Help please

Q2) Given four 1-bit inputs: A,B,C,D, and another two 1-bit inputs: S1 and S0 for select lines, design a 4X1 Multiplexer with 1-bit output Y. Your design should be implemented with only 3- input AND gates and a 4-input OR gate. [50 Points] a) Write the Truth Table and Boolean equations for the 4X1 MUX using inputs mentioned. [10] Implement a 4x1 MUX you designed using the Quartus software. Name your file "MUX_4 1". Compile the block diagram file and create a symbol by doing the following: File Create/UpdateCreate Symbol Files for Current File Illustrate your design on paper of the following Boolean expression using a 4X1 Multiplexer. F(p, q, r) = m(0,1,4,7) In Quartus, create a new project called TOP, start a new block diagram file, get the 4X1 MUX you designed in part (b) and include the inputs p.q.r and implement the circuit you designed in step (c), you can save the file as TOP.bdf. b) [15] c) [10] d) [10] e) Compile the file (If compilation doesn't work, go to Project->Add/Remove Files in Project, and make sure that your MUX_4_1.bdf file and your MUX_4 1.bsf file are included). Once compilation is successful, create a simulation file to show correct operation of circuitry. Run all possible inputs for p.g,r and illustrate the output bit, F, at those values. Your results should be attached right after this question in the order asked ab starting with the truth table and Boolean equations, block diagram of MUX 4 1.bdf, solution by hand of part (c), block diagram of TOP.bdf, TOP.wvf. ove