Orange juice concentrate is canned in a juice factory. An automated canning machine pushes lids from a stack into place, and presses them onto the can, sealing them. Both cylinders retract at the same time. A pressure switch senses when an operator has placed a can in the machine, and starts the canning sequence. A start button activates the machine. A stop button deactivates the machine completely. System specifications: - Double-acting cylinders (Cyl A and Cyl B) - Pressure switch is N/O - A buzzer is activated when the press is descending, warning operators to keep their hands clear. Report on the following: 1. Briefly describe how you solved this problem (general design, electrical and pneumatic) 2. Provide a component list 3. Electrical ladder diagram and pneumatic power diagram 4. Verify your design by constructing it in the lab. Extra considerations: 1. Give the abbreviated notation for this sequence. Draw a displacement-step diagram for Cyl A, and Cyl B. 2. If a wire connecting the stop button breaks, can you turn off the machine? 3. Suggest one way in which an operator or maintenance staff member could injure themselves with this machine. How could you prevent that from happening? You may work in partners, but each member is responsible for submitting a full report. The report will consist of a title page, executive summary, answers to the extra consideration questions and the requisite drawings. On the title page, make sure to include your name, student number, the course 12