Scribners Corporation produces fine popers in three production departments-Pulping. Drying, and Finishing. In the Pulping Department, raw materials such as wood fiber and rag cotton are mechanically and chemically treated to soporate their fibers. The result is a thick slurry of nbers. In the Drying Department, the wet fibers transferred from the Pulping Department are laid down on porous webs, pressed to remove excess liquid, and dried in ovens. In the Finishing Department, the dried paper is coated, cut, and spooled onto reels. The company uses the weighted-average method in its process costing system. Data for March for the Drying Department follow: No materials are added in the Drying Department. Pulping cost represents the costs of the wet fibers transferred in from the Pulping Departgent. Vet fiber is processed in the Drying Department in botches: each unit in the above table is a batch and one batch of wot fibers produces a set amount of dried paper that is passed on to the Finishing Department. Required: For March: 1. Compute the Drying Department's equivalent units of production for pulping and corversion. 2. Compute the Drying Department's cost per equivalent unit for pulping and conversion. 3. Compute the Drying Departments cost of ending work in process inventory for pulping. conversion, and in total. 4. Compute the Drying Department's cost of uniss transferred out to the Finishing Department for pulping, conversion, and in total. 5. Prepare a cost reconciliation report for the Drying Department. Complete this question by entering your answers in the tabs below