Answered step by step
Verified Expert Solution
Link Copied!

Question

1 Approved Answer

Phenol is added to mixer 1 and mixed with recycled phenol from distillation column 1 . Into a pump 1 then into mixer 2 the

Phenol is added to mixer 1 and mixed with recycled phenol from distillation column 1. Into a pump 1 then into mixer 2 the product is then mixed with fresh H2 and recycled H2. The product is sent to heat exchanger 1 then a fixed bed reactor and reacted at 100 degrees Celsius and 5 bar. Cyclohexanol, Cyclohexanone, unreacted H2 and unreacted Phenol is then passed to heat exchanger 2 then flash separator 1. h2 is removed and recycled back into the system through a compressor then back into mixer 2. The products from separator 1 are passed through pump 2 then heat exchanger 3 then distillation column 1, phenol is separated and passed through heat exchanger 4 and joins mixer 1 from cyclohexanone and cyclohexanol which are removed as top product. This product is then passed through a reboiler and heat exchanger 5 then Into Distillation column 2, cyclohexanol is removed as bottom product while cyclohexanone is removed as top product and stored. Cyclohexanol is passed through heat exchanger 7 then reacted in reactor 2 to dehydrate it into cyclohexanone. The product is passed through heat exchanger 8 then into separator 2 where hydrogen is removed as top product and cyclohexanone as bottom and sent into distillation column 1 after passing through pump 3.
Perform a MANUAL CALCULATION (by hand) energy balance to produce cyclohexanone and cyclohexanol from phenol.
USE specific heat capacity: Phenol=134.58 KJ/molK , cyclohexanone=177.20KJ/molK , Cyclohexanol=214.06 KJ/molK, H2=28.84Kj/molK
Reactor 1- Phenol conversion rate 99.9%, cyclohexanone selectivity 99.2%, cyclohexanol selectivity 0.8%
Reactor 2- temp 275C, Phenol Conversion 89% Selectivity for Cyclohexanone 93%,Pressure 1 atm
Mass flowrate= kg/hr
Molar flowrate=kmol/hr
C6H5OH +2H2=C6H10O
C6H10O + H2= C6H12O
Reflux ratio =0.68
Efficiency of separator 100%
Distillation column 1 efficiency 90%
Distillation column 2 efficiency=80%
Q11 Energy balance around heat exchanger 4
Stream 20 in, stream 21 out
stream 20
temp 165C , pressure 4 bar, phenol molar flowrate in kmol/hr =0.0039, phenol mass flowrate =0.362,Mole fraction of phenol is 1. All other components are 0
stream 21
temp 40 C , pressure 4 bar, phenol molar flowrate in kmol/hr =0.0039, phenol mass flowrate =0.362,Mole fraction of phenol is 1. All other components are 0
Q12 Energy balance around heat exchanger 5
Stream 25 in, stream 26 out
stream 26
temp 50 C , pressure 2 bar, phenol molar flowrate in kmol/hr =0.004, phenol mass flowrate =0.040,Mole fraction of phenol is 0.000. Cyclohexanone molar flowrate in kmol/hr =5.2700, Cyclohexanone mass flowrate =517.198,Mole fraction of Cyclohexanone is 0.689 Cyclohexanol molar flowrate in kmol/hr =2.3785, Cyclohexanol mass flowrate =238.232,Mole fraction of Cyclohexanol is 0.311. All other components 0.
stream 26
temp 158 C , pressure 3 bar, phenol molar flowrate in kmol/hr =0.004, phenol mass flowrate =0.040,Mole fraction of phenol is 0.000. Cyclohexanone molar flowrate in kmol/hr =5.2700, Cyclohexanone mass flowrate =517.198,Mole fraction of Cyclohexanone is 0.689 Cyclohexanol molar flowrate in kmol/hr =2.3785, Cyclohexanol mass flowrate =238.232,Mole fraction of Cyclohexanol is 0.311. All other components 0.
Q13 Energy balance around reboiler of distillation column 2
Stream 26 in, stream 27 out
stream 26
temp 158 C , pressure 3 bar, phenol molar flowrate in kmol/hr =0.004, phenol mass flowrate =0.040,Mole fraction of phenol is 0.000. Cyclohexanone molar flowrate in kmol/hr =5.2700, Cyclohexanone mass flowrate =517.198,Mole fraction of Cyclohexanone is 0.689 Cyclohexanol molar flowrate in kmol/hr =2.3785, Cyclohexanol mass flowrate =238.232,Mole fraction of Cyclohexanol is 0.311. All other components 0.
stream 27
temp 158 C , pressure 3 bar, phenol molar flowrate in kmol/hr =0.004, phenol mass flowrate =0.040,Mole fraction of phenol is 0.001. Cyclohexanone molar flowrate in kmol/hr =4.2160, Cyclohexanone mass flowrate =413.758,Mole fraction of Cyclohexanone is 0.9920. Cyclohexanol molar flowrate in kmol/hr =0.0336, Cyclohexanol mass flowrate =3.363,Mole fraction of Cyclohexanol is 0.0079. All other components 0.

Step by Step Solution

There are 3 Steps involved in it

Step: 1

blur-text-image

Get Instant Access to Expert-Tailored Solutions

See step-by-step solutions with expert insights and AI powered tools for academic success

Step: 2

blur-text-image_2

Step: 3

blur-text-image_3

Ace Your Homework with AI

Get the answers you need in no time with our AI-driven, step-by-step assistance

Get Started

Recommended Textbook for

Fundamentals Of Momentum Heat And Mass Transfer

Authors: James Welty, Gregory L. Rorrer, David G. Foster

6th Edition

1118947460, 978-1118947463

More Books

Students also viewed these Chemical Engineering questions

Question

Indicate how to present and analyze long-term debt.

Answered: 1 week ago

Question

What is the cycle of intimate partner abuse?

Answered: 1 week ago