CIST 2451-Cisco 1 July 24 Capstone Project-version 3 Lost DAY Objectives Explain how a small network of directly connected segments is created, configured and verified. Background/Scenario Design and build a network from scratch. You may consult with another individual, but each person must turn in an assignment. --Your design must include one router (model 2911), 3 switches (model 2960), and at least 6 end devices. --Fully configure the network using both IPv4 and IPv6 subnetting. --Verify the network configuration using at least five different show commands on different devices. (Attach snip-its to this assignment document to demonstrate.) --Secure the network using SSH, secure passwords, and console passwords. Required Resources -Packet Tracer eniva You work for a small company that wants to separate the Sales, IT and Engineering departments into different networks. Your supervisor has tasked you with designing a network and private addressing scheme to support both IPv4 and IPv6. The IT department needs at least 55 devices, the Sales department at least 200, and the Engineering department needs addresses for 95 devices. Configure addressing to reflect this need and conserve addresses. (Use VLSM for the IPv4 networks). Subnet the following. 10.85.48.0/20 2001:db8:acad:abe:/64 IPv4 Requirements 1st available address assigned to the router interfaces Last available address assigned to the switches' SVI. PC addresses are assigned in that network. IPv6 Requirements 1st available address assigned to the router interfaces Second IPv6 addresses are assigned to the switch SVIS. Router's link-local address is FE80::D Switches' link-local address is fe80::BA PC addresses are assigned in their respective networks.