CASE STUDY PEFORMING ROR ANALYSIS FOR 3D PRINTER AND IIOT TECHNOLOGY Background Software used in 3D...
Fantastic news! We've Found the answer you've been seeking!
Question:
Transcribed Image Text:
CASE STUDY PEFORMING ROR ANALYSIS FOR 3D PRINTER AND IIOT TECHNOLOGY Background Software used in 3D printer systems manufactured by Spectrum LASER Corp. is currently able to automatically develop hollows, shells, and "tree supports" to save development time. Network printing for use on multiple machines and at different locations globally is available. New software, called JIT II, is being beta tested that will allow lloT-type (Industrial Internet of Things) connections between machines at distant locations. When onboard monitoring sensors detect that a part is about to fail, or it is time to replace one of several high-profile parts, the JIT II software will automatically queue the part's manufacturing code onto a 3D printer that is detected to be locally idle or ready. The company believes it can design and produce the JIT II software, the 3D printers, and the accompanying computer equipment necessary to place this technology in a wide variety of harsh environments-chemically toxic to humans, in flight, underground in mines, on the ocean floor, in war-torn areas, etc. Information For this case, we will analyze the available computers that can provide the server function necessary to make this interlinking available. and successful. The first cost and other parameter estimates, including expected contribution to annual net cash flow, are summarized below. First cost, $ Server 1 Server 2 50,000 100,000 Net cash flow, $/year 35,000 28,000 Life, years 4 4 Server 3 100000 50,000 year 1, plus 5000 per year for years 2, 3, and 4 (gradient) 70,000 maximum for years 5 on, even if the server is replaced 5 CASE STUDY PEFORMING ROR ANALYSIS FOR 3D PRINTER AND IIOT TECHNOLOGY Background Software used in 3D printer systems manufactured by Spectrum LASER Corp. is currently able to automatically develop hollows, shells, and "tree supports" to save development time. Network printing for use on multiple machines and at different locations globally is available. New software, called JIT II, is being beta tested that will allow lloT-type (Industrial Internet of Things) connections between machines at distant locations. When onboard monitoring sensors detect that a part is about to fail, or it is time to replace one of several high-profile parts, the JIT II software will automatically queue the part's manufacturing code onto a 3D printer that is detected to be locally idle or ready. The company believes it can design and produce the JIT II software, the 3D printers, and the accompanying computer equipment necessary to place this technology in a wide variety of harsh environments-chemically toxic to humans, in flight, underground in mines, on the ocean floor, in war-torn areas, etc. Information For this case, we will analyze the available computers that can provide the server function necessary to make this interlinking available. and successful. The first cost and other parameter estimates, including expected contribution to annual net cash flow, are summarized below. First cost, $ Server 1 Server 2 50,000 100,000 Net cash flow, $/year 35,000 28,000 Life, years 4 4 Server 3 100000 50,000 year 1, plus 5000 per year for years 2, 3, and 4 (gradient) 70,000 maximum for years 5 on, even if the server is replaced 5
Expert Answer:
Posted Date:
Students also viewed these accounting questions
-
Can internal financing lower the cost of capital?
-
1. Critique the performance of JCSS management in the purchase of this system. 2. The implementation problems illustrated in this case may occur when you obtain a system by having your IS department...
-
Calla Company produces skateboards that sell for $57 per unit. The company currently has the capacity to produce 90,000 skateboards per year, but is selling 80,500 skateboards per year. Annual costs...
-
In a cross-sectional study, a researcher studies career trajectories in NURSs over the past twenty years. There are five correlational research hypotheses. Why are mixed results, related to...
-
When the displacement of a machine is given by \(x(t)=18 \cos 8 t\), where \(x\) is measured in millimeters and \(t\) in seconds, find (a) the period of the machine in s, and (b) the frequency of...
-
The displacement of a machine is expressed as \(x(t)=0.05 \sin (6 t+\phi)\), where \(x\) is in meters and \(t\) is in seconds. If the displacement of the machine at \(t=0\) is known to be \(0.04...
-
A helical spring of stiffness \(k\) is cut into two halves and a mass \(m\) is connected to the two halves as shown in Fig. 2.81(a). The natural time period of this system is found to be \(0.5...
-
An electromagnet of mass \(1500 \mathrm{~kg}\) is at rest while holding an automobile of mass \(900 \mathrm{~kg}\) in a junkyard. The electric current is turned off, and the automobile is dropped....
-
Explain why it is difficult to estimate precisely the partial effect of \(X_{1}\), holding \(X_{2}\) constant, if \(X_{1}\) and \(X_{2}\) are highly correlated.
-
A pair of helical gears consist of a 20 teeth pinion meshing with a 100 teeth gear. The pinion rotates at 720 r.p.m. The normal pressure angle is 20 while the helix angle is 25. The face width is 40...
-
The Hack craft Division of Nunez Company reported the following data for the current year. Top management is unhappy with the investment center's return on investment (ROI). It asks the manager of...
-
Tick Company estimates that 360,000 direct labor hours will be worked during the coming year, 2002, in the Packaging Department. On this basis, the following budgeted manufacturing overhead cost data...
-
Whalen Company manufactures tablecloths. Sales have grown rapidly over the past 2 years. As a result, the president has installed a budgetary control system for 2002. The following data were used in...
Study smarter with the SolutionInn App