Using the attached 10-K calculate NOPAT for 2013. Assume that the combined federal and state statutory tax rate is 37%. Please include the computations (including the inputs into each formula). Thank you. I calculated mine already but not sure if I pulled the right data from 10K report (I got5,067)

10-K 1 a14-5644_110k.htm 10-K Table of Contents UNITED STATES SECURITIES AND EXCHANGE COMMISSION Washington, D.C. 20549 FORM 10-K x ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934 For the fiscal year ended December 31, 2013 Commission file number 1-3285 3M COMPANY State of Incorporation: Delaware I.R.S. Employer Identification No. 41-0417775 Principal executive offices: 3M Center, St. Paul, Minnesota 55144 Telephone number: (651) 733-1110 SECURITIES REGISTERED PURSUANT TO SECTION 12(b) OF THE ACT: Title of each class Common Stock, Par Value $.01 Per Share Name of each exchange on which registered New York Stock Exchange, Inc. Chicago Stock Exchange, Inc. Note: The common stock of the Registrant is also traded on the SWX Swiss Exchange. Securities registered pursuant to section 12(g) of the Act: None Indicate by check mark if the Registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes x No o Indicate by check mark if the Registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. Yes o No x Indicate by check mark whether the Registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the Registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes x No o Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files). Yes x No o Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of Registrant's knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K. x Indicate by check mark whether the Registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of \"large accelerated filer,\" \"accelerated filer\" and \"smaller reporting company\" in Rule 12b-2 of the Exchange Act. Large accelerated filer x Yes o Accelerated filer o Non-accelerated filer o (Do not check if a smaller reporting company) Smaller reporting company o Indicate by check mark whether the Registrant is a shell company (as defined in Rule 12b-2 of the Act). No x The aggregate market value of voting stock held by nonaffiliates of the Registrant, computed by reference to the closing price and shares outstanding, was approximately $85.0 billion as of January 31, 2014 (approximately $74.7 billion as of June 28, 2013, the last business day of the Registrant's most recently completed second quarter). Shares of common stock outstanding at January 31, 2014: 662,692.234. DOCUMENTS INCORPORATED BY REFERENCE Parts of the Company's definitive proxy statement (to be filed pursuant to Regulation 14A within 120 days after Registrant's fiscal year-end of December 31, 2013) for its annual meeting to be held on May 13, 2014, are incorporated by reference in this Form 10-K in response to Part III, Items 10, 11, 12, 13 and 14. Table of Contents 3M COMPANY FORM 10-K For the Year Ended December 31, 2013 TABLE OF CONTENTS Beginning Page PART I ITEM 1 Business 3 ITEM 1A Risk Factors 9 ITEM 1B Unresolved Staff Comments 11 ITEM 2 Properties 11 ITEM 3 Legal Proceedings 11 ITEM 4 Mine Safety Disclosures 11 Market for Registrant's Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities 12 ITEM 6 Selected Financial Data 14 ITEM 7 Management's Discussion and Analysis of Financial Condition and Results of Operations 15 ITEM 7A Quantitative and Qualitative Disclosures About Market Risk 41 ITEM 8 Financial Statements and Supplementary Data 43 Index to Financial Statements 43 PART II ITEM 5 ITEM 9 Changes in and Disagreements with Accountants on Accounting and Financial Disclosure 118 ITEM 9A Controls and Procedures 118 ITEM 9B Other Information 118 Directors, Executive Officers and Corporate Governance 119 ITEM 11 Executive Compensation 119 ITEM 12 Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters 120 ITEM 13 Certain Relationships and Related Transactions, and Director Independence 120 ITEM 14 Principal Accounting Fees and Services 120 Exhibits, Financial Statement Schedules 121 PART III ITEM 10 PART IV ITEM 15 2 Table of Contents 3M COMPANY ANNUAL REPORT ON FORM 10-K For the Year Ended December 31, 2013 PART I Item 1. Business. 3M Company was incorporated in 1929 under the laws of the State of Delaware to continue operations begun in 1902. The Company's ticker symbol is MMM. As used herein, the term \"3M\" or \"Company\" includes 3M Company and its subsidiaries unless the context indicates otherwise. In this document, for any references to Note 1 through Note 17, refer to the Notes to Consolidated Financial Statements in Item 8. Available Information The SEC maintains a website that contains reports, proxy and information statements, and other information regarding issuers, including the Company, that file electronically with the SEC. The public can obtain any documents that the Company files with the SEC at http://www.sec.gov. The Company files annual reports, quarterly reports, proxy statements and other documents with the Securities and Exchange Commission (SEC) under the Securities Exchange Act of 1934 (Exchange Act). The public may read and copy any materials that the Company files with the SEC at the SEC's Public Reference Room at 100 F Street, N.E., Washington, D.C. 20549. The public may obtain information on the operation of the Public Reference Room by calling the SEC at 1-800-SEC-0330. 3M also makes available free of charge through its website (http://investor.3M.com) the Company's Annual Report on Form 10-K, Quarterly Reports on Form 10-Q, Current Reports on Form 8-K, and, if applicable, amendments to those reports filed or furnished pursuant to the Exchange Act as soon as reasonably practicable after the Company electronically files such material with, or furnishes it to, the SEC. General 3M is a diversified technology company with a global presence in the following businesses: Industrial; Safety and Graphics; Electronics and Energy; Health Care; and Consumer. 3M is among the leading manufacturers of products for many of the markets it serves. Most 3M products involve expertise in product development, manufacturing and marketing, and are subject to competition from products manufactured and sold by other technologically oriented companies. At December 31, 2013, the Company employed 88,667 people (full-time equivalents), with 34,719 employed in the United States and 53,948 employed internationally. Business Segments As described in Note 15 to the Consolidated Financial Statements, effective in the first quarter of 2013, the Company completed a realignment of its business segments to better serve global markets and customers. In addition, as described in Note 16, during the first quarter of 2013, 3M realigned its geographic area structure to include Puerto Rico in the United States rather than in the Latin America/Canada region. Segment and geographic area information presented herein reflects the impact of these changes for all periods presented. 3M manages its operations in five operating business segments: Industrial; Safety and Graphics; Electronics and Energy; Health Care; and Consumer. 