Module 2: Project - Part 1

• DueSep 5by11:59pmPoints0AvailableAug 30 at 12am - Sep 5 at 11:59pm7 days

This assignment was locked on Sep 5 at 11:59 pm. Attached are the project directions (in green text at the end of this paragraph) that you need to read through. You will see some differences in the Project, if you read through it before, as we have provided some options to you. One, if you have some experience or feel adventuresome, you can download and install a Virtual Machine (VM) on your PC or Mac. Otherwise, we've provided an alternate assignment. Future parts to the project will allow you to, then, either use your own VM or can be accomplished from within your InfoSec lab environment.In any case, the Project is broken into 4 parts (deliverables).The project is submitted in a graded report in Week 8, complete with screenshots from these parts of the project. To stay on track, start Part 1 of the Project this week. Your choice, but don't put it off as it would be difficult to catch up and is a significant part of your final grade.

Updated Project (Spring 2021).docx

Download Updated Project (Spring 2021).docx

Updated Project (Spring 2021).docx

Download Updated Project (Spring 2021).docx

Project: Penetration Testing Report

(20 Points)

Scenario

You have been hired as a junior security consultant and have been tasked with performing an in-house penetration test to demonstrate your readiness to support the audit of a large corporate client that has employed your firm's services.Conducting a penetration test consists of 1) planning the test, 2) preparing your test tools, 3) performing the test, 4) analyzing the data, and 5) writing up and communicating your findings. The project will document your notional penetration test.

Project OVERVIEW

Your project will be submitted in four sections. The final deliverable will include all combined sections:

oPre-Test: Deployment of attack tools and victim host (Week 2)

oTesting (Mapping and Scanning): Mapping the target environment and conducting a vulnerability scan (Week 4)

oTesting (Exploitation): Gaining Access through a vulnerability identified during the vuln scan (Week 6)

oAnalysis and Reporting: Communicating findings and providing mitigation recommendation (Week 8)

Supporting Details

The purpose of this project is to evaluate the student's ability to:

oBuild and deploy an attack OS (Kali Linux or other similar operating system (OS))

oConfigure and deploy a victim host (Metasploitable, Broken Web Apps, Mutillidae, other exploitable OS or virtual machine (VM))

oConduct a vulnerability scan

oResearch a hardware or software vulnerability

oDiscuss how the vulnerability can be exploited

oExploit the vulnerability

oEvaluate the risk posed by this vulnerability

oProvide a recommended compensating control to mitigate the vulnerability

Students may choose to submit the project using one of two options - each option has pros and cons that students should evaluate before making their decision.

A)Local Lab: Requires access to a dedicated computer in which students have sufficient:

oaccess (continued access to the same machine for the duration of the course)

opermissions (administrative permissions to install software)

ostorage (minimum of 30 GB available to the student for VM storage)

omemory (minimum of 8 GBs)

obandwidth (downloading large VMs can take considerable time even with high-speed Internet connections)

B)Remote Lab: Utilizes the online lab environment used to complete the weekly course labs

Part 1 - Pre-Test: Deployment of attack tools and victim host (Week 2)

PROJECT SECTION 1 DETAILS: The first part of your project consists of preparing and deploying your testing tools (the attack OS) and the vulnerable host that will serve as your attack target.Instead of requiring the use of two physical machines, we will utilize one physical machine and we will leverage virtualization software to install a hypervisor (VirtualBox, VMware, etc.) along with two (2) "guest" operating systems.For those new to virtualization, we are simply using our "host OS" (Window, Mac, Linux) and installing a virtualization "software application" that then allows us to run multiple OS'es on our "host OS" very quickly and easily.Many options exist that provide virtualized solutions, e.g., cloud-based (Amazon Web Services, Microsoft Azure, DigitalOcean, and many, many others) or local instances on our machines.Some hypervisors run as the "host OS" ('bare metal' like VMware ESXi - common in enterprise environments) or as hosted applications like VMware Fusion/Workstation, or Oracle VirtualBox. First you decide which "free" virtualization software you want to install (VMware or Oracle) - some may already have a preference, feel free to explore both options.If you are undecided, go with VMware.

