and garden product lines are sold through The Home Depot and Lowe's. Outside the U.S. and Canada, John Deere agriculture and turf equipment is sold to distributors and dealers for resale in over 100 countries. Sales and administrative offices are located in Argentina, Australia, Brazil, China, France, Germany, India, Italy, Mexico, the Netherlands, Poland, Russia, Singapore, South Africa, Spain, Sweden, Switzerland, Thailand, Turkey, Ukraine and the United Kingdom and an administrative office is located in Kenya. Associated companies doing business in China also sell agricultural equipment. Turf equipment sales outside the U.S. and Canada occur primarily in Europe and Australia. Construction, earthmoving, material handling and forestry equipment is sold to distributors and dealers primarily by sales offices located in Australia, Brazil, Finland, Ireland, New Zealand, Russia and Singapore. Some of these dealers are independently owned while John Deere owns others. The equipment operations operate centralized parts distribution warehouses in Brazil, Germany, India and Russia in coordination with regional parts depots and distribution centers in Argentina, Australia, China, Mexico, South Africa, Sweden and the United Kingdom. John Deere engines are marketed worldwide through select sales branches to large original equipment manufacturers and independently owned engine distributors. Raw Materials John Deere purchases raw materials and some manufactured components and replacement parts for its equipment, engines and other products from leading suppliers both domestically and internationally. These materials and components include a variety of steel products, steel and iron castings, forgings, plastics, electronics and ready-to-assemble components made to certain specifications. John Deere also purchases various goods and services used in production, logistics, offices and research and development processes. John Deere maintains strategic sourcing models to meet its production needs and build upon longterm supplier relationships. John Deere uses a variety of agreements with suppliers intended to drive innovation, ensure availability and delivery of industryleading quality raw materials and components, manage costs on a globally competitive basis, protect John Deere's intellectual property and minimize other supply-related risks. Supply chain risks monitored by John Deere to minimize the likelihood of the supply base causing business disruption include supplier financial viability, capacity, business continuity, quality and delivery and weather-related events including natural disasters. In fiscal year 2015, John Deere experienced no significant work stoppages as a result of shortages of raw materials or other commodities. Backlog Orders The dollar amount of backlog orders for the agriculture and turf segment believed to be firm was approximately $2.4 billion at October 31, 2015, compared with $3.9 billion at October 31, 2014. The agriculture and turf backlog is generally highest in the second and third quarters due to seasonal buying trends in these industries. John Deere generally produces and ships its construction and forestry equipment on average within approximately 60 days after an order is deemed to become firm. Therefore, no significant amount of construction and forestry backlog orders accumulates during any period. Trade Accounts and Notes Receivable Trade accounts and notes receivable arise primarily from sales of goods to independent dealers. Most trade receivables originated by the equipment operations are purchased by the financial services operations. The equipment operations compensate the financial services operations at approximate market rates of interest for these receivables. Additional information appears in Note 12 to the Consolidated Financial Statements. FINANCIAL SERVICES U.S. and Canada. The financial services segment primarily provides and administers financing for retail purchases from John Deere dealers of new equipment manufactured by John Deere's agriculture and turf and construction and forestry segments and used equipment taken in trade for this equipment. The Company and John Deere Construction & Forestry Company (a wholly-owned subsidiary of the Company) are referred to as the \"sales companies.\" John Deere Capital Corporation (Capital Corporation), a U.S. financial services subsidiary, generally purchases retail installment sales and loan contracts (retail notes) from the sales companies. These retail notes are acquired by the sales companies through John Deere retail dealers in the U.S. John Deere Financial Inc., a Canadian financial services subsidiary, purchases and finances retail notes acquired by John Deere Canada ULC, the Company's Canadian sales branch. The terms of retail notes and the basis on which the financial services operations acquire retail notes from the sales companies are governed by agreements with the sales companies. The financial services segment also finances and services revolving charge accounts, in most 7 cases acquired from and offered through merchants in the agriculture and turf and construction and forestry markets (revolving charge accounts). Additionally, the financial services operations provide wholesale financing for inventories of John Deere agriculture and turf equipment and construction and forestry