Altex Inc. manufactures two products car wheels and truck wheels. To determine the amount of overhead to assign to each product line, the controller, Robert Hermann, has developed the following information Car Estimated wheels produced Direct labor hours per wheel 38,000 1 Truck 14,000 3 Total estimated overhead costs for the two product lines are $ 848,000. Calculate overhead rate. (Round answer to 2 decimal places, eg. 12.25.) Overhead rate per direct labor hour Compute the overhead cost assigned to the car wheels and truck wheels, assuming that direct labor hours is used to assign overhead costs Car wheels Truck wheels $ eTextbook and Media Hermann is not satisfied with the traditional method of allocating overhead because he believes that most of the overhead costs relate to the truck wheels product line because of its complexity. He therefore develops the following three activity cost pools and related cost drivers to better understand these costs. Estimated Overhead Activity Cost Pools Costs Setting up machines $240.000 Assembling 320,000 Inspection 288.000 Estimated Use of Cost Drivers 1,000 setups 80,000 labor hours 1.200 inspections Compute the activity-based overhead rates for these three cost pools. Compute the activity-based overhead rates for these three cost pools. Overhead Rates Setting up machines $ setup Assembling $ /DLH Inspection $ /inspection eTextbook and Media Compute the cost that is assigned to the car wheels and truck wheels product lines using an activity-based costing system. given the following information Use of Cost Drivers per Product Car Truck Number of setups 200 800 Direct labor hours 38,000 42.000 Number of inspections 1.100 100 Use of Cost Drivers per Product Car Truck Number of setups 200 800 Direct labor hours 38.000 42,000 Number of inspections 1,100 100 Car Wheels Truck Wheels Setting up machines $ Assembling $ Inspection $ Total cost assigned $ $