Bob Fusso, cost accounting manager for Hemple Products, was asked to determine the costs of the activities performed within the company's Manufacturing Engineering Department. The department has the following activities: creating bills of materials (eOMs), studying manufacturing capabilities, improving manufacturing processes, training employees, and designing toois. The resource costs (from the general ledger) and the times to perform one unit of esch activir are provided below. Total machine and labor hours (at practical capacity): The activity, designing tools, uses the number of tools designed as the activity driver. Using a traditional aporoach, the cost of the designing tools activity was determined to be $179,000 with an expected activity output of 1,000 for the coming vear. During the first week of the year, two jobs (job 150 and Job 151 ) had a demand for 10 and 20 new toois, respectively. Required: 1. Calculate the capacity cost rate for the Manufacturing Engineering Department. Round your answer to the nearest cent. per hour 2. Using the capacity cost rate, determine the activity rates for each activity. Round your answers to the nearest cent. Required: 1. Calculate the capacity cost rate for the Manufacturing Engineering Department. Round your answer to the nearest cent. per hour 2. Using the capocity cost rate, determine the activity rates for each activity. Round your answers to the nearest cent. 3. Calculate the cost of designing tools that would be assigned to each job using the TDABC-derived activity rate and then repeat using the traditional ABC rate. 4. Now suppose that time for creating toMs is 0.7 for a standard product but that creating a BOM for a custom product adds an additional 0.5 houn Express the time equetion for this odded complexity. Round your answers to two decimal places. Place the amounts left to right, lowest to highest. BOM timen = Calculate the activity rate for the activity of creating a BOM for custom products. Round your answer to the nearest cent. per BOM