equipment owned by dealers of those products (wholesale notes). The various financing options offered by the financial services operations are designed to enhance sales of John Deere products and generate financing income for the financial services operations. In the U.S., certain subsidiaries included in the financial services segment offer extended equipment warranties. Retail notes acquired by the sales companies are immediately sold to the financial services operations. The equipment operations are the financial services operations' major source of business, but many retail purchasers of John Deere products finance their purchases outside the John Deere organization through a variety of sources, including commercial banks and finance and leasing companies. The financial services operations offer retail leases to equipment users in the U.S. A small number of leases are executed with units of local government. Leases are usually written for periods of four months to sixty months, and typically contain an option permitting the customer to purchase the equipment at the end of the lease term. Retail leases are also offered in a generally similar manner to customers in Canada through John Deere Financial Inc. and John Deere Canada ULC. The financial services operations' terms for financing equipment retail sales (other than smaller items financed with unsecured revolving charge accounts) generally provide for retention of a security interest in the equipment financed. The financial services operations' guidelines for minimum down payments, which vary with the types of equipment and repayment provisions, are generally 10 percent to 30 percent. Finance charges are sometimes waived for specified periods or reduced on certain John Deere products sold or leased in advance of the season of use or in other sales promotions. The financial services operations generally receive compensation from the sales companies at approximate market interest rates for periods during which finance charges are waived or reduced on the retail notes or leases. The cost is accounted for as a deduction in arriving at net sales by the equipment operations. The Company has an agreement with Capital Corporation to make payments to Capital Corporation such that its ratio of earnings to fixed charges is not less than 1.05 to 1 for any fiscal quarter. For 2015 and 2014, Capital Corporation's ratios were 3.42 to 1 and 3.81 to 1, respectively, and never less than 3.26 to 1 and 3.32 to 1 for any fiscal quarter of 2015 and 2014, respectively. The Company has also committed to continue to own, directly or through one or more whollyowned subsidiaries, at least 51 percent of the voting shares of capital stock of Capital Corporation and to maintain Capital Corporation's consolidated tangible net worth at not less than $50 million. The Company's obligations to make payments to Capital Corporation under the agreement are independent of whether Capital Corporation is in default on its indebtedness, obligations or other liabilities. Further, the Company's obligations under the agreement are not measured by the amount of Capital Corporation's indebtedness, obligations or other liabilities. The Company's obligations to make payments under this agreement are expressly stated not to be a guaranty of any specific indebtedness, obligation or liability of Capital Corporation and are enforceable only by or in the name of Capital Corporation. No payments were required under this agreement in 2015 or 2014. Outside the U.S. and Canada. The financial services operations also offer financing, primarily for John Deere products, in Australia, Brazil, China, India, New Zealand, Russia, Thailand and in several other countries in Africa, Asia, Europe and Latin America. In certain areas, financing is offered through cooperation agreements or joint ventures. The manner in which the financial services operations offer financing in these countries is affected by a variety of country-specific laws, regulations and customs, including those governing property rights and debtor obligations, that are subject to change and that may introduce greater risk to the financial services operations. The financial services operations also offer to select customers and dealers credit enhanced international export financing for the purchase of John Deere products. Additional information on the financial services operations appears on pages 22, 23, 25 and 27. ENVIRONMENTAL MATTERS John Deere is subject to a wide variety of local, state and federal environmental laws and regulations in the U.S., as well as the environmental laws and regulations of other countries in which John Deere conducts business. John Deere strives to comply and believes it is in compliance in all material respects with applicable laws and regulations. However, failure to comply with these regulations could lead to fines and other penalties. John Deere is involved in the evaluation and clean-up of a limited number of sites but does not expect that these matters or other expenses or liabilities John Deere may incur in connection with any noncompliance with environmental laws or regulations or the cleanup of any additional properties, will have a material adverse effect on the consolidated financial position, results of operations, cash flows or competitive position of John Deere. With