5. Refer to the network topology diagram to complete this scenario. List the commands in the correct sequence (top to bottom) to configure and apply a standard ACL that will control access to host 192.168.4.12. Both the 192.168.1.66 host and all hosts in the 192.168.2.0 LAN should be permitted access to this host. All other networks should not be able to access the 192.168.4.12 92.168.1.66 92 168 3.77 Gi0/1 172.16.1.0/30 192.168.2.0/24 OYOND Svo GIO/D R2 92.168.1.0/24 G0/1 LAN 92.168 3.0/24 LAN3 192.168.4.0/24 LAN4 LAN2 192.168.4.12 Write sequence number starting from 1 to 4 next to each item in the list in the order Not all the statements are needed R2 Configuration Commands access-list 66 penit 92.168.1.66 0.0.0.0 access-list 66 permit 92.168.2.0 0.0.0.255 access-list 66 deny 192.168.2.0 0.0.0.255 interface g10/1 ip acceas-group 66 out p access-group 66 in