CPS310 -COMPUTER ORGANIZATION II LAB 1 ALU, REGISTER DESIGN Submission instruction: students work in groups of 2, are expected to do the lab together and present the completed work to the TA by the end of the lab (group members are not required to do the lab separately). Students have two weeks to complete this lab. Please note that Lab 1 is for practice only and will be graded based on attendance and participation but not on design. 1. Design a 4-bit ALU that performs Arithmetic (add, subtraction), and Logic operations (AND, OR). The following control signals are to be considered: A/S: add/subtract (0:add, 1:subtract) A/O: and/or (0:and, 1:or) A/L: arithmetic/Logic (0:arithmetic, 1:logic) R/W: read/write signal (0:read, 1:write) 2. Simulate your design. Unit 1- Design a 4-bit adder/subtractor that accepts two 4-bits numbers, A and B, and either add them up (A + B) or subtract them (A- B) depending on a control signal A/S (when the control signal is 0 perform ADD, otherwise if the signal is 1 then perform SUB). The result will be stored in C. Unit 2 - Design a 4-bit AND/OR unit that accepts two 4-bits numbers, A and B, and either AND them or OR them depending on a control signal A/O (when the control signal is 0 perform AND, otherwise if the signal is 1 then perform OR - bitwise logical operation). The result will be stored in C