respect 8 to acquired properties and businesses or properties and businesses acquired in the future, John Deere conducts due diligence into potential exposure to environmental liabilities, but cannot be certain that it has identified or will identify all adverse environmental conditions. Compliance with these laws and regulations has added, and will continue to add, to the cost of John Deere's products. The U.S. Environmental Protection Agency has issued stringent emissions regulations for off-road engines, and governmental agencies throughout the world are similarly enacting more stringent laws to reduce off-road engine emissions. John Deere has achieved and plans to continue to achieve compliance with these regulations through significant investments in the development of new engine technologies and after-treatment systems. Compliance with emissions regulations has added and will continue to add to the cost of John Deere's products. EMPLOYEES At October 31, 2015, John Deere had approximately 57,200 full-time employees, including approximately 28,500 employees in the U.S. and Canada. John Deere also retains consultants, independent contractors, and temporary and part-time workers. Unions are certified as bargaining agents for approximately 82 percent of John Deere's U.S. production and maintenance employees. Approximately 10,000 of John Deere's U.S. production and maintenance workers are covered by a collective bargaining agreement with the United Auto Workers (UAW), with an expiration date of October 1, 2021. Unions also represent the majority of employees at John Deere manufacturing facilities outside the U.S. 9 EXECUTIVE OFFICERS OF THE REGISTRANT Following are the names and ages of the executive officers of the Company, their positions with the Company and summaries of their backgrounds and business experience. All executive officers are elected or appointed by the Board of Directors and hold office until the annual meeting of the Board of Directors following the annual meeting of stockholders in each year. Principal occupation during last five years other than office of the Company currently held Name, age and office (at December 1, 2015), and year elected to office Samuel R. Allen 62 Chairman and Chief Executive Officer 2010 2009 -2010 President and Chief Executive Officer James M. Field 52 President, Agriculture & Turf Division-Global Harvesting & Turf Platforms, Americas and Australia 2012 2009 -2012, Senior Vice President and Chief Financial Officer Jean H. Gilles 58 Senior Vice President, John Deere Power Systems, Worldwide Parts Services, Advanced Technology & Engineering and Global Supply Management and Logistics 2010 2009 -2010 Senior Vice President, John Deere Power Systems, John Deere Intelligent Solutions Group and Advanced Technology and Engineering Max A. Guinn 57 President, Worldwide Construction & Forestry, Global Labor Relations and Security 2014 2012 - 2014 Senior Vice President, Human Resources, Communications, Public Affairs and Labor Relations; 2009 - 2012 Senior Vice President Agriculture & Turf Division, Global Platform, Crop Harvesting Mary K.W. Jones 47 Senior Vice President and General Counsel 2013 2010 - 2013 Vice President Global Human Resources; 2009 - 2010 Director, Global Human Resources Deployment Rajesh Kalathur 47 Senior Vice President and Chief Financial Officer 2012 2012 Deputy Financial Officer; 2009 - 2012 Vice President, Sales & Marketing, China/India/South and East Asia/Sub-Saharan and South Africa, Agriculture & Turf Division Michael J. Mack, Jr. 59 Group President, John Deere Financial Services, Global Human Resources and Public Affairs 2014 2009 - 2014 President, Worldwide Construction & Forestry Division John C. May 46 President, Agricultural Solutions & Chief Information Officer 2012 2009 - 2012 Vice President, Agriculture & Turf Global Platform, Turf & Utility Markwart von Pentz 52 President, Agriculture & Turf Division-Europe, Asia, Africa, and Global Tractor Platform 2012 2009 - 2012 President, Agriculture & Turf DivisionEurope, CIS, Northern Africa, Middle East, Latin America, and Global Harvesting, Crop Care, Hay & Forage Products ITEM 1A. RISK FACTORS. The following risks are considered the most significant to John Deere's business based upon current knowledge, information and assumptions. This discussion of risk factors should be considered closely in conjunction with Management's Discussion and Analysis beginning on page 21, including the risks and uncertainties described in the Safe Harbor Statement on pages 23 through 24, and the Notes to Consolidated Financial Statements beginning on page 37. These risk factors and other forward-looking statements that relate to future events, expectations, trends and operating periods involve certain factors that are subject to change, and important risks and uncertainties that could cause actual results to differ materially. Some of these risks and uncertainties could affect particular lines of business, while others could affect all of the Company's businesses. Although each risk is discussed separately, many are interrelated. The Company, except as required by law, undertakes no obligation to update or revise this risk factors discussion, whether as a result of new developments or otherwise. The risks described in this Annual Report on Form 10-K and the \"Safe Harbor Statement\" in this report are not the only risks faced by the Company. 