1410. Select all that apply. Identify the procedures to be planned for safe operations within minimum distances set by Table A of Section 1408 from the list below: Any reclosing feature of a circuit interrupting device must be made inoperative Utilize a dedicated spotter in continuous contact with the crane operator Use an elevated warning line or barricade Use an insulated link device between the end of the load line and load Use nonconductive rigging Set automatic range limiters if crane is so equipped Use nonconductive tag lines if tag lines are required Set perimeter barricades at 10 feet from equipment Prohibit all workers other than the crane operator from touching the load line above the link insulator or touching the crane. Allow only essential personnel in the area of the crane and load Properly ground equipment Install an insulated blanket or cover over the utility line unless voltage prohibits