3M's five business segments bring together common or related 3M technologies, enhancing the development of innovative products and services and providing for efficient sharing of business resources. These segments have worldwide responsibility for virtually all 3M product lines. Certain small businesses and lab-sponsored products, as well as various corporate assets and expenses, are not attributed to the business segments. Financial information and other disclosures relating to 3M's business segments and operations in major geographic areas are provided in the Notes to Consolidated Financial Statements. Industrial Business: The Industrial segment serves a broad range of markets, such as automotive original equipment manufacturer (OEM) and automotive aftermarket (auto body shops and retail), electronics, appliance, paper and printing, packaging, food and beverage, and construction. Industrial products include tapes, a wide variety of coated, non-woven and bonded abrasives, adhesives, advanced ceramics, sealants, specialty materials, 3M Purification Inc. (filtration products), closure systems for personal hygiene products, acoustic systems products, and components and products that 3 Table of Contents are used in the manufacture, repair and maintenance of automotive, marine, aircraft and specialty vehicles. In the fourth quarter of 2012, 3M acquired Ceradyne, Inc., which develops and produces advanced technical ceramics for demanding applications in the automotive, oil and gas, solar, industrial, electronics and defense industries. In 2011, 3M acquired Winterthur Technologie AG, a leading global supplier of precision grinding technology serving customers in the area of hard-to-grind precision applications in industrial, automotive, aircraft and cutting tools. Major industrial products include vinyl, polyester, foil and specialty industrial tapes and adhesives; Scotch Masking Tape, Scotch Filament Tape and Scotch Packaging Tape; packaging equipment; 3M VHB Bonding Tapes; conductive, low surface energy, sealants, hot melt, spray and structural adhesives; reclosable fasteners; label materials for durable goods; and coated, nonwoven and microstructured surface finishing and grinding abrasives for the industrial market. 3M Purification Inc. provides a comprehensive line of filtration products for the separation, clarification and purification of fluids and gases. Other industrial products include fluoroelastomers for seals, tubes and gaskets in engines. Major transportation products include insulation components, including Thinsulate Acoustic Insulation and components for catalytic converters; functional and decorative graphics; abrasion-resistant films; adhesives; sealants; masking tapes; fasteners and tapes for attaching nameplates, trim, moldings, interior panels and carpeting; coated, nonwoven and microstructured finishing and grinding abrasives; structural adhesives; and other specialty materials. In addition, 3M provides paint finishing and detailing products, including a complete system of cleaners, dressings, polishes, waxes and other products. Safety and Graphics Business: The Safety and Graphics segment serves a broad range of markets that increase the safety, security and productivity of people, facilities and systems. Major product offerings include personal protection products; traffic safety and security products, including border and civil security solutions; commercial graphics sheeting and systems; architectural surface and lighting solutions; cleaning and protection products for commercial establishments; and roofing granules for asphalt shingles. This segment's products include personal protection products, such as certain maintenance-free and reusable respirators, personal protective equipment, head and face protection, body protection, hearing protection and protective eyewear. In traffic safety and security, 3M provides reflective sheeting used on highway signs, vehicle license plates, construction work-zone devices, trucks and other vehicles, and also provides pavement marking systems, in addition to electronic surveillance products, films that protect against counterfeiting, and reflective materials that are widely used on apparel, footwear and accessories, enhancing visibility in low-light situations. Traffic safety and security also provides finger, palm, face and iris biometric systems for governments, law enforcement agencies, and commercial enterprises, in addition to remote people-monitoring technologies used for offender-monitoring applications. Major commercial graphics products include films, inks, digital signage systems and related products used to produce graphics for vehicles, signs and interior surfaces. Other products include spill-control sorbents; nonwoven abrasive materials for floor maintenance and commercial cleaning; floor matting; and natural and color-coated mineral granules for asphalt shingles. Electronics and Energy Business: The Electronics and Energy segment serves customers in electronics and energy markets, including solutions for dependable, cost-effective, high-performance electronic devices, telecommunications networks, electrical products, power generation and distribution, and infrastructure protection. This segment's electronics solutions include optical film solutions for the electronic display industry. 3M provides distinct products for five market segments, including products for: 1) LCD computer monitors, 2) LCD televisions, 3) hand-held devices such as cellular phones and tablets, 4) notebook PCs and 5) automotive displays. This segment also provides desktop and notebook computer screen filters that address display light control, privacy, and glare reduction needs. Major electronics products also include packaging and interconnection devices; high performance fluids and abrasives used in the manufacture of computer chips, and for cooling electronics and lubricating computer hard disk drives; and high-temperature and display tapes. 3M Flexible Circuits use electronic packaging and interconnection technology, providing more connections in less space, and are used in ink-jet printer cartridges, cell phones and electronic devices. This segment also includes the touch systems business, including touch screens, touch monitors, and touch sensor components. This segment's energy solutions include electrical, telecommunications, renewable energy, and infrastructure protection products. This segment serves the worlds electrical and telecommunications markets, including electrical utilities, electrical construction, maintenance and repair, original equipment manufacturers (OEM), telecommunications central office, outside plant and enterprise, as well as aerospace, military, automotive and medical markets, with products that enable the efficient transmission of electrical power and speed the delivery of information. Products in this segment include pressure sensitive tapes and resins, electrical insulation, a wide array of fiber-optic and copper-based telecommunications systems for rapid deployment of fixed and wireless networks, as well as the 3M Aluminum 4 Table of Contents Conductor Composite Reinforced (ACCR) electrical power cable that increases transmission capacity for existing power lines. This segment also includes renewable energy component solutions for the solar and wind power industries, as well as infrastructure products solutions that provide municipalities both protection and detection solutions for electrical, oil, natural gas, water, rebar and other infrastructure assets. Health Care Business: The Health Care segment serves markets that include medical clinics and hospitals, pharmaceuticals, dental and orthodontic practitioners, health information systems, and food manufacturing and testing. Products and services provided to these and other markets include medical and surgical supplies, skin health and infection prevention products, inhalation and transdermal drug delivery systems, dental and orthodontic products (oral care), health information systems, and food safety products. In the medical and surgical areas, 3M is a supplier of medical tapes, dressings, wound closure products, orthopedic casting materials, electrodes and stethoscopes. In infection prevention, 3M markets a variety of surgical drapes, masks and preps, as well as sterilization assurance equipment and patient warming solutions designed to prevent hypothermia in surgical settings. Other products include drug delivery systems, such as metered-dose inhalers, transdermal skin patches and related components. Dental and orthodontic products include restoratives, adhesives, finishing and polishing products, crowns, impression materials, preventive sealants, professional tooth whiteners, prophylaxis and orthodontic appliances, as well as digital workflow solutions to transform traditional impression and analog processes. In health information systems, 3M develops and markets computer software for hospital coding and data classification, and provides related consulting services. 