Glassworks Inc produces two types of glass shelving, rounded edge and squared edge on the same production line. For the current period, the company reports the following data, Direct materials Direct labor Overhead (50% of direct labor cost) Total cost Quantity produced Average cost periit. crounded) Rounded Edge 59,300 6.200 10.ee 534,100 18.700 Ft 5 3.10 Shared Edge 521,600 12.000 30,000 569,600 14,200 Ft 5 4.10 Total 530.900 18,200 51,6 $13,200 Glassworks's controller wishes to apply activity based costing (ABC) to allocate the $54600 of overhead costs incurred by the two product lines to see whether cost per foot would change markedly from that reported above, She has collected the folowing information Overhead Cost Category (Activity Cost Pool) Supervision Depreciation of machine Assembly line preparation Total overhead Cost $ 2,154 29,100 514,000 She has also collected the following information about the cost drivers for each category (cost pool and the amount of each driver used by the two product lines. (Round activity rate and cost per unit answers to 2 decimal places.) Overhead Cost Category CActivity Cost Pool) Supervision Depreciation of machinery Assembly line preparation Driver Direct labor cost (5) Machine hours Setups (number) Rounded Edge 56,200 400 hours 30 times Usage Squared Edge $12,000 800 hours 93 times Total $18,200 1,200 hours 123 times Activity Rate a Required: 1. Assign these three overhead cost pools to each of the two products using ABC Activity Overhead Cost Activity Drivers Supervision Direct labor cost Depreciation of machinery Machine hours Assembly line preparation Setups Rounded edge Activity rate Supervision SO Depreciation of machinery 0 Assembly line preparation D Activity driver incurred Overhead assigned Activity rate Activity driver incurred Overhead assigned Squared edge Components Supervision Depreciation of machinery Assembly line preparation 0 0 0 2. Determine average cost per foot for each of the two products using ABC Rounded edge Squared edge