As mentioned earlier, you have two options to choose from:

Option 1 - Local Lab

1.Virtualization Software.Choose your virtualization software (either works fine and they are both free):

oVirtualBox:

ohttps://www.virtualbox.org/wiki/Downloads

oVMware Workstation Player:

ohttps://www.vmware.com/products/workstation-player/workstation-player-evaluation.html

2.Attack OS/VM.Once your virtualization software is chosen, choose an attack OS to download.You will use Kali Linux in the lab environment and would likely be the most comfortable with that.However, you may download any "attack OS."Other options include: Parrot OS, BackBox, BlackArch (advanced only - save yourself the pain and skip this one), and many others.Note: It will be much easier to download a pre-built VM instead of the .iso image option.Additionally, the pre-built images are specific to the virtualization software that you are using so choose accordingly.

ohttps://www.offensive-security.com/kali-linux-vm-vmware-virtualbox-image-download/

3.Vulnerable Target OS/VM.You will need a victim machine to target and exploit.Download a virtual machine that you can attack.There are many options that are designed to help students practice their skills and learn to exploit vulnerabilities in an approved, educational manner.Keep in mind that these are inherently vulnerable and designed to be relatively easy to exploit.A recommended best practice is to not allow other machines outside of your "virtual network" to be able to communicate with them.There is a "NAT" network setting within your virtualization software that helps to isolate your "lab" systems from the other devices on your local area network.Many options exist, but here are a few:

oMetasploitable (also includes many of the ones below - the same as what is in the InfoSec labs).There are a few versions out there - go with "Metasploitable2" - it can be downloaded from: https://sourceforge.net/projects/metasploitable/files/Metasploitable2/ or https://information.rapid7.com/download-metasploitable-2017.html

oOWASP's Broken Web Apps (includes WebGoat): https://sourceforge.net/projects/owaspbwa/files/latest/download

oDVWA (Web Application): https://github.com/ethicalhack3r/DVWA/archive/master.zip.

oBad Store (Web Application): https://www.vulnhub.com/entry/badstore-123,41/

oVulnHub: Many options exist here - somewhat like a "capture the flag" with near limitless possibilities with new ones being added all of the time (Note: I would save these for after the class project - more for fun) https://www.vulnhub.com

4.If you need additional help installing Kali, please review Kali Linux Revealed for step-by-step instructions.There is also a course video during Week 2 that is very helpful

ohttps://kali.training/downloads/Kali-Linux-Revealed-1st-edition.pdf

Option 2 - Remote Lab

The previous option is definitely a lot of fun and helps develop a better understanding of the underlying architecture but, unfortunately, may not be a viable option for you depending on your circumstances.Option 2 can be done without having to install any software and consists of the student logging in to the InfoSec Learning labs to complete the project for the remainder of the project sections.In lieu of downloading , installing and configuring software, Option 2 Part 1, requires research into an online cloud hosting provider and the deployment of a virtual private server.This option also has some flexibility.

oOption 2A: Research and choose a cloud hosting provider and deploy a virtual private server that you can remotely access and configure.Install any "free" operating system on the cloud server.Typically, any Linux OS can be freely deployed without charge.Most, if not all, of the cloud hosting providers will require a credit card or PayPal account to verify identity and may charge a nominal fee ($1 or more).The submission requirement for this option is to take a screenshot of your newly created VPS with an open terminal window echoing (printing to screen) your name and date simply to show that you created it.

oOption 2B: Research three cloud hosting providers and compare and contrast their offerings in terms of a solution that you could use if you were to conduct your penetration testing from their cloud services.Consider costs for computing time, storage, access, security, etc.The research paper should be 1.5 - 2 pages in length with a minimum word count of 750 words.