3M provides food safety products that make it faster and easier for food processors to test the microbiological quality of food. Consumer Business: The Consumer segment serves markets that include consumer retail, office retail, home improvement, building maintenance and other markets. Products in this segment include office supply products, stationery products, construction and home improvement products (do-it-yourself), home care products, protective material products, certain consumer retail personal safety products, and consumer health care products. Major consumer products include Scotch brand products, such as Scotch Magic Tape, Scotch Glue Stick and Scotch Cushioned Mailer; Post-it Products, such as Post-it Flags, Post-it Note Pads, Post-it Labeling & Coverup Tape, and Post-it Pop-up Notes and Dispensers; construction and home improvement products, including surfacepreparation and wood-finishing materials, Command Adhesive Products and Filtrete Filters for furnaces and air conditioners; home care products, including Scotch-Brite Scour Pads, Scotch-Brite Scrub Sponges, Scotch-Brite Microfiber Cloth products, O-Cel-O Sponges; protective material products, such as Scotchgard Fabric Protectors; certain maintenance-free respirators; certain consumer retail personal safety products, including safety glasses, hearing protectors, and 3M Thinsulate Insulation, which is used in jackets, pants, gloves, hats and boots to keep people warm; Nexcare Adhesive Bandages; and ACE branded (and related brands) elastic bandage, supports and thermometer product lines. Distribution 3M products are sold through numerous distribution channels, including directly to users and through numerous wholesalers, retailers, jobbers, distributors and dealers in a wide variety of trades in many countries around the world. Management believes the confidence of wholesalers, retailers, jobbers, distributors and dealers in 3M and its products a confidence developed through long association with skilled marketing and sales representatives has contributed significantly to 3M's position in the marketplace and to its growth. 5 Table of Contents Research and Patents Research and product development constitutes an important part of 3M's activities and has been a major driver of 3M's sales growth. Research, development and related expenses totaled $1.715 billion in 2013, $1.634 billion in 2012 and $1.570 billion in 2011. Research and development, covering basic scientific research and the application of scientific advances in the development of new and improved products and their uses, totaled $1.150 billion in 2013, $1.079 billion in 2012 and $1.036 billion in 2011. Related expenses primarily include technical support provided by 3M to customers who are using existing 3M products; internally developed patent costs, which include costs and fees incurred to prepare, file, secure and maintain patents; amortization of externally acquired patents and externally acquired in-process research and development; and gains/losses associated with certain corporate approved investments in R&D-related ventures, such as equity method effects and impairments. The Company's products are sold around the world under various trademarks. The Company also owns, or holds licenses to use, numerous U.S. and foreign patents. The Company's research and development activities generate a steady stream of inventions that are covered by new patents. Patents applicable to specific products extend for varying periods according to the date of patent application filing or patent grant and the legal term of patents in the various countries where patent protection is obtained. The actual protection afforded by a patent, which can vary from country to country, depends upon the type of patent, the scope of its coverage and the availability of legal remedies in the country. The Company believes that its patents provide an important competitive advantage in many of its businesses. In general, no single patent or group of related patents is in itself essential to the Company as a whole or to any of the Company's business segments. The importance of patents in the Electronics and Energy segment is described in \"Performance by Business Segment\" \"Electronics and Energy Business\" in Part II, Item 7, of this Annual Report on Form 10-K. Raw Materials In 2013, the Company experienced stable to declining costs for most raw material categories and transportation fuel. This was driven by year-on-year cost decreases in many feedstock categories, including petroleum based materials, minerals, metals and wood pulp based products. To date, the Company is receiving sufficient quantities of all raw materials to meet its reasonably foreseeable production requirements. It is impossible to predict future shortages of raw materials or the impact any such shortages would have. 3M has avoided disruption to its manufacturing operations through careful management of existing raw material inventories and development and qualification of additional supply sources. 3M manages commodity price risks through negotiated supply contracts, price protection agreements and forward physical contracts. Environmental Law Compliance 3M's manufacturing operations are affected by national, state and local environmental laws around the world. 3M has made, and plans to continue making, necessary expenditures for compliance with applicable laws. 3M is also involved in remediation actions relating to environmental matters from past operations at certain sites (refer to \"Environmental Matters and Litigation\" in Note 13, Commitments and Contingencies). Environmental expenditures relating to existing conditions caused by past operations that do not contribute to current or future revenues are expensed. Reserves for liabilities for anticipated remediation costs are recorded on an undiscounted basis when they are probable and reasonably estimable, generally no later than the completion of feasibility studies or the Company's commitment to a plan of action. Environmental expenditures for capital projects that contribute to current or future operations generally are capitalized and depreciated over their estimated useful lives. In 2013, 3M expended about $31 million for capital projects related to protecting the environment. This amount excludes expenditures for remediation actions relating to existing matters caused by past operations that do not contribute to current or future revenues, which are expensed. Capital expenditures for environmental purposes have included pollution control devices such as wastewater treatment plant improvements, scrubbers, containment structures, solvent recovery units and thermal oxidizers at new and existing facilities constructed or upgraded in the normal course of business. Consistent with the Company's policies stressing environmental responsibility, capital expenditures (other than for remediation projects) for known projects are presently expected to be about $54 million over the next two years for new or expanded programs to build facilities or modify manufacturing processes to minimize waste and reduce emissions. While the Company cannot predict with certainty the future costs of such cleanup activities, capital expenditures or operating costs for environmental compliance, the Company does not believe they will have a material effect on its capital expenditures, earnings or competitive position. 