TNR comp is canceled (G40) for G70 cycle- .01 Finish allowance-Z Material removed- by rough turning TNR comp is in effect (G42) at start point TNR comp is canceled (G40) at tool change position -Return 1- Pass 13 -Return 2- .20 Pass 2 depth of cut TNR comp is canceled (G40) for G71 cycle per pass R.5 05.5 G71 roughing cycle G70 finishing cycle- Return 91 Pass 9- C.01 finish Material left for finishing allowance-X per side Z Clearance in Z 5 5.5 DIA. BAR STOCK -4.5 IN. LONG 012 Point X(in) diameter Z(in) 23 22 45 5.5 0.3 5.5 0.1 0.1 2 0 6 2 -1 7 3 -3 8 3 -3.2 9 3.7 -3.2 10 4.7 -3.7 11 4.7 -4 12 5.5 -4 13 5.6 -4 CNC TOOL AND OPERATIONS SHEET MATERIAL: AL ALLOY 7075-T6 TOOL OFF-SET OPERATION 1 01 ROUGH TURN OD 2 02 32 USE A G71 ROUGHING CYCLE. REMOVE 10 PER SIDE FOR EACH PASS. LEAVE.01 FOR FINISHING. FEED SPEED (IPR) TOOL DESCRIPTION 450 .015 FINISH OD CONTOUR 800 .005 USE A G70 FINISHING CYCLE. INSERT TNR TURNING HOLDER CNMG-432-NR 032 MCLNR 12-4 TURNING HOLDER CNMG-434-NF 063 MCLNR 12-4