Duration-Based Costing Gee Manufacturing produces two models of camshafts used in the production of automobile engines: Regular and High Performance. Gee currently uses an ABC system to assign costs to the two products. For the coming year, the company has the following overhead activities, costs, and activity drivers: Activity Setups Expected Cost $214,612 Activity Driver Setup hours Machine hours Move hours Activity Capacity 10,000 20,000 5,000 Machining Moving $420,000 $112,500 $747,112 Total OH At practical capacity, the expected activity demands for each product are as follows: Units completed Setup hours Machine hours Moving hours Regular Performance Model 30,000 8,000 6,000 1,000 High Performance Model 8,000 2,000 14,000 4,000 The production cycle time for the regular performance camshaft is 0.50 (hours per unit) and that of the high performance camshaft is 2.5 (hours per unit). Required: 1. Calculate the consumption ratios for each activity. Use these consumption ratios to assign the total overhead to each camshaft model and then calculate the overhead cost per unit for each model (round unit cost to two decimal places). Setups Machining Moving Reg. Perf. Model High Perf. Model GES Unit overhead cost: Reg. Perf. Model High Perf. Model $ $ 10.67 53.37 2. Calculate the total and per unit overhead assigned to each model using DBC (assume you only know cycle time, total overhead costs, and units at practical capacity). Round the overhead rate to four decimal places. Total overhead rate s Total overhead: Reg. Perf. Models High Perf. Models