6 Table of Contents Executive Officers Following is a list of the executive officers of 3M, and their age, present position, the year elected to their present position and other positions they have held during the past five years. No family relationships exist among any of the executive officers named, nor is there any undisclosed arrangement or understanding pursuant to which any person was selected as an officer. This information is presented in the table below as of the date of the 10-K filing (February 13, 2014). Name Inge G. Thulin Age 60 Present Position Chairman of the Board, President and Chief Executive Officer Year Elected to Present Position 2012 Other Positions Held During 2009-2013 President and Chief Executive Officer, 2012 Executive Vice President and Chief Operating Officer, 2011-2012 Executive Vice President, International Operations, 2004-2011 Julie L. Bushman 52 Senior Vice President, Business Transformation and Information Technology 2013 Executive Vice President, Safety and Graphics, 2012-2013 Executive Vice President, Safety Security and Protection Services Business, 2011-2012 Vice President and General Manager, Occupational Health and Environmental Safety Division, 20072011 Joaquin Delgado 54 Executive Vice President, Health Care 2012 Executive Vice President, Electro and Communications Business, 20092012 Vice President and General Manager, Electronics Markets Materials Division, 2007-2009 Ivan K. Fong 52 Senior Vice President, Legal Affairs and General Counsel 2012 General Counsel, U.S. Department of Homeland Security, 2009-2012 Chief Legal Officer and Secretary, Cardinal Health Inc., 2005-2009 Ian F. Hardgrove 63 Senior Vice President, Corporate Communications and Enterprise Services 2014 Senior Vice President, Marketing, Sales and Communications, 2011-2013 Vice President and General Manager, Automotive Aftermarket Division, 2003-2011 Christopher D. Holmes 54 Senior Vice President, Supply Chain 2012 Executive Vice President, Industrial and Transportation Business, 2011-2012 Vice President and General Manager, Abrasives Systems Division, 20072011 Michael A. Kelly 57 Executive Vice President, Electronics and Energy 2012 Executive Vice President, Display and Graphics Business, 2006-2012 7 Table of Contents Name Frank R. Little Age 53 Present Position Executive Vice President, Safety and Graphics Business Group Year Elected to Present Position 2013 Other Positions Held During 2009-2013 Vice President and General Manager, Personal Safety Division, 2013 Vice President and General Manager, Occupational Health and Environmental Safety Division, 20112012 Managing Director, 3M Korea, 20082011 Marlene M. McGrath 51 Senior Vice President, Human Resources 2012 Senior Vice President, Human Resources and Interim General Counsel, 2012 Vice President, Human Resources, International Operations, 2010-2012 Director, Human Resources, International Operations, 2006-2010 David W. Meline 56 Senior Vice President and Chief Financial Officer 2011 Vice President, Corporate Controller and Chief Accounting Officer, 2008-2011 Frederick J. Palensky 64 Executive Vice President, Research and Development and Chief Technology Officer 2006 Michael F. Roman 54 Senior Vice President, Business Development 2013 Vice President and General Manager, Industrial Adhesives and Tapes Division, 2011-2013 Vice President and General Manager, Renewable Energy Division, 20092011 Vice President, Business Development, Optical Systems Division, Asia, 20082009 Brad T. Sauer 54 Executive Vice President, Industrial 2012 Executive Vice President, Health Care Business, 2004-2012 Hak Cheol Shin 56 Executive Vice President, International Operations 2011 Executive Vice President, Industrial and Transportation Business, 2006-2011 Jesse G. Singh 48 Senior Vice President, Marketing and Sales 2014 Vice President and General Manager, Stationery and Office Supplies Division, 2012-2013 President, Sumitomo 3M Limited, 20072012 Michael G. Vale 47 Executive Vice President, Consumer 2012 Executive Vice President, Consumer and Office Business, 2011-2012 Managing Director, 3M Brazil, 20092011 Vice President and General Manager, Aearo Technologies Inc., 2008-2009 8 Table of Contents Cautionary Note Concerning Factors That May Affect Future Results This Annual Report on Form 10-K, including \"Management's Discussion and Analysis of Financial Condition and Results of Operations\" in Item 7, contains forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995. The Company may also make forward-looking statements in other reports filed with the Securities and Exchange Commission, in materials delivered to shareholders and in press releases. In addition, the Company's representatives may from time to time make oral forward-looking statements. Forward-looking statements relate to future events and typically address the Company's expected future business and financial performance. Words such as \"plan,\" \"expect,\" \"aim,\" \"believe,\" \"project,\" \"target,\" \"anticipate,\" \"intend,\" \"estimate,\" \"will,\" \"should,\" \"could\" and other words and terms of similar meaning, typically identify such forward-looking statements. In particular, these include, among others, statements relating to the Company's strategy for growth, future revenues, earnings, cash flow, uses of cash and other measures of financial performance, and market position, worldwide economic and capital markets conditions, such as interest rates, foreign currency exchange rates, financial conditions of our suppliers and customers, and natural and other disasters affecting the operations of the Company or our suppliers and customers, new business opportunities, product development, and future performance or results of current or anticipated products, the scope, nature or impact of acquisition, strategic alliance and divestiture activities, the outcome of contingencies, such as legal and regulatory proceedings, future levels of indebtedness, common stock repurchases and capital spending, future availability of and access to credit markets, pension and postretirement obligation assumptions and future contributions, asset impairments, tax liabilities, information technology security, and the effects of changes in tax, environmental and other laws and regulations in the United States and other countries in which we operate. The Company assumes no obligation to update or revise any forward-looking statements. Forward-looking statements are based on certain assumptions and expectations of future events and trends that are subject to risks and uncertainties. Actual future results and trends may differ materially from historical results or those reflected in any such forward-looking statements depending on a variety of factors. Important information as to these factors can be found in this document, including, among others, \"Management's Discussion and Analysis of Financial Condition and Results of Operations\" under the headings of \"Overview,\" \"Critical Accounting Estimates\" and \"Financial Condition and Liquidity.\" Discussion of these factors is incorporated by reference from Part I, Item 1A, \"Risk Factors,\" of this document, and should be considered an integral part of Part II, Item 7, \"Management's Discussion and Analysis of Financial Condition and Results of Operations.\" For additional information concerning factors that may cause actual results to vary materially from those stated in the forward-looking statements, see our reports on Form 10-K, 10-Q and 8K filed with the SEC from time to time. Item 1A. Risk Factors. Provided below is a cautionary discussion of what we believe to be the most important risk factors applicable to the Company. Discussion of these factors is incorporated by reference into and considered an integral part of Part II, Item 7, \"Management's Discussion and Analysis of Financial Conditions and Results of Operations.