There are two large reservoirs, labeled as A and E, in a system. Reservoir A and reservoir E are connected to each other by a pipe that is 2000 meters long. The diameter of the pipe remains constant throughout its length and is 20 centimeters. Water is flowing through the system. Within the system, there is a pump located at a distance of 1000 meters, marked as L. The system has two important lines: the energy grade line and the hydraulic grade line. These lines represent different properties of the system. The figure accompanying the given information illustrates the positions of the energy grade line and the hydraulic grade line in the system. The head loss in the system is directly proportional to the length of the pipe. - Calculate the horizontal and vertical forces at point B due to the left part of point B. Can you show the control volume and related control surfaces you choose.Do not consider the reaction forces coming from the right side of point B. However, you should include the pressure and other initial forces from the right side. Be careful about the selection of the control volume. 28.0 m 27.90 m 8.0 m 3||| E.G.L. H.G.L. BP ZA 10.0 m +0.00 1000 m 500 m D 500 m ZE=25.90 m +0.00