e T Use the following information in the next four 6. Capacitance is a measure of questions: A. How much charge a device can store at a 3V rh 2&_''@_' When the switch is placed in position 2 above, the bulb glows. This indicates the capacitor is A. charged B. discharged C. in the process of charging D. in the process of discharging With the switch in position 2 above and the build not glowing (ie, current not flowing) indicates that the capacitor is A. charged B. discharged C. in the process of charging D. in the process of discharging When the switch 1s placed in position 1, the bulb glows. This indicates the capacitor is A. charged B. discharged C. in the process of charging D. in the process of discharging With the switch in position 1 and the build not glowing indicates that the capacitor is A. charged B. discharged C. in the process of charging D. in the process of discharging Which is larger. the RC time constant T or the time it takes an RC circuit to discharge to half its initial yoltage (112)? A. Time constant T o B. Timeto discharge to %2 initial voltage C. Same =B D. Depends on the initial voltage 111 particular voltage. B. How much current a device can provide at a particular voltage. C. How much voltage a device can provide at a particular current. D. None of the above. A simple RC circuit contains a resistor of 200 kQ and a capacitor of 0.1 pF. What is the RC time constant of this circuit? A. 20 ps B. 20 ms Ca20iS D. 2000s A second identical resistor is added in parallel with the resistor in the previous problem. This causes the circuit to charge and discharge at a rate that is A. faster B. slower C. thesame D. dependent on other factors An RC circuit is found to have a half life of 4s. How long would it take to discharge to 1/8 of its original voltage? 8s 12 s 16 s 20 s 32s mo QW