IP International Branch VOIP Cloud S P Phone P Plane Home VolPO Analog Phoned International NTP Tolopho y WAN Access Point Brancht dore Switch Laptopo Branch 1 NTP IP IP Phonea IP Phone5 StartCo NTP Branch 2 Branch 2 NTP PCO IP Phone2 IP Phone1 Ip phones PCI Addressing Table Device Interface IP Subnet Default VLAN Address Mask Gateway Association StartCo Router F0/0.220 10.220.0.1 255.255.255.0 N/A VLAN 220 F0/0.221 10.221.0.1 255.255.255.0 N/A VLAN 221 F0/0.225 10.225.0.1 255.255.255.0 N/A VLAN 225 F0/1 1.1.1.2 255.0.0.0 N/A N/A Branch 2 Router F0/0.30 10.30.0.1 255.255.255.0 | N/A VLAN 30 FO/0.40 10.40.0.1 255.255.255.0 | N/A VLAN 40 FO/1 1.1.1.3 255.0.0.0 N/A International Router F0/0.50 10.50.0.1 255.255.255.0 N/A VLAN 50 FO/0.60 10.60.0.1 255.255.255.0 N/A VLAN 60 FO/1 1.1.1.4 255.0.0.0 N/A Branch 1 VLAN 1 1.1.1.10 255.0.0.0 N/A VLAN 1 Layer 3 Switch VLAN 10 10.10.0.1 255.255.255.0 N/A VLAN 10 VLAN 20 10.20.0.1 255.255.255.0 N/A VLAN 20StartCo Switch VLAN 221 10.221.0.2 255.255.255.0 10.221.0.1 VLAN 221 Branch 2 Switches DATA VLAN| DHCP or static 255.255.255.0 NIA DATA VLAN StartCo Syslog and NTP | NIC 10.221.0.10 255.255.255.0 10.221.0.1 VLAN 221 Server Branch2 Syslog and NTP NIC 10.40.0.10 255.255.255.0 10.40.0.1 VLAN 40 Server International Syslog and | NIC 10.60.0.10 255.255.255.0 10.60.0.1 VLAN 60 NTP Server Phones DHCP N/A N/A Voice VLANS PCs NIC DHCP N/A N/A Data VLANS VolP Cloud Server NIC 1.1.1.1 255.255.255.0 Scenario StartCo, a business with 25 employees and four locations, had another technician install a small business Cisco CUCME phone system, but it doesn't completely work. You have been brought in to fix the system and get the first seven phones working. The Branch 1 Location is is using a hosted VolP server. Requirements You are responsible for configuring (if necessary) and troubleshooting ALL routers, and Switches, computers and IP phones The requirements for the system are CME at Each location Each location will need dialing peers to be configured to allow phone calls between the locations. DHCP will need to be configured to assign IP addresses dynamically. OSPF routes are used between the StartCo and Branch routers. PoE Switches are used to power phones where available. Branch 1 will be using a VolP Hosted provider and Layer 3 Switch to route traffic Syslog and NTP services will need to be configured on all CME routers and switches. Typically, it is best to use a syslog server in a LAN environment as not send logging traffic across a WAN.StartCo Switch VLAN 221 10.221.0.2 255.255.255.0 10.221.0.1 VLAN 221 Branch 2 Switches DATA VLAN| DHCP or static 255.255.255.0 NIA DATA VLAN StartCo Syslog and NTP | NIC 10.221.0.10 255.255.255.0 10.221.0.1 VLAN 221 Server Branch2 Syslog and NTP NIC 10.40.0.10 255.255.255.0 10.40.0.1 VLAN 40 Server International Syslog and | NIC 10.60.0.10 255.255.255.0 10.60.0.1 VLAN 60 NTP Server Phones DHCP N/A N/A Voice VLANS PCs NIC DHCP N/A N/A Data VLANS VolP Cloud Server NIC 1.1.1.1 255.255.255.0 Scenario StartCo, a business with 25 employees and four locations, had another technician install a small business Cisco CUCME phone system, but it doesn't completely work. You have been brought in to fix the system and get the first seven phones working. The Branch 1 Location is is using a hosted VolP server. Requirements You are responsible for configuring (if necessary) and troubleshooting ALL routers, and Switches, computers and IP phones The requirements for the system are CME at Each location Each location will need dialing peers to be configured to allow phone calls between the locations. DHCP will need to be configured to assign IP addresses dynamically. OSPF routes are used between the StartCo and Branch routers. PoE Switches are used to power phones where available. Branch 1 will be using a VolP Hosted provider and Layer 3 Switch to route traffic Syslog and NTP services will need to be configured on all CME routers and switches. Typically, it is best to use a syslog server in a LAN environment as not send logging traffic across a WAN.Branch2 Location: 10.30.0.0 /24 for the voice VLAN 30. 10.40.0.0 /24 for the data VLAN 40. The first ten addresses for each VLAN should be reserved for static devices. The sixth (Branch 2 location) phone should have number 3000 assigned Syslog and NTP Server is located on the data VLAN. International Branch Location: 10.50.0.0 /24 for the voice VLAN 50. 10.60.0.0 /24 for the data VLAN 60. The first ten addresses for each VLAN should be reserved for static devices. The IP phone should have number 5000 assigned The analog phone should have number 5001 assigned Syslog and NTP Server is located on the data VLAN. OSPF Routing documentation: OSPF Routing is already configured correctly on each router and the Layer 3 switches. router ospf 1 network 1.0.0.0 0. 255.255.255 area 0Verify the following items: Routers and Switches have correct IP addresses per the documentation (5 Points) PC's have IP addresses via DHCP and they are on the correct VLANs (5 Points) Servers have the correct IP addresses per the documentation (5 Points) Phones connected to POE switches are powered via PoE and not via power bricks (5 Points) Phones have IP addresses via DHCP and they are on the correct Voice VLANs (10 Points) Syslog servers are working with all routers (5 Points) Syslog servers are working with all switches (5 Points) NTP is working on the routers (5 Points) NTP is working on the switches (5 Points) Dial Peers (25 Points) All phones can successfully call every other phone (25 Points) Bonus - PC Softphones are configured and can successfully call every other phone (5 Points)