Task: Complete the lab by setting up OSPF using multiarea, as specified in the diagram. Show results of pings from the host as well as routing tables from each router.

Also if you can show all the commands for each configuration. I will highly appreciate so I can do it myself.

Packet Tracer - IPv6 - Skills Integration Challenge

Topology

Scenario

NetVise Corporation has agreed to allow the network engineering team to design and integrate an IPv6 network based on their previous pilot configurations. However, the network must go into production immediately in order to resume business operations. You should complete this skills integration challenge within a 1 hour timespan.

Prior to starting this lab, your manager provided you with some supporting training material. You are expected to review the provided material thoroughly before starting this lab.
 

Addressing Table
 

Device	Interface	Type	IP Address	Prefix	Default Gateway
ISP	S0/0/0	Global Unicast	2001:acad:0:1::1	/64	N/A
R1	S0/0/0	Global Unicast	2001:acad:0:12::1	/64	N/A
	S0/0/1	Global Unicast	2001:acad:0:13::1	/64	N/A
	S0/1/0	Global Unicast	2001:acad:0:1::2	/64	N/A
	G0/0	Global Unicast	2001:acad:0:99::1	/64	N/A
R2	S0/0/0	Global Unicast	2001:acad:0:12::2	/64	N/A
	G0/0	Global Unicast	2001:acad:0:21::1	/64	N/A
	G0/1	Global Unicast	2001:acad:0:22::1	/64	N/A
R3	S0/0/0	Global Unicast	2001:acad:0:13::2	/64	N/A
	G0/0	Global Unicast	2001:acad:0:31::1	/64	N/A
	G0/1	Global Unicast	2001:acad:0:32::1	/64	N/A
PC1	NIC	Static	2001:acad:0:21::100	/64	2001:acad:0:21::1
PC2	NIC	Static	2001:acad:0:22::100	/64	2001:acad:0:22::1
PC3	NIC	EUI-64	Varies	/64	2001:acad:0:31::1
PC4	NIC	DHCPv6	Varies	/64	2001:acad:0:32::1
Web Server	NIC	Static	2001:acad:0:99::100	/64	2001:acad:0:99::1

 

1. Objectives

• Develop hierarchical IPv6 addressing scheme
• Assign interfaces and hosts IPv6 addresses
  • Static
  • EUI-64
  • DHCPv6
• Configure IPv6 dynamic routing using EIGRPv6
• Configure static and default routing to support the network requirements
• Utilize access control lists to restrict web server access
  
  Task 1: Develop hierarchical IPv6 addressing scheme and assign interfaces and hosts IPv6 address appropriately. 

Step 1: Your ISP has assigned the global prefix of 2001:acad::/64, given this information you must develop an IPv6 addressing scheme to meet the network requirements. Document all IPv6 address information in the address table provided.

 

Step 2: Assign network infrastructure interfaces with IPv6 addresses according to the address table and enable IPv6 unicast routing.

 

Step 3: Assign hosts with IPv6 addresses according to the address table.

• Web server, PC1, and PC2 are all assigned statically, no additional configuration is required besides manually entering the IPv6 address and default gateway in the GUI.
• PC3 should be enabled for stateless autoconfiguration, by selecting "auto-config" for the IPv6 address and default gateway.
• R3 should be configured as a DHCPv6 server to issue IPv6 address information to PC4.
  • Address Prefix: 2001:acad:0:32::/64
  • Domain Name: netspace.com
  • DNS Server: 2001:4860:4860::8888

1. Task 2: Configure IPv6 dynamic routing using EIGRPv6 

Step 1: Enable EIGRPv6 and assign router-ids, use an autonomous system number of your choosing. 

• R1 - 1.1.1.1/32 Lo0
• R2 - 2.2.2.2/32 Lo0
• R3 - 3.3.3.3/32 Lo0

Step 2: Enable the appropriate interfaces for EIGRPv6 to allow for full reachability. 

Step 3: Summarize networks coming from R2 LAN interfaces. 

 

1. Task 3: Configure static and default routing to support the network requirements

Step 1: Redistribute default route into the EIGRP process for R2 and R3 to reach the internet (ISP).

NOTE: A bug occurs when you attempt create a loopback address for the static default route, it will not show up in the routing table, in this case a physical interface is used, but is against best practice.

 

Step 2: Configure a default static route on the ISP Router to allow full reachability.
 

Task 4: Utilize access control lists to restrict web server access
 

Step 1: Create an ACL that blocks HTTP and FTP traffic sourcing from PC1 and PC2 and permits all other traffic from any sources. 

CoursHeroTranscribedText

WEB SERVER GO/0 SW1 PC1 R2 S0/0/0 G0/1 SW2 PC2 GO/O SO/0/0 (DCE) R1 SO/0/1 (DCE) SO/1/0 SO/0/1 GO/0 SW3 PC3 S0/0/0 (DCE) R3 K ISP G0/1 SW4 PC4