Kenworth Company uses a job-order costing system. Only three jobs---Job 105, Job 106, and Job 107--were worked on during November and December. Job 105 was completed on December 10: the other two jobs were still in production on December 31, the end of the company's operating year. Data from the job cost sheets of the three jobs follow. Job Cost Sheet Job 105 Job 106 Job 107 November costs incurred: Direct materials Direct labour Manufacturing overhead December costs incurred: Direct materials Direct labour Manufacturing overhead $19,900 $12,700 $ $16.400 $10,400 $ $24.ee $15,600 $ e @ 8 $ e$ 9,900 $ 28.100 $ 6,550 $ 7,700 13,480 2 The following additional Information is available: a Manufacturing overhead is applied to jobs on the basis of direct labour cost. b. Balances in the inventory accounts at November 30 were as follows: 5.50.200 Raw Materials Work In Process Tinted Goods $182.ee Required: 1. Prepare T-accounts for Raw Materials. Work In Process, Finished Goods, and Manufacturing Overhead. Enter the November 30 Inventory balances given above. In the case of Work In Process, compute the November 30 balance and enter it into the Work in Process T-account Raw Materials Work in Process Beg Bal Beg Bal End Bal End Bal Finished Goods Manufacturing Overhead Beg Bai Beg Bal End Bal End. Bal Salaries & Wages Payable Accounts Payable Beg Bal Beg Bal End Bal End. Bal 0 2. Prepare journal entries for December as follows: a Prepare an entry to record the issue of materials Into production and post the entry to appropriate T-accounts. (In the case of direct materials, it is not necessary to make a separate entry for each Job.) Indirect materials used during December totalled $6,550. (If no entry is required for a transaction/event, select "No Journal entry required" In the first account field.) View transaction Journal entry worksheet