Q 1 A SS Distillation column of 2m diameter and 20m long is to be insulated by Rigid Fiberglass insulation of density 4Lb/f3. The temperature of the column is at 570F at the bottom and 300F at the top.. The allowed heat loss is at 50BTU/hrf2 and the surrounding temperature is at 100F. Find the thickness and the weight of the insulation needed for the column. Find total heat loss of the column Q 2 Horizontal condensers with condensation in shell and vertical condensers with condensation in tubes are the most commonly applied in industries. A sweet gas to sour gas condenser is to be designed. Inlet temperature of the sweet gas is 115F and it is to be cooled to 45F by the other gas which is heated from 20F to 75F. Uhorit=100 and Uvertical=200BTU/hrf2F. The heat duty is equal to 25MM BTUhr and the condenser may be operated 1-1. If the condenser is equal 30ft length and 0.75 inch outside diameter with 12 BWG 15/16 triangular pitch. State how you will install the condenser vertically or horizentally? How many condensers should be used, number of tubes and What is the area of the condenser?. Q 3 For a distillation column, 20m height and 2m diameter perform mechanical design of the column. You are required to calculate thickness of the plates and caps. The column is made from SS 304 at a design temperature of 200C and a pressure of 20 bars