You are working with the plumber regarding the sanitary drainage pipe that needs to be installed to connect the new ensuite as part of the addition at Lot 70 Change st

After looking at the job you believe it would be best to bring the drainage pipe work down through the robe in bedroom 2 and box it out in the cupboard to conceal it.

This will require an amount of work to cut and remove the existing concrete, then to dig beneath the existing footings to connect to the drainage that is running along the back of the house, as detailed in the attached plans.

John has asked if you can forward him a drawing of what you propose for consideration, as well as a list of equipment that would be needed for the job.

Based on this information you are required to

1. Review the plans in the supporting documentation to ascertain the location of the pipework outside. 2. Based on the plans and template provided you will need to draw a sectional diagram of the proposed sanitary pipe work. 3. In the ID5f Elevated pipework specifications provided, in the 3rd slide, draw in where it would be best to run the 100mm PVC drain down through the slab, under the footing, and connect into the existing drainage system that is running along the back of the house as pictured 4. You will also need to note where the boxing will be installed around the pipework to conceal it within the wardrobe. 5. Ensure the Title block provided in the template is completed. 6. Respond back to John via email with a brief explanation of the sectional drawing and a list of tools and checks that should be carried out for this equipment before attending the site.

resourses required

https://1drv.ms/b/s!AkXe63rt-D4Y-1e3REMwXU3OVMiF?e=vMOpmY

(ID5f) Elevated Pipe Work Specification (Task 3).pdf