Using python program and by using raise method print 0 to 4 for six times each numberhowever the printing output will be interupt by user where when user press CTRL C the printing will move to next line and print the next number after printed finish the left out number will be resume for the rest also the code will count how many times was CTRL C pressedplease provide documentation thanks

Write or modify the above program to handle keyboard interrupts to produce the following output effects. Below shows 3 separate runs with their sample outputs. In this prograin, each number (0.1.2,3) is displayed 6 times starting from left to right until "done". Each number is displayed for 0.5s interval before the next one is displayed on the same line. Basically, the program prints out the 4 numbers for 6 times each, starting from 0. After one number completes o repetitions, the next number in sequence will be chosen, provided that no keyboard interrupt is pressed. But if in the middle of execution, a keyboard interrupt (ctrl-C) is pressed, then the laying will change to the next number in sequence which has not completed its 6 appearances. Program terminates when every number has been displayed for 6 times each, and done" or calculations are finally displayed First runeg. OOOOO01111112 2 2 2 2 2 3 3 3 3 3 3 done Number of ctrl+C presses = 0 Second run e.g (ctrl+C is pressed here, start a new line with the next member) OOOOO 01 1 2 2 2 2 2 2 3 3 3 3 3 31111 done Number of ctrl+C presses = 1 Third run e.g. 0000001111 (First, a ctrl+C is pressed here) 2 2 2 2 2 2 3 33 (Then, another ctrl+C is pressed here) 1 1 3 3 3 done Number of ctrl+C presses = 2