10 International, national and regional trade laws, regulations and policies (particularly those related to or restricting global trade) and government farm programs and policies could significantly impair John Deere's profitability and growth prospects. International, national and regional laws, regulations and policies directly or indirectly related to or restricting the import and export of John Deere's products, services and technology, including protectionist policies in particular jurisdictions or for the benefit of favored industries or sectors, could harm John Deere's multinational business and subject John Deere to civil and criminal sanctions. John Deere's profitability and growth prospects are tied directly to the global marketplace. Restricted access to global markets impairs John Deere's ability to export goods and services from its various manufacturing locations around the world, and limits the ability to access raw materials and high quality parts and components at competitive prices on a timely basis. Trade restrictions could limit John Deere's ability to capitalize on current and future growth opportunities in international markets and impair John Deere's ability to expand the business by offering new technologies, products and services. These restrictions may affect John Deere's competitive position. Furthermore, the ability to export agricultural and forestry commodities is critical to John Deere's agricultural and forestry customers. Policies impacting exchange rates and commodity prices or those limiting the export or import of commodities could have a material adverse effect on the international flow of agricultural and other commodities that may result in a corresponding negative effect on the demand for agricultural and forestry equipment in many areas of the world. John Deere's agricultural equipment sales could be especially harmed because farm income strongly influences sales of agricultural equipment around the world. Furthermore, trade restrictions could impede those in developing countries from achieving a higher standard of living, which could negatively impact John Deere's future growth opportunities arising from increasing global demand for food, fuel and infrastructure. Additionally, changes in government farm programs and policies, including direct payment and other subsidies, can significantly influence demand for agricultural equipment. Furthermore, embargoes and sanctions imposed by the US and other governments restricting or prohibiting sales or transactions to specific persons, including financial institutions, or countries or based on product classification expose John Deere to potential criminal and civil sanctions. Although John Deere has a compliance program in place designed to reduce the likelihood of potential violations of import and export laws and sanctions, these laws and sanctions, particularly with respect to eastern Europe, are changing rapidly. Violations of these laws could have an adverse effect on John Deere's reputation, business and results of operations and financial condition. Changes in government banking, monetary and fiscal policies could have a negative effect on John Deere. Policies of the U.S. and other governments regarding banking, monetary and fiscal policies intended to promote or maintain liquidity, stabilize financial markets and/or address local deficit or structural economic issues may not be effective and could have a material impact on John Deere's customers and markets. John Deere's operations and results could also be impacted by financial regulatory reform that could have an adverse effect on the financial services segment and on John Deere's customers by limiting their ability to enter into hedging transactions or to finance purchases of John Deere products. Government policies on taxes and spending can also affect John Deere, especially the construction and forestry segment due to the impact of government spending on infrastructure development. Changing worldwide demand for food and different forms of bio-energy could have an effect on the price of farm commodities and consequently the demand for certain John Deere equipment and could also result in higher research and development costs related to changing machine fuel requirements. Changing worldwide demand for farm outputs to meet the world's growing food and bio-energy demands, driven in part by government policies and a growing world population, are likely to result in fluctuating agricultural commodity prices, which directly affect sales of agricultural equipment. Lower farm commodity prices directly affect farm incomes, which could negatively affect sales of agricultural equipment. While higher commodity prices benefit John Deere's cropproducing agricultural equipment customers, higher commodity prices also could result in greater feed costs for livestock and poultry producers which in turn may result in lower levels of equipment purchased by these customers. Furthermore, changing bio-fuel demands may cause farmers to change the types or quantities of the crops they raise, with corresponding changes in equipment demands. Finally, changes in governmental policies regulating bio-fuel utilization could affect demand for John Deere's diesel-fueled equipment and