192.168.0.0/24 NAT 209.165.200.224 SO/0/0 .225 .254 S1 R1 ISP Gi0/0 .1 .10 - .254 R1(config)# ip nat inside source static 192.168.0.10 209.165.200.225 R1(config)# interface gigabitEthernet 0/0 R1(config-if)# ip address 192.168.0.1 255.255.255.0 R1(config-if)# ip nat inside R1(config-if)# exit Internal LAN R1(config)# interface Serial0/0/0 R1(config-if)# ip address 209.165.200.225 255.255.255.224 R1(config-if)# ip nat outside APC in the internal LAN 192.168.0.10 pings a server on the internet with IP 167.43.2.112 with no NAT. The network administrator then displays the NAT translation table on the router. What is the "Outside local address" that will be listed on this table? Briefly state what the term "Outside global" refers to