Part 2 - TESTING (MAPPING AND SCANNING): Mapping the target environment and conducting a vulnerability scan (Week 4)

PROJECT SECTION 2 DETAILS: The second part of your project has two parts.You may choose either Project Lab Option ("Local Lab" or "Remote Lab") below to complete the following requirements:

oPart A: Identifying the target system through network discovery using at least two network discovery/mapping tools (e.g., Nmap, Netdiscover, Arp-scan, etc.) to identify networks and targets.Identify what ports, services, and versions of software are running in the network environment.

oPart B: Additionally, you will need to complete a vulnerability scan against your target host to identify vulnerabilities that you can then use to exploit to gain administrative/root access in the following project section

Option 1 - Local Lab

Choose any of the tools within your chosen Attack VM (Kali, Parrot OS, etc.) to map your network following the Part A requirements

Choose any vulnerability scanning software to download, install and configure (Open VAS, Nessus, etc.) complete Part B.You should be able to find free "personal/home use versions)."Configure a scan to run against your target host.If your target host is a deliberately vulnerable machine, you should find plenty of "critical/high" vulnerabilities to choose for your attack in the following project section.

Option 2 - Remote Lab

You may choose to complete this portion of the project using the Infosec Learning Lab "Remote and Local Exploitation."No software downloads are required, so just configure your tools and complete the scans.Follow the requirements in the Project Section 2 Details.

Part 3 - Exploitation: Gaining Access through A vulnerability identified during the vuln scan (Week 6)

PROJECT SECTION 3 DETAILS: The third part of your project requires you to exploit a vulnerability of your choosing based on the previous section's scanning.The exploit should be through a Metasploit Module or other open-source/commercial tool or custom script/code.Select your vulnerability carefully.You should thoroughly research your vulnerability before you start to exploit it - which is the same process you would use in a professional capacity.The vulnerability MUST RESULT IN GAINING SYSTEM/ROOT ACCESS on the target host.Compromised credentials (including no password or weak password) is not a sufficient vulnerability to exploit.

During the course labs, you will have completed labs that require you to exploit a vulnerability.You must choose an exploit that we have not done in class.I suggest doing a web search on "Metasploitable Walkthrough" for additional ideas on Metasploit modules that could be used (if you have selected Metasploitable as your vulnerable target), or research vulnerabilities specific to your vulnerable framework. Keep in mind that your vulnerability should have been flagged during the vulnerability scanning portion.

Option 1 - Local Lab

Depending on your chosen vulnerable target host, you may have many more vulnerabilities to choose from.I recommend that you keep it simple and stick with a vulnerability that is well documented so there is sufficient write-ups and posts to follow.With that said, creativity and rigorous exploit research is always welcomed and appreciated.

Option 2 - Remote Lab

Your choices are surprisingly not limited here.There are, of course, vulnerabilities in some of the web applications that will not show up in a vulnerability scan with a tool like Nessus due to what Nessus is actually looking at.With that said, web application vulnerabilities are a bit more complex than some of the other software vulnerabilities that are well documented for Metasploitable.I recommend you stick with a well-documented vulnerability.

Part 4: Analysis and Reporting: Communicating findings and providing mitigation recommendation (Week 8)

PROJECT SECTION 4 DETAILS: The fourth part of your project requires you to provide a well written report documenting your results and reporting your findings and recommendations.The report should include the following:

oVulnerability Research: Research the vulnerability and discuss the specifics.What does the software do and why does the vulnerability exist?You must explain the technical aspects of the vulnerability to get full credit.Remember: This is the research portion.Learn about the vulnerability and discuss it in your own words - do not simply copy and paste.

oVulnerability Analysis: Describe the vulnerability in terms of complexity, access, privileges required, vulnerability scoring, etc.Reference the National Vulnerability Database (NVD) scoring.Explore the links associated with the vulnerability in the NVD.This typically provides a lot of high-level and low-level technical details.The difference between this section and the vulnerability research section is that this should be specific to the implementation of the software and the existing environment.For example, does the vulnerability exist across all instances of this software or is it specific to a configuration or installation stack?Each vulnerability should have a CVE and CVSS score that will help provide additional context.

oVulnerability Exploitation: Discuss the steps that were taken for the exploitation.Please provide the configuration of the script or the settings of the tool.To receive full credit for the exploitation, you need to show system-level access, root-level access, or admin-level access.