result in higher research and development costs related to equipment fuel standards. As John Deere seeks to expand its business globally, growth opportunities may be impacted by greater political, economic and social uncertainty and the continuing and accelerating globalization of businesses could significantly change the dynamics of John Deere's competition, customer base and product offerings. John Deere's efforts to grow its businesses depend to a large extent upon access to and its success in developing market share and operating profitably in additional geographic markets including but not limited to Brazil, China, India and Russia. In some cases, these countries have greater political and economic volatility, greater vulnerability to infrastructure and labor disruptions and differing local customer product preferences and requirements than John Deere's other markets. Operating and seeking to expand business in a number of different regions and countries exposes John Deere to multiple and potentially conflicting cultural 11 practices, business practices and legal and regulatory requirements that are subject to change, including those related to tariffs and trade barriers, investments, property ownership rights, taxation, sanctions requirements and repatriation of earnings and advanced technologies. Expanding business operations globally also increases exposure to currency fluctuations which can materially affect the Company's financial results. As these emerging geographic markets become more important to John Deere, its competitors are also seeking to expand their production capacities and sales in these same markets. While John Deere maintains a positive corporate image and the John Deere brand is widely recognized and valued in its traditional markets, the brand is less well known in some emerging markets which could impede John Deere's efforts to successfully compete in these markets. Although John Deere is taking measures to adapt to these changing circumstances, John Deere's reputation and/or business results could be negatively affected should these efforts prove unsuccessful. John Deere operates in highly competitive markets. John Deere operates in a variety of highly competitive global and regional markets. John Deere competes worldwide with a number of other manufacturers and distributors that produce and sell similar products. John Deere competes on the basis of product performance, innovation and quality, distribution, customer service and price. Aggressive pricing or other strategies pursued by competitors, unanticipated product or manufacturing delays or John Deere's failure to price its products competitively could adversely affect John Deere's business, results of operations and financial condition. John Deere is subject to extensive anti-corruption laws and regulations. John Deere's global operations must comply with all applicable laws, which may include the U.S. Foreign Corrupt Practices Act (FCPA), the UK Bribery Act or other anti-corruption laws. These anti-corruption laws generally prohibit companies and their intermediaries from making improper payments or providing anything of value to improperly influence government officials or private individuals for the purpose of obtaining or retaining a business advantage regardless of whether those practices are legal or culturally expected in a particular jurisdiction. Recently, there has been a substantial increase in the global enforcement of anti-corruption laws. Although John Deere has a compliance program in place designed to reduce the likelihood of potential violations of such laws, violations of these laws could result in criminal or civil sanctions and have an adverse effect on John Deere's reputation, business and results of operations and financial condition. Negative economic conditions and outlook can materially weaken demand for John Deere's equipment and services, limit access to funding and result in higher funding costs. The demand for John Deere's products and services can be significantly reduced in an economic environment characterized by high unemployment, cautious consumer spending, lower corporate earnings, U.S. budget issues and lower business investment. Negative or uncertain economic conditions causing John Deere's customers to lack confidence in the general economic outlook can significantly reduce their likelihood of purchasing John Deere's equipment. Sustained negative economic conditions and outlook affect housing starts and other construction which dampens demand for certain construction equipment. John Deere's turf operations and its construction and forestry business are dependent on construction activity and general economic conditions. Decreases in construction activity and housing starts could have a material adverse effect on John Deere's results of operations. If negative economic conditions affect the overall farm economy, there could be a similar effect on John Deere's agricultural equipment sales. In addition, uncertain or negative outlook with respect to ongoing U.S. budget issues as well as general economic conditions and outlook can cause significant changes in market liquidity conditions. Such changes could impact access to funding and associated funding costs, which could reduce the Company's earnings and cash flows. Additionally, the Company's investment