Answer as many as you can please. Thank you in advance!

Which of the following receptor types, or impact vectors, is not explicitly addressed in MIL-STD-882E? a. Workplace Safety b. Community Safety c. Environment d. Assets ALARP is a criterion of risk established by the Health and Safety Executive of the United Kingdom. ALARP stands for a. Above Lowest Acceptable Risk Parameters b. Actual Legal And Regulatory Practice c. Always Looking About Right, Politically d. As Low As Reasonably Practicable Of the following methods for bypassing a SIF, which is the recommended method? a. Modifying the software at the time the SIF needs to be bypassed b. A password-protected software switch with manual clearing c. Disconnecting or jumper the leads of the instrument d. Inserting a dummy signal into the logic solver 1/0 card A beverage manufacturing company uses a pair of pumps to transfer flavored syrups to the bottling line, with one at a time in use and the other on stand-by. Each pump has a of 0.045 failures per year and of 0.05 . What is the probability that both pumps will fail due to common causes during a 55 day production run? a. 0.000046 b. 0.00036 c. 0.0068 d. 2.88 When an isorisk line is plotted on a log-log scale of likelihood and impact severity, a. Each point on the line has the same risk as every other point on the line. b. The line curves, approaching both axes asymptotically. c. The line is horizontal, intersecting with the tolerable risk d. The line starts at the origin of the plot and extends up and to the right at a 45 angle. Which of the following statements is true? a. It is possible to use non-standard enabling conditions or IPLS, or nonstandard failure rates, as long as there is adequate support for their use. b. Only the standard four enabling conditions should be used in LOPA. c. Only the standard IPLs listed in the LOPA tool should be used in LOPA. d. The PFDAvg for any IPL used in LOPA must be 0.1