\" * Results are impacted by the effects of, and changes in, worldwide economic and capital markets conditions. The Company operates in more than 70 countries and derives approximately two-thirds of its revenues from outside the United States. The Company's business is subject to global competition and may be adversely affected by factors in the United States and other countries that are beyond its control, such as disruptions in financial markets, economic downturns in the form of either contained or widespread recessionary conditions, elevated unemployment levels, sluggish or uneven recovery, in specific countries or regions, or in the various industries in which the Company operates; social, political or labor conditions in specific countries or regions; natural and other disasters affecting the operations of the Company or its customers and suppliers; or adverse changes in the availability and cost of capital, interest rates, tax rates, or regulations in the jurisdictions in which the Company operates. * The Company's credit ratings are important to 3M's cost of capital. The major rating agencies routinely evaluate the Company's credit profile and assign debt ratings to 3M. The Company currently has an AA- credit rating, with a stable 9 Table of Contents outlook, from Standard & Poor's and an Aa2 credit rating, with a stable outlook, from Moody's Investors Service. This evaluation is based on a number of factors, which include financial strength, business and financial risk, as well as transparency with rating agencies and timeliness of financial reporting. The Company's current ratings have served to lower 3M's borrowing costs and facilitate access to a variety of lenders. Failure to maintain strong investment grade ratings would adversely affect the Company's cost of funds and could adversely affect liquidity and access to capital markets. * The Company's results are affected by competitive conditions and customer preferences. Demand for the Company's products, which impacts revenue and profit margins, is affected by (i) the development and timing of the introduction of competitive products; (ii) the Company's response to downward pricing to stay competitive; (iii) changes in customer order patterns, such as changes in the levels of inventory maintained by customers and the timing of customer purchases which may be affected by announced price changes, changes in the Company's incentive programs, or the customer's ability to achieve incentive goals; and (iv) changes in customers' preferences for our products, including the success of products offered by our competitors, and changes in customer designs for their products that can affect the demand for some of the Company's products. * Foreign currency exchange rates and fluctuations in those rates may affect the Company's ability to realize projected growth rates in its sales and earnings. Because the Company's financial statements are denominated in U.S. dollars and approximately two-thirds of the Company's revenues are derived from outside the United States, the Company's results of operations and its ability to realize projected growth rates in sales and earnings could be adversely affected if the U.S. dollar strengthens significantly against foreign currencies. * The Company's growth objectives are largely dependent on the timing and market acceptance of its new product offerings, including its ability to continually renew its pipeline of new products and to bring those products to market. This ability may be adversely affected by difficulties or delays in product development, such as the inability to identify viable new products, obtain adequate intellectual property protection, or gain market acceptance of new products. There are no guarantees that new products will prove to be commercially successful. * The Company's future results are subject to fluctuations in the costs and availability of purchased components, compounds, raw materials and energy, including oil and natural gas and their derivatives, due to shortages, increased demand, supply interruptions, currency exchange risks, natural disasters and other factors. The Company depends on various components, compounds, raw materials, and energy (including oil and natural gas and their derivatives) supplied by others for the manufacturing of its products. It is possible that any of its supplier relationships could be interrupted due to natural and other disasters and other events, or be terminated in the future. Any sustained interruption in the Company's receipt of adequate supplies could have a material adverse effect on the Company. In addition, while the Company has a process to minimize volatility in component and material pricing, no assurance can be given that the Company will be able to successfully manage price fluctuations or that future price fluctuations or shortages will not have a material adverse effect on the Company. * Acquisitions, strategic alliances, divestitures, and other unusual events resulting from portfolio management actions and other evolving business strategies, and possible organizational restructuring could affect future results. The Company monitors its business portfolio and organizational structure and has made and may continue to make acquisitions, strategic alliances, divestitures and changes to its organizational structure. With respect to acquisitions, future results will be affected by the Company's ability to integrate acquired businesses quickly and obtain the anticipated synergies. * The Company's future results may be affected if the Company generates fewer productivity improvements than estimated. The Company utilizes various tools, such as Lean Six Sigma, to improve operational efficiency and productivity. There can be no assurance that all of the projected productivity improvements will be realized. * The Company employs information technology systems to support its business, including ongoing phased implementation of an enterprise resource planning (ERP) system on a worldwide basis over the next several years. Security breaches and other disruptions to the Company's information technology infrastructure could interfere with the Company's operations, compromise information belonging to the Company and its customers and suppliers, and expose the Company to liability which could adversely impact the Company's business and reputation. In the ordinary course of business, the Company relies on information technology networks and systems, some of which are managed by third parties, to process, transmit and store electronic information, and to manage or support a variety of business processes and activities. Additionally, the Company collects and stores certain data, including proprietary business information, and may have access to confidential or personal information in certain of our businesses that is subject to privacy and security laws, regulations and customer-imposed controls. Despite our cybersecurity measures (including employee and third-party training, monitoring of networks and systems, and maintenance of backup and protective systems) which are 10 Table of Contents continuously reviewed and upgraded, the Company's information technology networks and infrastructure may still be vulnerable to damage, disruptions or shutdowns due to attack by hackers or breaches, employee error or malfeasance, power outages, computer viruses, telecommunication or utility failures, systems failures, natural disasters or other catastrophic events. While we have experienced, and expect to continue to experience, these types of threats to the Company's information technology networks and infrastructure, none of them to date has had a material impact to the Company. There may be other challenges and risks as the Company upgrades and standardizes its ERP system on a worldwide basis. Any such events could result in legal claims or proceedings, liability or penalties under privacy laws, disruption in operations, and damage to the Company's reputation, which could adversely affect the Company's business. * The Company's future results may be affected by various legal and regulatory proceedings and legal compliance risks, including those involving product liability, antitrust, environmental, the U.S. Foreign Corrupt Practices Act and other antibribery, anti-corruption, or other matters. The outcome of these legal proceedings may differ from the Company's expectations because the outcomes of litigation, including regulatory matters, are often difficult to reliably predict. Various factors or developments can lead the Company to change current estimates of liabilities and related insurance receivables where applicable, or make such estimates for matters previously not susceptible of reasonable estimates, such as a significant judicial ruling or judgment, a significant settlement, significant regulatory developments or changes in applicable law. A future adverse ruling, settlement or unfavorable development could result in future charges that could have a material adverse effect on the Company's results of operations or cash flows in any particular period. For a more detailed discussion of the legal proceedings involving the Company and the associated accounting estimates, see the discussion in Note 13 \"Commitments and Contingencies\" within the Notes to Consolidated Financial Statements. Item 1B. Unresolved Staff Comments. None. Item 2. Properties. 