Configure the frame-relay on R1, R2 & R3. Assign an IP address for every interface seen in the diagram 2) Configure OSPF on R1, R2, and R3 as a broadcast network

 Configure RIP on R3 and R4.Redistribute OSPF and RIP on R3 4) Configure SW1 (Vlans10, Vlan20 & Vlan30) 5) Access-list should be configured at R1  a) Network B 202.100.50.X should not be able to telnet SW1 30.5.3.1  b) Network C 203.100.50.Xshould not access FTP server 20.5.3.100  c) Network D 204.100.50.X should not access web server 20.5.3.100  d) Network B should not ping Network A vlan_20 20.5.3.X  e) All other services apart from what has been denied, must be permitted

6)SW1 connected to the specific telephone which should be configured at Router 1

05PF ARGO#2 Fol24 SWITCH 2 NET B 202.100.50.33/28 VOIGE ULAN TO 1 10.53 1/24 NET D 204.100.50-65/28 Fole OSPF Foll Raplep 29.5.3.11/24 Fol24 SWITCH 4 D DATA ULAN 20 AREA#C sold R | RIP F/2 Folo www FTP Fol24 SWITCH 1 FOL3 Fold RE Foll Foll Fol2 | R Fold 30.5.3.1/24 OSPF AREA, Fol24 SWITCH 3 VLAN 3Q 20.5.3.100/24 [NET A LN_20] ULAM 10 Fol2 UOICE ULANY 10 -10.5.3.2/24 1 2 DATA ULAN 20 20.5. 5.3.2/24 #31 AIET_C 203-100.50.49/28 1