Client #1 IP 160.16.0.3 MAC 00:01:02:03:04:22 Client #2 IP 160.16.0.11 Client #3 Web Server MAC 00:01:02:03:04:06 IP 160.16.0.10 IP 160.16.0.70 MAC 00:01:02:03:04:07 Interface Fa0/0 Interface Fao MAC 00:01:02:03:04:33 IP 160.16.0.1 IP 160.16.0.65 MAC 00:01:02:03:04:A1 MAC 00:01:02:03:04:11 1000000000 IP Router Ethernet Ethernet Ethernet Hub Hub Switch Refer to the network figure above, showing two Ethernet Subnets connected through an IP Router, for questions #1 to #5. For each device, both its Internet Protocol (IP) address and its MAC address (also called the Physical address or the Ethernet address) are shown. The Subnet Mask used by all devices is 255.255.255.240 (which is same as prefix length "/28"). Now, assume that Client #1 transmits a packet to the Web Server. What are the specific numeric address values (copied from the diagram above) that will be in each of the following header fields of this packet sent by Client #1? a) (2 points) Source Address in Ethernet header b) (3 points) Destination Address in Ethernet header c) (2 points) Source Address in IP header d) (3 points) Destination Address in IP header