3M's general offices, corporate research laboratories, and certain division laboratories are located in St. Paul, Minnesota. The Company operates 89 manufacturing facilities in 29 states. The Company operates 127 manufacturing and converting facilities in 38 countries outside the United States. 3M owns the majority of its physical properties. 3M's physical facilities are highly suitable for the purposes for which they were designed. Because 3M is a global enterprise characterized by substantial intersegment cooperation, properties are often used by multiple business segments. Item 3. Legal Proceedings. Discussion of legal matters is incorporated by reference from Part II, Item 8, Note 13, \"Commitments and Contingencies,\" of this document, and should be considered an integral part of Part I, Item 3, \"Legal Proceedings.\" Item 4. Mine Safety Disclosures. Pursuant to Section 1503 of the Dodd-Frank Wall Street Reform and Consumer Protection Act (the \"Act\"), the Company is required to disclose, in connection with the mines it operates, information concerning mine safety violations or other regulatory matters in its periodic reports filed with the SEC. For the year 2013, the information concerning mine safety violations or other regulatory matters required by Section 1503(a) of the Act is included in Exhibit 95 to this annual report. 11 Table of Contents PART II Item 5. Market for Registrant's Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities. Equity compensation plans' information is incorporated by reference from Part III, Item 12, \"Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters,\" of this document, and should be considered an integral part of Item 5. At January 31, 2014, there were 91,440 shareholders of record. 3M's stock is listed on the New York Stock Exchange, Inc. (NYSE), the Chicago Stock Exchange, Inc., and the SWX Swiss Exchange. 3M has historically declared and paid cash dividends in the same quarter. Cash dividends declared totaled $0.635 per share for the first three quarters of 2013. Cash dividends declared in the fourth quarter of 2013 included a dividend payable in November 2013 of $0.635 per share and a dividend payable in March 2014 of $0.855 per share. Cash dividends declared totaled $0.59 per share for each quarter of 2012. Stock price comparisons follow: Stock price comparisons (NYSE composite transactions) (Per share amounts) 2013 High 2013 Low 2012 High 2012 Low $ Second Quarter First Quarter $ 106.88 93.96 90.00 82.70 $ $ 113.25 102.89 89.95 81.99 Fourth Quarter Third Quarter $ $ 122.27 108.21 94.30 85.34 $ $ Total 140.43 116.65 95.46 86.74 $ $ 140.43 93.96 95.46 81.99 12 Table of Contents Issuer Purchases of Equity Securities Repurchases of 3M common stock are made to support the Company's stock-based employee compensation plans and for other corporate purposes. In February 2011, 3M's Board of Directors authorized the repurchase of up to $7.0 billion of 3M's outstanding common stock, with no pre-established end date. In February 2013, 3M's Board of Directors replaced the February 2011 repurchase program with a new repurchase program. This new program authorizes the repurchase of up to $7.5 billion of 3M's outstanding common stock, with no pre-established end date. In February 2014, 3M's Board of Directors replaced the Company's February 2013 repurchase program with a new repurchase program. This new program authorizes the repurchase of up to $12 billion of 3M's outstanding common stock, with no pre-established end date. Issuer Purchases of Equity Securities (registered pursuant to Section 12 of the Exchange Act) Period January 1-31, 2013 February 1-28, 2013 March 1-31, 2013 Total January 1-March 31, 2013 April 1-30, 2013 May 1-31, 2013 June 1-30, 2013 Total April 1-June 30, 2013 July 1-31, 2013 August 1-31, 2013 September 1-30, 2013 Total July 1-September 30, 2013 October 1-31, 2013 Total Number of Shares Purchased (1) 1,664,478 3,199,508 2,995,946 7,859,932 2,739,109 6,626,563 1,930,590 11,296,262 4,367,343 4,248,029 4,885,431 13,500,803 6,379,918 Average Price Paid per Share $ $ $ $ $ $ $ $ $ $ $ $ $ 97.17 103.21 105.13 102.66 105.56 110.46 109.34 109.08 114.23 115.44 118.91 116.31 121.62 Total Number of Shares Purchased as Part of Publicly Announced Plans or Programs (2) 1,634,216 2,644,039 2,981,063 7,259,318 2,730,861 6,594,113 1,930,331 11,255,305 4,359,967 4,246,000 4,868,307 13,474,274 6,334,328 Maximum Approximate Dollar Value of Shares that May Yet Be Purchased under the Plans or Programs (Millions) $ $ $ $ $ $ $ $ $ $ $ $ $ 2,306 7,227 6,913 6,913 6,625 5,897 5,685 5,685 5,187 4,697 4,118 4,118 3,348 November 1-30, 2013 December 1-31, 2013 Total October 1-December 31, 2013 Total January 1-December 31, 2013 3,769,708 2,638,987 12,788,613 45,445,610 $ $ $ $ 129.01 130.53 125.64 114.78 3,768,421 2,637,697 12,740,446 44,729,343 $ $ $ $ 2,862 2,518 2,518 2,518 (1) The total number of shares purchased includes: (i) shares purchased under the Board's authorizations described above, and (ii) shares purchased in connection with the exercise of stock options. (2) The total number of shares purchased as part of publicly announced plans or programs includes shares purchased under the Board's authorizations described above. 13 Table of Contents Item 6. Selected Financial Data. (Dollars in millions, except per share amounts) Years ended December 31: Net sales Net income attributable to 3M Per share of 3M common stock: Net income attributable to 3M basic Net income attributable to 3M diluted Cash dividends declared per 3M common share Cash dividends paid per 3M common share At December 31: Total assets Long-term debt (excluding portion due within one year) and long-term capital lease obligations 2013 $ 2012 30,871 4,659 $ 29,904 4,444 2011 $ 29,611 4,283 2010 $ 26,662 4,085 2009 $ 23,123 3,193 6.83 6.05 5.72 4.56 6.72 6.32 5.96 5.63 4.52 3.395 2.36 2.20 2.10 2.04 2.54 $ 6.40 2.36 2.20 2.10 2.04 33,550 4,384 $ 33,876 4,987 $ 31,616 4,563 $ 30,156 4,277 $ 27,250 5,204 3M has historically declared and paid dividends in the same quarter. In December 2013, 3M's Board of Directors declared a first-quarter 2014 dividend of $0.855 per share (payable in March 2014). This resulted in total year 2013 declared dividends of $3.395 per share, with $2.54 per share paid in 2013 and the additional $0.855 per share to be paid in March 2014. Items included in the preceding table which had a significant impact on results are summarized as follows. 2010 included a one-time, non-cash income tax charge of $84 million, or 12 cents per diluted share, resulting from the March 2010 enactment of the Patient Protection and Affordable Care Act, including modifications made in the Health Care and Education Reconciliation Act of 2010. 2009 results included net losses that decreased operating income by $194 million and net income attributable to 3M by $119 million. 2009 included restructuring actions ($209 million pre-tax, $128 million after tax and noncontrolling interest), which were partially offset by a gain on sale of real estate ($15 million pre-tax, $9 million after tax). 