Two V-shaped conveyor belts of inelastic material are attached parallel to the same pulley. The position of the driven pulley and the drive pulley is 30 from the horizontal plane with a distance between the two shafts of 1 meter. The groove angle on the V-type pulley is 45 with a diameter of 500mm and operate at a speed of 300 rpm. The cross-section of each belt is 800mm with coefficient of friction between the pulley and belt is 0.3. The density of the conveyor belt is 2000 kg/m and the maximum allowable stress is 50 kN/m. Determine a. The transmitted of power b. Shaft speed when the power is transmitted is maximum. (10 marks)