Question 2) The Russell fracture traction device and a mechanical model of the leg are shown in the figure. The leg is kept balanced in the position shown by two weights connected to two cables. The total weight of the leg and the cast is W-250 N. The distance between points A and B, where the cables are attached to the leg, is L= 100 cm, and the angle of the leg with the bed is y=6. The distance between points A and B, where the cables are attached to the leg, is y=6 Dec is given. The point C is at three-fourths of the L measured from the point A (3L/4= 75 cm.) is the network center of the cast and leg located on the ground. The angle that cable 2 makes with the horizontal is B-40 as measured. Accordingly, in order for the leg to remain balanced in the shown position; 2 kg C BB W2 A kg Wi-Fi a) Find the pulling force T1 formed on the cable T. (Write your result in unit N) b) Find the T2 pulling force generated on cable 2. (Write your result in unit N) c) Find the angle a that cable I makes with the horizontal. 72 L 3L/4L BB W