14 Table of Contents Item 7. Management's Discussion and Analysis of Financial Condition and Results of Operations. Management's Discussion and Analysis of Financial Condition and Results of Operations (MD&A) is designed to provide a reader of 3M's financial statements with a narrative from the perspective of management. 3M's MD&A is presented in eight sections: Overview Results of Operations Performance by Business Segment Performance by Geographic Area Critical Accounting Estimates New Accounting Pronouncements Financial Condition and Liquidity Financial Instruments OVERVIEW 3M is a diversified global manufacturer, technology innovator and marketer of a wide variety of products. As described in Note 15 to the Consolidated Financial Statements, effective in the first quarter of 2013, the Company completed a realignment of its business segments to better serve global markets and customers. In addition, during the first quarter of 2013, as described in Note 16, 3M realigned its geographic area structure to include Puerto Rico in the United States rather than in the Latin America/Canada region. Segment and geographic area information presented herein reflects the impact of these changes for all periods presented. 3M manages its operations in five operating business segments: Industrial; Safety and Graphics; Electronics and Energy; Health Care; and Consumer. From a geographic perspective, any references to EMEA refer to Europe, Middle East and Africa on a combined basis. Fourth-quarter 2013 net income attributable to 3M was $1.103 billion, or $1.62 per diluted share, compared to $991 million, or $1.41 per diluted share, in the fourth quarter of 2012. Fourth-quarter 2013 sales totaled $7.6 billion, an increase of 2.4 percent from the fourth quarter of 2012. 3M achieved organic local-currency sales growth (which includes organic volume and selling price impacts) in all five of its business segments, led by Industrial. Industrial organic local-currency sales increased 5.8 percent, led by advanced materials, automotive OEM, 3M Purification Inc. (filtration products), aerospace, and automotive aftermarket. Organic local-currency sales increased 4.8 percent in Safety and Graphics, led by roofing granules, personal safety, commercial graphics, and architectural markets. Organic local-currency sales grew 3.6 percent in the Health Care business segment, with the strongest sales growth in health information systems, food safety, critical and chronic care, and infection prevention; organic local-currency sales declined in drug delivery systems. Organic local-currency sales increased 1.3 percent in the Consumer business segment, led by the consumer health care and home care businesses. Electronics and Energy organic local-currency sales growth was 0.4 percent, with increases in energy-related sales led by renewable energy and electrical markets. Electronic-related sales declined, with growth in optical systems and electronic solutions more than offset by declines in other businesses. For the Company in total, organic-local currency sales grew 3.4 percent, with higher organic volumes contributing 2.0 percent and selling price increases contributing 1.4 percent. Acquisitions added 0.7 percent to sales, which related to the late November 2012 acquisition of Ceradyne, Inc. Foreign currency translation reduced sales by 1.7 percent year-on-year. From a geographic area perspective, fourth-quarter 2013 organic local-currency sales growth was 4.5 percent in the United States, 3.4 percent in EMEA, 3.3 percent in Asia Pacific, and 2.2 percent in Latin America/Canada. In the U.S., EMEA, and Asia Pacific, all five business segments generated positive organic local-currency sales growth. Organic local-currency sales growth in the United States was led by Industrial, and Safety and Graphics. Organic local-currency sales growth in EMEA was led by Industrial. West Europe grew organically by 3 percent year-on-year, continuing the positive trends 3M has seen in recent quarters. Organic local-currency sales growth in Asia Pacific was led by Consumer, Safety and Graphics, and Health Care. Sales in Japan grew 4 percent organically. China/Hong Kong grew organically by 1 percent, impacted by a strong prior-year comparison of 16 percent growth in the fourth quarter of 2012 and weakness in electronics. Organic local-currency sales growth in Latin America/Canada was positive across most countries, but below recent trend levels for a few reasons. First, slowing in government tenders for infrastructure projects in certain countries impacted sales in Electronics and Energy. Consumer was also soft in the fourth quarter due to weak retail demand and challenging year-on-year comparisons. And lastly, sales in Venezuela declined year-on-year due to the economic and political situation there. Venezuela diluted fourth-quarter organic sales growth in Latin America/Canada by 1.5 percentage points, as 3M continues to work towards minimizing its Bolivar exposure and any associated costs. 15 Table of Contents For total year 2013, net income attributable to 3M was $4.659 billion, or $6.72 per diluted share, compared to $4.444 billion, or $6.32 per diluted share, in 2012, an increase of 6.3 percent on a per diluted share basis. Sales totaled $30.9 billion, an increase of 3.2 percent from 2012. From a business segment perspective, organic local-currency sales growth was 5.0 percent in Health Care, 4.6 percent in Industrial, 4.2 percent in Safety and Graphics, 3.0 percent in Consumer, and was flat in Electronics and Energy. From a geographic area perspective, 2013 organic local-currency sales growth was 7.1 percent in Latin America/Canada, 3.6 percent in Asia Pacific, 3.1 percent in the United States, and 2.1 percent in EMEA. For the Company in total, organic local-currency sales grew 3.4 percent, with higher organic volumes contributing 2.5 percent and selling price increases contributing 0.9 percent. Acquisitions added 1.4 percent to sales, driven by the November 2012 acquisition of Ceradyne, Inc. (Industrial), the September 2012 purchase of the net assets that comprised the business of Federal Signal Technologies Group (Safety and Graphics), and the April 2012 acquisition of CodeRyte, Inc. (Health Care). Foreign currency translation reduced sales by 1.6 percent year-on-year. Operating income in 2013 was 21.6 percent of sales, compared to 21.7 percent of sales in 2012, a decline of 0.1 percentage points. Items that reduced operating income margins included lower factory utilization/productivity, strategic investments (including business transformation, enabled by 3M's global ERP implementation), the impact of 2012 acquisitions, and other factors. These factors were largely offset by the combination of selling price increases and raw material cost decreases, in addition to lower pension/postretirement benefit costs. Refer to the section entitled \"Results of Operations\" for further discussion. The income tax rate was 28.1 percent in 2013, down 0.9 percentage points versus 2012, which increased earnings per diluted share by approximately 9 cents. Weighted-average diluted shares outstanding in 2013 declined 1.4 percent yearon-year to 693.6 million, which increased earnings per diluted share by approximately 9 cents. Foreign exchange impacts decreased earnings per diluted share by approximately 11 cents. Fourth-quarter 2012 net income attributable to 3M was $991 million, or $1.41 per diluted share, compared to $954 million, or $1.35 per diluted share, in the fourth quarter of 2011. Fourth-quarter 2012 sales totaled $7.4 billion, an increase of 4.2 percent from the fourth quarter of 2011. Organic local-currency sales grew 4.3 percent, acquisitions added 0.9 percent to sales, and foreign currency translation reduced sales by 1.0 percent year-on-year. From a business segment perspective, Consumer led with organic local-currency sales growth of 8.8 percent, driven by consumer health care, construction and home improvement markets, and stationery and office supplies. Health Care organic local-currency sales grew 5.9 