20 lbs What loads P and V are applied to each bolt? Note, you are required to use the singularity functions. Bolts are evenly spaced in a 2x2 grid, with the maximum dimensions of the grid being 10 inches and 12 inches. You do not need to do shear/bending moment diagrams, or look at deflection. You can ignore the effect the 0.19" wider flange area has on the stiffness of the beam (24" beam length includes the 0.19" flange) Note that the edge of the flange is 1" away from the center of the bolt holes. What is the stiffness of the joint, assuming a %4-20 bolt? Assume beam is 6061-T6, as is the wall. Assume the bolt hole is oversized by 0.030" Assume the bolts go into inserts. Joint is not lubricated. You must use SAE Grade 2 Bolts Assume no washers. 10 lb/in L=6" A B 12 in 20 lbs 10 lb/in 10 in Length = 24" 0.19" flange Close up of hole spacing to edge of flange. 1"