C++

Suture Packaging. Sutures are strands or fibers used to sew living tissue together after an injury or an operation. Packages of sutures must be sealed carefully before they are shipped to hospitals so that contaminants cannot enter the packages. The object that seals the package is referred to as a sealing die. Generally, sealing dies are heated with an electric heater. For the sealing process to be a success, the sealing die is maintained at an established temperature and must contact the package with a predetermined pressure for an established time period. The period in which the sealing die contacts the package is called the dwell time. Assume that the acceptable range of parameters for an acceptable seal are the following: Temperature: 150-170 degrees C Pressure: Dwell time: 2-2.5 60-70 psi 24. A data file named suture.txt contains information on batches of sutures that have been rejected during a one-week period. Each line in the data file contains the batch number, temperature, pressure, and dwell time for a rejected batch. The quality control engineer would ike to analyze this information and needs a report that computes the percent of the batches rejected due to temperature, the percent rejected due to pressure, and the percent rejected due to dwell time. It is possible that a specific batch may have been rejected for more than one reason, and it should be counted in all applicable totals. Write a program to compute and print these three percentages