Project 6: Configuring and Verifying Access Control Lists

Objective:

To gain experience configuring and verifying Access Control Lists.

Required:

Start with using the model you created in Project 4.

Create a VLAN 2 interface with an IP address scheme of 10.0.1.0/24.

Assign PC0 to VLAN 2 with an IP address of 10.0.1.254.

Add a second PC PC1 to Router 2 with the IP Address 10.0.0.2.

Verify full connectivity from PC1 to the network by pinging both Server0 and Server1.

Create access lists to allow traffic from PC0 to Server0 but deny access to Server1.

Create access lists to allow traffic from PC1 to Server1 but deny access to Server0.

Test your access by pinging from PC0 and PC1 to each of the servers individually.

What to Turn In:

Turn in a copy of the *.PKT file you create compressed as a ZIP file.

Turn in a copy of the running configuration for each device configured.