oTesting Detail: You need to show elevated access.If you cannot show root (or privileged access), choose another vulnerability.Run the following commands on the target machine once you have fully compromised it:

oid

ohostname

orun the hostname command on the compromised machine and then re-run the hostname command (see figure below)

owhoami

oOne of the following commands: [ ifconfig ] |[ ipconfig ]

Figure 1 Evidence of Exploitation

oRisk Assessment: Use this area to discuss what the risk represents to an organization.Would it change the risk if it were on a public-facing server as opposed to an internal server?What happens if this exploit were successful?Assume that the vulnerable software would be installed in a business environment, not your home lab network.Discuss the a few different risks that would be dependent on where and how the vulnerable software would be installed across the organization.

oMitigation and Security Control Recommendation: Discuss how you fix this vulnerability.Can you patch it?Are there additional security controls, protections, or sensing mechanisms that could be installed to lessen the impact of an attack?

Guidelines

oThe proposal document should be 7 to 10 pages, conforming to APA standards (double-spaced).

oAt least two authoritative outside references are required. These should be listed on the last page titled "References" - which does not count toward your overall page count.

oScreenshots are required for each major section - any sensitive information may be obfuscated or redacted).

.The text within the screenshot should appear readable so avoid taking "full screen" captures.Capture only the appropriate detail.The terminal command output should be no smaller than an "equivalent" 12-point font size (similar to the font in this document).

oScreenshots and images do not count toward the overall page count.The project may extend into multiple pages depending on the number of screenshots

oClear screenshots should be used.There are numerous options available to take screenshots.Use Google, or go to https://www.take-a-screenshot.org for various options.By no means should you take a picture with your smartphone or camera and paste it in.

oAppropriate in-text citations are required.

oThis will be graded on the quality of the research topic, technical demonstration/write-up, content quality, use of citations, grammar, and sentence structure, and creativity.

oThe paper is due during Week 8 of this course.

oThis paper should effectively describe the vulnerability, risks, and recommendation in a manner that will allow TECHNICAL readers to understand the vulnerability, risk, and mitigation.The course material and research should provide you with the right level of technical understanding.

oFormat: The paper must contain clearly labeled headings for each major section: Network Mapping, Vulnerability Scan, Vulnerability Research, etc.

References

ohttps://www.offensive-security.com/reports/penetration-testing-sample-report-2013.pdf (Links to an external site.)

o,Note: If you've never used Microsoft Word's "References" feature to manage citations, please invest some time in learning how to do.You'll be glad that you did. https://support.office.com/en-ie/article/Add-a-citation-and-create-a-bibliography-17686589-4824-4940-9c69-342c289fa2a5?ui=en-US&rs=en-IE&ad=IE

o,Ensure that you cite your references in the text when you are using material from the reference. https://owl.english.purdue.edu/owl/resource/560/18/

Grading Rubric

Final Deliverable

Category

Weight %

Description

PART 1 - PRE-TEST

10%

Detailed discussion commensurate with the option chosen, e.g., Local Lab build-out | Remote lab (w/Option 2A or 2B).

PART 2 - MAPPING AND SCANNING

10%

Appropriate discussion and screenshots to document the tool usage and generated output for the network mapping and vulnerability scan

PART 3 - EXPLOITATION

20%

Appropriate discussion and screenshots to document the tool usage and generated output for the exploitation phase.Screenshots should include post-exploitation commands run to demonstrate system/root access

PART 4 - ANALYSIS AND REPORTING

40%

Appropriate research and discussion, including vulnerability research, vulnerability analysis, vulnerability analysis, Risk Assessment, and recommendations. Exploitation should be written so that it could be re-created with supporting evidence.There must be clear evidence that the screenshots are not simply taken from an Internet page and that they are your own work.A technically sound and logical recommendation is provided and supported.

Word Count

10%

Spelling, grammar, and Sentence Structure

5%

Ensure your paper is professional and technically written using appropriate terminology as discussed in class

Documentationand Formatting

5%

Appropriate APA citations/referenced sources and formats of characters/content.

Total

100%

A quality paper will meet or exceed all of the above requirements.