Required information [The following information applies to the questions displayed below.] At the beginning of the year, Mitt Corporation bought machinery, shelving, and a forklift. The machinery initially cost $30,800 but had to be overhauled (ot a cost of $2,240 ) before it could be installed (at a cost of $1,120 ) and finally put into use. The machinery's total life was estimated as 40,000 hours, with an estimated residual value of $1,000. The machinery was actually used 5,000 hours in year 1 and 7,000 hours in year 2 . Repair costs were $480 in each year. The shelving cost $9,950 and was expected to last 5 years, with a residual value of $730. The forklift cost $16,650 and was expected to last six years, with a residual value of $2,260. 5. Compute double-declining-balance depreciation expense for years 1 and 2 for the forklift. TIP: Remember that the formula for double-declining-balance uses cost minus accumulated depreciation (not residual value). At the beginning of the year, Mitt Corporation bought machinery, shelving, and a forklift. The machinery initially cost $30,800 but had to be overhauled (at a cost of $2,240 ) before it could be installed (at a cost of $1,120 ) and finally put into use. The machinery's total life was estimated as 40,000 hours, with an estimated residual value of $1,000. The machinery was actually used 5,000 hours in year 1 and 7,000 hours in year 2 . Repair costs were $480 in each year. The shelving cost $9,950 and was expected to last 5 years, with a residual value of $730. The forklift cost $16,650 and was expected to last six years, with a residual value of $2,260. 6. Prepare the journal entry to record double-declining balance depreciation expense for the forklift for year 2 . (If no entry is required or a transaction/event, select "No Journal Entry Required" in the first account field.) Journal entry worksheet Record the double-declining balance depreciation expense for the forklift for year 2 . Note: Enter debits before credits use. The machinery's total life was estimated as 40,000 hours, with an estimated residual value of $1,000. The machinery was actually used 5,000 hours in year 1 and 7,000 hours in year 2 . Repair costs were $480 in each year. The shelving cost $9,950 and was expected to last 5 years, with a residual value of $730. The forklift cost $16,650 and was expected to last six years, with a residual value of $2,260. . Prepare the journal entry to record year 2 depreciation expense for the machinery. (Do not round intermediate calculations. If no entry is required for a transaction/event, select "No Journal Entry Required" in the first account field.) Required information [The following information applies to the questions displayed below.] At the beginning of the year, Mitt Corporation bought machinery, shelving, and a forklif. The machinery initially cost $30,800 but had to be overhauled (at a cost of $2,240 ) before it could be installed (at a cost of $1,120 ) and finally put into use. The machinery's total life was estimated as 40,000 hours, with an estimated residual value of $1,000. The machinery was actually used 5,000 hours in year 1 and 7,000 hours in year 2 . Repair costs were $480 in each year. The shelving cost $9,950 and was expected to last 5 years, with a residual value of $730. The forklift cost $16,650 and was expected to last six years, with a residual value of $2,260. 2. Compute year 2 units-of-production depreciation expense for the machinery. (Do not round intermediate calculations.) Required information [The following information applies to the questions displayed below.] At the beginning of the year, Mitt Corporation bought machinery, shelving, and a forklift. The machinery initially cos: $30,800 but had to be overhauled (at a cost of $2,240 ) before it could be installed (at a cost of $1,120 ) and finally put into use. The machinery's total life was estimated as 40,000 hours, with an estimated residual value of $1,000. The machinery was actually used 5,000 hours in year 1 and 7,000 hours in year 2 . Repair costs were $480 in each year. The shelving cost $9,950 and was expected to last 5 years, with a residual value of $730. The forklift cost $16,650 and was expected to last six years, with a residual value of $2,260. Required: 1. Compute the amount to be capitalized for the machinery. Required information [The following information applies to the questions displayed below.] At the beginning of the year, Mitt Corporation bought machinery, shelving, and a forklift. The machinery initially cost $30,800 but had to be overhauled (ot a cost of $2,240 ) before it could be installed (at a cost of $1,120 ) and finally put into use. The machinery's total life was estimated as 40,000 hours, with an estimated residual value of $1,000. The machinery was actually used 5,000 hours in year 1 and 7,000 hours in year 2 . Repair costs were $480 in each year. The shelving cost $9,950 and was expected to last 5 years, with a residual value of $730. The forklift cost $16,650 and was expected to last six years, with a residual value of $2,260. 5. Compute double-declining-balance depreciation expense for years 1 and 2 for the forklift. TIP: Remember that the formula for double-declining-balance uses cost minus accumulated depreciation (not residual value). At the beginning of the year, Mitt Corporation bought machinery, shelving, and a forklift. The machinery initially cost $30,800 but had to be overhauled (at a cost of $2,240 ) before it could be installed (at a cost of $1,120 ) and finally put into use. The machinery's total life was estimated as 40,000 hours, with an estimated residual value of $1,000. The machinery was actually used 5,000 hours in year 1 and 7,000 hours in year 2 . Repair costs were $480 in each year. The shelving cost $9,950 and was expected to last 5 years, with a residual value of $730. The forklift cost $16,650 and was expected to last six years, with a residual value of $2,260. 6. Prepare the journal entry to record double-declining balance depreciation expense for the forklift for year 2 . (If no entry is required or a transaction/event, select "No Journal Entry Required" in the first account field.) Journal entry worksheet Record the double-declining balance depreciation expense for the forklift for year 2 . Note: Enter debits before credits use. The machinery's total life was estimated as 40,000 hours, with an estimated residual value of $1,000. The machinery was actually used 5,000 hours in year 1 and 7,000 hours in year 2 . Repair costs were $480 in each year. The shelving cost $9,950 and was expected to last 5 years, with a residual value of $730. The forklift cost $16,650 and was expected to last six years, with a residual value of $2,260. . Prepare the journal entry to record year 2 depreciation expense for the machinery. (Do not round intermediate calculations. If no entry is required for a transaction/event, select "No Journal Entry Required" in the first account field.) Required information [The following information applies to the questions displayed below.] At the beginning of the year, Mitt Corporation bought machinery, shelving, and a forklif. The machinery initially cost $30,800 but had to be overhauled (at a cost of $2,240 ) before it could be installed (at a cost of $1,120 ) and finally put into use. The machinery's total life was estimated as 40,000 hours, with an estimated residual value of $1,000. The machinery was actually used 5,000 hours in year 1 and 7,000 hours in year 2 . Repair costs were $480 in each year. The shelving cost $9,950 and was expected to last 5 years, with a residual value of $730. The forklift cost $16,650 and was expected to last six years, with a residual value of $2,260. 2. Compute year 2 units-of-production depreciation expense for the machinery. (Do not round intermediate calculations.) Required information [The following information applies to the questions displayed below.] At the beginning of the year, Mitt Corporation bought machinery, shelving, and a forklift. The machinery initially cos: $30,800 but had to be overhauled (at a cost of $2,240 ) before it could be installed (at a cost of $1,120 ) and finally put into use. The machinery's total life was estimated as 40,000 hours, with an estimated residual value of $1,000. The machinery was actually used 5,000 hours in year 1 and 7,000 hours in year 2 . Repair costs were $480 in each year. The shelving cost $9,950 and was expected to last 5 years, with a residual value of $730. The forklift cost $16,650 and was expected to last six years, with a residual value of $2,260. Required: 1. Compute the amount to be capitalized for the machinery