management activities could be adversely affected by changes in the equity and bond markets, which would negatively affect earnings. In addition, demand for John Deere's products and services can be significantly reduced by concerns regarding the diverse economic and political circumstances of the individual countries in the eurozone, the debt burden of certain eurozone countries and their ability to meet future financial obligations, and the long term stability of the euro as a single common currency. Persistent disparity with respect to the widely varying economic conditions within the individual countries in the eurozone, and its implications for the euro as well as market perceptions concerning these and related issues, could adversely affect the value of the Company's euro- denominated assets and obligations, have an adverse effect on demand for John Deere's products and services in the eurozone and have an adverse effect on financial markets in Europe and globally. More specifically, it could affect the ability of John Deere's customers, suppliers and lenders to finance their respective businesses, to access liquidity at acceptable financing costs, if at all, the availability of supplies and materials and on the demand for John Deere's products. 12 The Company's consolidated financial results are reported in U.S. dollars while certain assets and other reported items are denominated in the currencies of other countries, creating currency translation risk. John Deere operates in many areas of the world, involving transactions denominated in a variety of currencies. John Deere is subject to currency exchange risk to the extent that its costs are denominated in currencies other than those in which John Deere earns revenues. Additionally, the reporting currency for the Company's consolidated financial statements is the U.S. dollar. Certain of John Deere's assets, liabilities, expenses and revenues are denominated in other countries' currencies. Those assets, liabilities, expenses and revenues are translated into U.S. dollars at the applicable exchange rates to prepare the Company's consolidated financial statements. Therefore, increases or decreases in exchange rates between the U.S. dollar and those other currencies affect the value of those items as reflected in the Company's consolidated financial statements, even if their value remains unchanged in their original currency. Substantial fluctuations in the value of the U.S. dollar could have a significant impact on John Deere's results. Because the financial services segment provides financing for a significant portion of John Deere's sales worldwide, John Deere's operations and financial results could be impacted materially should negative economic conditions affect the financial industry. In recent years, negative economic conditions have frequently had an adverse effect on the financial industry in which the financial services segment operates. The financial services segment provides financing for a significant portion of John Deere's sales worldwide. The financial services segment is exposed to the risk that customers and others will default on contractual obligations. The financial services segment may experience credit losses that exceed its expectations and adversely affect its financial condition and results of operations. The financial services segment's inability to access funds at cost-effective rates to support its financing activities could have a material adverse effect on John Deere's business. The financial services segment's liquidity and ongoing profitability depend largely on timely access to capital in order to meet future cash flow requirements and to fund operations and costs associated with engaging in diversified funding activities. Additionally, negative market conditions could reduce customer confidence levels, resulting in declines in credit applications and increases in delinquencies and default rates, which could materially impact the financial services segment's write-offs and provision for credit losses. The Dodd-Frank Wall Street Reform and Consumer Protection Act (Act) and the regulations implementing the Act impose additional supervisory, financial and reporting requirements and compliance costs on John Deere and John Deere's financial services operations and could therefore adversely affect John Deere and its financial services segment. The Act was enacted on July 21, 2010 to broadly reform practices in the financial services industry, including equipment financing and securitizations. The Act directs federal agencies, including the Consumer Financial Protection Bureau, the Board of Governors of the Federal Reserve System, the Commodity Futures Trading Commission, the Federal Deposit Insurance Corporation and others, to adopt rules to regulate depository institutions, non-bank financial institutions, thrift holding companies, the consumer finance industry and the capital markets, including certain commercial transactions such as derivatives contracts. Although the effects of the Act on the capital markets and the financial industry are not fully known until all the regulations have been finalized and implemented, the Act and its regulations impose additional reporting requirements, stress testing requirements, leverage, liquidity requirements, capital and other supervisory an