The question is kind of confusing so I include 2 test cases. Please write in c.

First: Bit functions (35 Points You have to write a program that will read a number followed by a series of bit operations from a file and perform the given operations sequentially on the number. The operations are as follows set(x, n, v)sets the nth bit of the number x to v comp(x, n)sets the value of the nth bit of x to its complement (1 if 0 and 0 otherwise) get (x, n) The least significant bit (LSB) is considered to be index 0 returns the value of the nth bit of the number x Input format: Your program the value of the number to be manipulated. For the function calls this number can be considered x. This number should be considered an unsigned short. The following lines will contain the op- erations to manipulate the number. The format of the operations will always be the command followed by 2 numbers with tabs in between each part. For the set(x, n. v) command, the value of the second number will always be either 0 or 1. For the comp(x, n) and get(x, n) command the value of the second number will always be 0 and can be ignored will take the file name as input. The first line in the file provides Output format: Your output will be the resulting value of the number x after each operation, each on a new line. The get(x, n) function should only print the value of the nth bit as the value of x does not change. Example Execution: For example, a sample input file "filel.txt" contains: get 0 0 comp 0 set 1 1 The result of the sample run is: $./first filel.txt 4