DESIGN PROJECT 9.1 Design of an Oil Cooler for Marine Applications The following specifications are given: Fluid Inlet temperature (C) Outlet temperature (C) Pressure drop limit (kPa) Total mass flow rate (kg/s) SAE-30 Oil 65 56 140 20 Sea Water 20 32 40 A shell-and-tube heat exchanger type with geometrical parameters can be selected. The heat exchanger must be designed and rated. Different configura tions of shell-and-tube types can be tested. A parametrical study is expected to develop with a suitable final design; mechanical design will be performed DESIGN PROJECT 9.1 Design of an Oil Cooler for Marine Applications The following specifications are given: Fluid Inlet temperature (C) Outlet temperature (C) Pressure drop limit (kPa) Total mass flow rate (kg/s) SAE-30 Oil 65 56 140 20 Sea Water 20 32 40 A shell-and-tube heat exchanger type with geometrical parameters can be selected. The heat exchanger must be designed and rated. Different configura tions of shell-and-tube types can be tested. A parametrical study is expected to develop with a suitable final design; mechanical design will be performed