Fa0 Fa0/24 PC-PT PC-A AAA Server Configuration 192.168.2.0/24 Fa0 Server-PT TACACS+ Server Fa0/23 Fa0/24 296024TT nc.PT Fa0 B R1 Fa0/0 192.168.1.1 255.255.255.0 S0/0/0 10.1.1.2 255.255.255.252 R2 S0/0/0 10.1.1.1 255.255.255.252 Fa0/0 192.168.2.1 255.255.255.0 S0/1/0 10.2.2.1 255.255.255.252 R3 S0/1/0 10.2.2.2 255.255.255.252 Fa0/0 192.168.3.1 255.255.255.0 TACACS+ Server NIC 192.168.2.2 255.255.255.0 Password tacacspa55 RADIUS Server NIC 192.168.3.2 255.255.255.0 Password radiuspa55 PC-A NIC 192.168.1.3 255.255.255.0 PC-B NIC 192.168.2.3 255.255.255.0 PC-C NIC 192.168.3.3 255.255.255.0 R2 & R3 Username Admin Password adminpa55 R1 Username Admin1 Password admin1pa55 TACACS+ Username Admin2 Password admin2pa55 RADIUS Username Admin3 Password admin3pa55 Enable Password must be your last 4 digits of Student ID Fa0/0 Laptop-PT Laptop1 10.1.1.0/30 Se0/1/0 0/0 10.2.2.0/30 Fa0/0 Se0/0/0 Fa0/1 1801 R1 Se0/1/0 Fa0/0 1841 Fa0/1 R3 2960-24TT S1 192.168.1.0/24 Laptop-PT Laptop0 Laptop-PT Laptop2 Lab Steps: Server-PT RADIUS Server Fa0 Fa0/23 296 Fa0/24 53 192.168.3.0/24 Fa0 PC-PT PC-C Using Cisco Packet Tracer create the above topology with all basic IP & Routing configuration using RIP version 2 as Routing Protocol than Configure a local user account on R1 and authenticate on the console and VTY lines using local AAA. Verify local AAA authentication from the R1 console and the PC-A client. Configure a server-based AAA authentication using TACACS+. Verify server-based AAA authentication from PC-B client. Configure a server-based AAA authentication using RADIUS. Verify server-based AAA authentication from PC-C client.