Building a kayak using the composite method is a very laborIntensive process. In the Fabrication Department, the kayaks go through several steps as employees carefully place layers of Kevlar" in a mold and then use resin to fuse together the layers. The excess resinis removed with a vacuum process, and the upper shell and lower shell are removed from the molds and assembled. The seat, hatch, and other components are added in the Finishing Department At the beginning of April. Current Designs had 32 kayaks in process in the Fabrication Department Rick Thrune, the production manager, estimated that about 80% of the materials costs had been added to these boats, which were about 50% complete with respect to the conversion costs. The cost of this Inventory had been calculated to be $8,570 in materials and $9,510 in conversion costs Durine April, 68 boats were started into production. At the end of the month, the 30 kayaks in the ending Inventory were 20% complete as to materials and 40% complete as to conversion costs. A review of the accounting records for April showed that materials with a cost of $18,030 had been requisitioned by the Fabrication Department and that the conversion costs for the month were $40,510. Complete a production cost report for April 2022 for the Fabrication Department using the weighted average method. Direct materials and conversion costs are incurred uniformly throughout the process. CURRENT DESIGNS Fabrication Department Production Cost Report Quantities Equivalent Units Conversion Costs Physical Units Materials Units to be accounted for Work in process. April 1 Started into production Total units Units accounted for Completed and transferred out Work in process, April 30 Total units Costs Materials Conversion Costs Unit costs Total cost Equivalent units I Unit costs s Cost Reconciliation Schedule Costs to be accounted for Work in process. Aoril 1 Started into production Total costs $ Costcounted for Completed and transferred out Costs accounted for Completed and transferred out Work in process, April 30 Materials Conversion costs Total costs $