percent, with positive growth in all businesses, led by food safety, health information systems, critical and chronic care, and oral care. Electronics and Energy organic local-currency sales growth was 4.4 percent, led by optical systems, with sales also increasing in infrastructure protection, electrical, and telecommunication markets, partially offset by declines in renewable energy and electronics markets materials. Industrial organic local-currency sales grew 4.4 percent, led by 3M Purification Inc. (filtration products), aerospace, industrial adhesives and tapes, abrasives and automotive OEM partially offset by declines in advanced materials. Organic local-currency sales declined 0.3 percent in Safety and Graphics, as sales growth in personal safety, architectural markets, commercial graphics, and roofing granules was offset by a year-on-year decline in traffic safety and security systems. From a geographic area perspective, fourth-quarter 2012 organic local-currency sales growth was 9.9 percent in Latin America/Canada, 5.8 percent in Asia Pacific, and 5.2 percent in the United States. EMEA organic local-currency sales declined 1.0 percent, impacted by a weak economy in Western Europe. Latin America/Canada sales growth was broadbased, with all five business segments generating positive organic local-currency sales growth, led by Health Care; Safety and Graphics; Electronics and Energy; and Consumer. Organic local-currency sales growth increased 11 percent in Brazil, in the face of a still-recovering economy, and Mexico grew nearly 10 percent. In Asia Pacific, Japan declined year-on-year, reflecting continued challenging economic conditions. Organic local-currency sales in the rest of Asia Pacific grew nearly 10 percent, with China up over 16 percent. Organic local-currency sales growth in the United States was led by Consumer. For total year 2012, net income attributable to 3M was $4.444 billion, or $6.32 per diluted share, compared to $4.283 billion, or $5.96 per diluted share, in 2011, an increase of 6.0 percent on a per diluted share basis. Sales totaled $29.9 billion, an increase of 1.0 percent from 2011. Organic local-currency sales grew 2.6 percent, acquisitions added 0.8 percent to sales and foreign currency translation reduced sales by 2.4 percent year-on-year. From a business segment perspective, organic local-currency sales growth was 5.2 percent in Industrial, 4.7 percent in Health Care, 3.6 percent in Consumer, and 2.4 percent in Safety and Graphics. Organic local-currency sales declined 3.7 percent in Electronics and Energy. From a geographic area perspective, 2012 organic local-currency sales growth was 11.1 percent in Latin America/Canada, 4.2 percent in the United States, and 0.1 percent in Asia Pacific. Asia Pacific was impacted by a soft global consumer electronics industry. EMEA organic local-currency sales declined 0.6 percent, impacted by a weak economy in Western Europe. 16 Table of Contents Operating income in 2012 was 21.7 percent of sales, compared to 20.9 percent of sales in 2011, an improvement of 0.8 percentage points. The primary benefit (as discussed in the Results of Operations section) related to the combination of selling price increases and raw material cost decreases. Currency effects reduced diluted earnings per share by an estimated 15 cents. Net insurance recoveries in 2012 related to the 2011 earthquake and tsunami in Japan increased earnings by approximately 4 cents per diluted share. In 2011, the impact of natural disasters, net of insurance recoveries, reduced earnings by approximately 6 cents per diluted share. Early retirement/restructuring costs for 2012 totaled approximately 8 cents per diluted share, which included the first quarter 2012 charge of approximately 3 cents per diluted share related to a voluntary early retirement program in the United States. The most significant non-operating items that impacted earnings in 2012 when compared to 2011 were diluted shares outstanding and income taxes. Average diluted shares outstanding declined 2.2 percent in 2012 to 703.3 million, which increased earnings per diluted share by approximately 14 cents when compared to 2011. The income tax rate for 2012 was 29.0 percent compared to 27.8 percent in 2011, which decreased earnings per diluted share by approximately 11 cents. The following table contains sales and operating income results by business segment for the years ended December 31, 2013 and 2012. In addition to the discussion below, refer to the section entitled \"Performance by Business Segment\" and \"Performance by Geographic Area\" later in MD&A for a more detailed discussion of the sales and income results of the Company and its respective business segments (including Corporate and Unallocated). Refer to Note 15 for additional information on business segments, including Elimination of Dual Credit. (Dollars in millions) Business Segments Industrial Safety and Graphics Electronics and Energy Health Care Consumer Corporate and Unallocated Elimination of Dual Credit Total Company Net Sales $ 10,584 5,657 5,393 5,334 4,435 8 (540) $ 30,871 2013 % of Total Oper. Income Net Sales 34.3% $ 2,296 $ 9,943 18.3% 1,239 5,471 17.5% 954 5,458 17.3% 1,672 5,138 14.4% 945 4,386 % (322) 4 (1.8)% (118) (496) 100.0% $ 6,666 $ 29,904 2012 % of Total Oper. Income 33.2% $ 2,236 18.3% 1,217 18.3% 1,026 17.2% 1,641 14.7% 943 % (471) (1.7)% (109) 100.0% $ 6,483 2013 vs. 2012 % change Net Oper. Sales Income 6.5% 3.4% (1.2)% 3.8% 1.1% 3.2% 2.7% 1.8% (7.0)% 1.9% 0.2% 2.8% Sales in 2013 increased 3.2 percent, led by Industrial at 6.5 percent, Health Care at 3.8 percent, and Safety and Graphics at 3.4 percent. Sales increased 1.1 percent in Consumer and declined 1.2 percent in Electronics and Energy. Total company organic local-currency sales growth (which includes organic volume and selling price impacts) was 3.4 percent, acquisitions added 1.4 percent, and foreign currency translation reduced sales by 1.6 percent. Four of 3M's five business segments posted operating income margins in excess of 21 percent in 2013. Worldwide operating income margins for 2013 were 21.6 percent, compared to 21.7 percent for 2012. Sales in 2012 increased 1.0 percent, led by Consumer at 3.7 percent, Industrial at 3.3 percent and Health Care at 2.5 percent. Sales increased 0.2 percent in Safety and Graphics, and declined 4.8 percent in Electronics and Energy. Total company organic local-currency sales growth was 2.6 percent, acquisitions added 0.8 percent, and foreign currency translation reduced sales by 2.4 percent. Four of 3M's five business segments posted operating income margins in excess of 21 percent in 2012. Worldwide operating income margins for 2012 were 21.7 percent, compared to 20.9 percent for 2011. 3M generated $5.817 billion of operating cash flow in 2013, an increase of $517 million when compared to 2012. This followed an increase of $16 million when comparing 2012 to 2011. Refer to the section entitled \"Financial Condition and Liquidity\" later in MD&A for a discussion of items impacting cash flows. In February 2014, 3M's Board of Directors authorized the repurchase of up to $12 billion of 3M's outstanding common stock, which replaced the Company's February 2013 repurchase program. This new program has no pre-established end date. In 2013, the Company purchased $5.212 billion of stock, up significantly from $2.204 billion in 2012 and $2.701 billion in 2011. The Company expects to purchase $3 billion to $5 billion of stock in 2014. In December 2013, 3M's Board of Directors declared a firstquarter 2014 dividend of $0.855 per share, an increase of 34.6 percent. This marked the 56th consecutive year of dividend increases for 3M. 3M's debt to total capital ratio (total capital defined as debt plus equity) was 25 percent at 17 Table of Contents December 31, 2013, 2012 and 2011. 3M has an AA- credit rating with a stable outlook from Standard & Poor's and an Aa2 credit rating with a stable outlook from Moody's Investors Service