Check my wor Problem 10A-12 Selection of a Denominator; Overhead Analysis; Standard Cost Card [LO10-3, LO10-4 Morton Company's budgeted variable manufacturing overhead is $2.50 per direct labor-hour and its budgeted fixed manufacturing overhead is $350,000 per year. The company manufactures a single product whose standard direct labor-hours per unit is 2.0 hours. The standard direct labor wage rate is $25 per hour. The standards also allow 5 feet of raw material per unit at a standard cost of $5 per foot Although normal activity is 50,000 direct labor-hours each year, the company expects to operate at a 40,000-hour level of activity this year Required: 1. Assume that the company chooses 40,000 direct labor-hours as the denominator level of activity. Compute the predetermined overhead rate, breaking it down into variable and flxed cost elements. 2. Assume that the company chooses 50,000 direct labor-hours as the denominator level of activity. Compute the predetermined overhead rate, breaking it down into variable and fixed cost elements 3. Complete two standard cost cards as outlined below 4. Assume that the company actually produces 22,100 units and works 47.000 direct labor-hours during the year Actual manufacturing overhead costs for the year are: Variable manafaceturing overhead cost 124,100 Fixed manufacturing overhead cost Total manufacturing overhead cost 479,100 a. Compute the standard direct labor-hours allowed for this year's production. 40.000 direct labor-hours (normal activity) b. Complete the Manufacturing Overhead T-account below. Assume that the company uses as the denominator activity figure in computing predetermined overhead rates, as you c. Determine the cause of the underapplied or overapplied overhead for the year by computing efficiency variances and the fixed overhead budget and volume variances the variable overhead rate and Prev f Next 889 8 0. 1