Mickley Corporation produces two products, Alphabs and Zeta7s, which pass through two operations, Sintering and Finishing. Each of the products uses two raw materials-X442 and Y661. The company uses a standard cost system, with the following standards for each product (on a per unit basis): Raw Material Standard Labor Time Product X442 7661 Sintering Finishing Alpha 1.5 kilos 2.0 liters 0.20 hours 0.60 hours Zeta 7 3.5 kilos 4.0 liters 0.40 hours 0.90 hours Information relating to materials purchased and materials used in production during May follows: Purchase Uned in Material Purchases Cost Standard Price Production X442 14,300 kilos 5.57,200 $ 3.80 per kilo 8,800 kilos Y661 15,300 liters $ 24,480 $ 1.70 per liter 13,300 liters The following additional information is available: a. The company recognizes price variances when materials are purchased, b. The standard labor rate is $20.00 per hour in Sintering and $18.50 per hour in Finishing c. During May, 1,300 direct labor-hours were worked in Sintering at a total labor cost of $29,640, and 2,880 direct labor-hours were worked in Finishing at a total labor cost of $59,040, d. Production during May was 1800 Alpha6s and 1.800 Zeta7s. Compute the materials price and quantity variances for each material. (Indicate the effect of each variance by selecting "" for favorable, "U" for unfavorable, and "None" for no effect (l.e., zero variance). Input all amounts as positive values.) Direct Materials Variances Material X442: Materials price variance Materials quantity variance Direct Materials Variances --Material Y661: Materials price variance Materials quantity variance Compute the labor rate and efficiency variances for each operation (Indicate the effect of each variance by selecting "F" for favorable, "U" for unfavorable, and "None" for no effect (ie, zero variance). Input all amounts as positive values.) Direct Labor Variances Sintering: Labor rate variance Labor efficiency variance Direct Labor Variances-Finishing: Laborrate variance Labor efficiency variance