Mickley Corporation produces two products, Alpha6s and Zeta7s, which pass through two operations, Sintering and Finishing. Each of the products uses two raw materials-X442 and Y661. The company uses a standard cost system, with the following standards for each product (on a per unit basis): Raw Material Product Alpha6 X442 3.0 kilos Y661 2.0 liters 5.0 kilos 5.0 liters Standard Labor Time Sintering 0.40 hours 0.50 hours Finishing 1.00 hours 1.20 hours Zeta7 Information relating to materials purchased and materials used in production during May follows: Material X442 Y661 Purchases 15,700 kilos 16,700 Purchase Cost $ 51,810 liters $ 20,040 Standard Price $ 3.10 per kilo $ 1.30 per liter Used in Production 10,200 kilos 14,700 liters The following additional information is available: a. The company recognizes price variances when materials are purchased. b. The standard labor rate is $23.00 per hour in Sintering and $21.50 per hour in Finishing. c. During May, 1,450 direct labor-hours were worked in Sintering at a total labor cost of $35,090, and 3,020 direct labor-hours were worked in Finishing at a total labor cost of $70,970. d. Production during May was 2,300 Alpha6s and 700 Zeta7s. Required: 1. Complete the standard cost card for each product, showing the standard cost of direct materials and direct labor. 2. Compute the materials price and quantity variances for each material. 3. Compute the labor rate and efficiency variances for each operation.